Latest IOS 15.7 Cisco CCNA v3.0 and CCNP v2.0 LAB KIT CISCO2911

Description: All Units are fully tested. 60-DAYS REPLACEMENT WARRANTY! Please contact us, if you have any question. 1(972)-423-6829Why do I need to buy Hyper Networks Cisco LAB KITs?Firstly; Cisco made CCNA 200-125 V3 exam harder than the CCNA 200-120 V2 exam. Cisco wants to make sure you really know your stuff on this exam. CCNA 200-125 V3 exam includes multiple choice, multiple answer, drag-n-drop, interactive router simulations, testlet and simlet question types. Especially, you need to study with actual devices for understanding interactive router simulations, testlet and simlet question types. You need to have a high-level understanding of what is happening for passing the exam. You need to practice on more complex setups and you need to understand very well what is happening. That is why we set up these lab kits and provide you to work with actual devices.Why do I need a physical router?You need a physical router because:*The simulators don't have the ability to give you the hands on.*You need to see what happens when you disconnect a cable. *You may put a cable in the wrong location or just plain configure the interface incorrectly.*Dependent on what you do by mistake, you may see either the interface or protocol go down. *You can do troubleshoot based upon that it should give you a clue of where to start troubleshooting.*You can see what layer is the interface at and what layer is the protocol at.* You can find quite quickly which mistakes you make on Router 1 which can affects other Routers.*No simulator can simulate that, so real routers and switches are invaluable. Included Items in the lab: Routers:3x Cisco 2911/K9 512 MB Dram / 256 MB Flash 3x Gigabit Ethernet Interfaces on each router 15.7 IOS c2900-universalk9-mz.SPA.157-3.M.bin 4x Serial Interfaces total. License Info Technology Technology-package Technology-package Current Type Next reboot------------------------------------------------------------------------------------------------------ ipbase ipbasek9 Permanent ipbasek9 security None None None data None None None Switch 1 WS-C3560-24TS-S LAYER 3 CCIE level switch IOS c3560-ipservicesk9-mz.150-2.SE8.bin Switch 2 WS-C3560-24PS-S Layer 3 POE LAYER 3 CCIE level switch IOS c3560-advipservicesk9-mz.122-46.SE Switch 3 WS-C3750-24 LAYER 3 CCIE level switch IOS c3750-advipservicesk9-mz.122-44.SE6 Cards: 4x Serial Interface card Cables:3x Ethernet Cable2x T1 Crossover Cable2x Crossover Cable1x Cisco USB Console Cable (USB-RJ45)6x Power Cable1x 12U Desktop RackBonus DVD:TFTP Server Software, Lab Examples and their Solution similar to the CCNP, SECURITY and VOICE labs. How Many Routers Do I Need for my Cisco CCNA Lab?Let`s explain to you what you can do with one, two or three routers.One router will give you the ability to run the commands on it and will allow you to memorize the correct syntax and context in which to run the commands. Two routers will allow you to be able to see route table information propagate, data propagation and path election. In addition, you will see basic device elections. Three or more routers and you will get all the above, more complex topologies and full device elections.We strongly suggest you buy three router kits.How Many Switches Do I Need for my Cisco CCNA Lab?Let`s explain to you what you can do with one, two or three switches.One switch will give you the ability to run the commands on the switch and allow you to memorize the correct syntax and context in which to run the commands. It will also allow you to do some of the VLAN labs. Two switches will allow you to see VTP Domain & VLAN information propagate. In addition, you will see basic device elections. Three or more switches you will get all the above and full device elections.We suggest to you buy our three switch lab kits because of having the best learning experience.Please contact us, if you have any question.1(972)-423-6829

Price: 799.99 USD

Location: Allen, Texas

End Time: 2024-02-28T22:16:21.000Z

Shipping Cost: N/A USD