Kit Lighting Stator + Regulator for Honda XR 100 R 1998 1999 2000 2001 2002 2003

Description: Free shipping in USA 2 year warranty Same day shipping visit our store > --> find parts for : ATV / UTV / SXS Motorcycles Snowmobiles Watercraft Other Menu Store Home ATV / UTV / SXS Motorcycles Snowmobiles Watercraft Other IMPORTANT - Important notice about the product.--> Kit Lighting Stator + Regulator for Honda XR 80 / 100 R | CRF 80 / 100 F 1992-2013 | OEM # 31120-GN1-691 / 31120-KN4-751 KEY FEATURES Brand new aftermarket stator + regulator rectifier kit Precise voltage control, eliminates light burnout Plug-and-play unit, direct fit, easy to install Highest grade of copper winding, resistant to 200 degrees Celsius All products shipped are tested DESCRIPTION Please note: The OEM stator did not include a lighting coil because no lights come on the bike. If you would like to add a headlight and/or taillight, our stator includes a 100 Watt lighting coil between the Yellow wire and ground. The Black wire from the regulator needs to be grounded to the frame, and the Yellow wire is connected to the Yellow wire from the stator and also to your lights (the other side of your lights are grounded to the frame to complete the circuit). A new regulator must be used to support the lighting. Please note: the body is different than the OEM (fix it with only one screw instead of two), but it works on the same models. Please note: this regulator has two wires, yellow to power and black to ground. This part can fits Mitsuba configuration Battery condition is important. No stator or regulator can make up for a bad or weak battery. If in doubt, charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY ! Brand new Kit Lighting Stator + AC Voltage Regulator Rectifier All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part All products shipped are tested Brand new aftermarket stator Direct replacement to your original unit Plug-and-play, direct fit, easy installation Highest grade of lamination materials Highest grade of copper winding, resistant to 200 degrees Celsius Pick up pulsar coil included Rubber grommet included Heavy Duty AC Voltage Regulator Rectifier 12 Volts regulator used by Baja winners Heavy duty and improved regulator rectifier For use with all standard halogen and quartz lights Precise voltage control, eliminates light burnout Reduce flickering and dimming Simple installation Works with all other OEM part Rated at 225 watts PAcked with these technologies --> Vehicle models fitment Honda CRF 100 F -- 2004-2009, 2011-2013Honda CRF 80 F -- 2004-2009, 2011-2013Honda XR 100 R -- 1992-2003Honda XR 80 R -- 1993-2003 OEM part replacement 31120-GN1-69131120-KN4-751 Specifications Stator Dimensions: Interior diameter : 30 mm Exterior diameter : 85 mm Thickness : 32 mm Length of wires stator to grommet : 185 mm Length of wires grommet to terminals : 355 mm Length of pickup coil's wire to grommet : 78 mm Other specifications : Number of wires : 3 Number of pins : 3 Wire to wire resistance : Alternator : Yellow to Ground = 0.4 ohms +-20% Pickup : Blue/Yellow to Ground = 120 ohms +-20% Source : Black/Red to Ground = 500 ohms +-20% Voltage Regulator Rectifier Dimensions: Width : 45 mm Length : 45 mm Height: 20 mm Other specifications : Number of pins : 2 Minimum Charging Voltage: 13 V +/- 0.5 V Maximum Charging Current: 6 A - 10 A / 50 W - 200 W Open Circuit Voltage: Operation Temperature: -20? to 85? Please note : this regulator has two wires, yellow to power and black to ground. instructions Before installing your new Stator: Check the AC output of the stator Replace any burned or corroded connectors on stator and regulator rectifier Check and repair any melted wiring Use hi-temp dielectric grease on all connectors Before installing your new Voltage Regulator Rectifier: Check the AC output of the stator Replace any burned or corroded connectors on stator and regulator rectifier Check and repair any melted wiring Use hi-temp dielectric grease on all connectors Our stator might have a different wire color code than your original part. All the wires are installed in the correct order; please do not change any of the wiring configurations. This stator is designed as a direct plug-in replacement and should be used as such. When bolting stator in, always use locking compound. If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible but no less than 0.010". To add headlights to your vehicle: The stator includes a 100 watts lighting coil between the yellow wire and the ground Ground the black wire from the regulator to the frame Connect both yellow wires from the regulator and the lights to the yellow wire from the stator Ground the other side of your lights to the frame to complete the circuit Warning: Risk of electric shock. Disconnect the battery before servicing. Ensure proper installation by a qualified technician to avoid malfunction. customer service AsK seller a question duties & taxes International Buyers: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. More than 20 years of assisting mechanics around the world resolving the worst electrical problems made us know our stuff. When it comes to vehicle electrics, we definitively are the power in powersports. Customer service Part requestAbout usAbout seller pageAdd seller to favorite

Price: 202 CAD

Location: Coaticook, QC

End Time: 2025-01-11T22:28:53.000Z

Shipping Cost: 0 CAD