LAUNCH Creader CR3008 Fault Code Reader Scanner OBD2 EOBD Diagnostic Scan Tool

Description: LAUNCH CR3008 PLUS Obd2 Scanner,Check Engine Fault Code Reader Full OBDII Functions 10 Modes,Mode 6,O2 Sensor Test,EOBD OBDII CAN Diagnostic Scan Tool for All 1996 & Newer Cars 2024 Elite Ver. Live Data Graphing Code Reader👍【WORTH：Code reader car diagnostic tool + Full functions+Mode 6 +Mode 8】CR3008 obd2 scanner can check engine light: ✅retrieve I/M readiness, ✅ live data graph,✅freeze data stream,✅playback data stream✅O2 Sensor, ✅On-board Monitoring (Mode 6),✅EVAP systems(Mode 8) component test,✅Auto vehicle information,✅Upgraded battery Statu graphing. ✅ DTC lookup UCAR TECH offer 5 years warranty for CR3008 OBD2 scanner.It supports lifetime free update 60 day refund and replacement for unsatisfied.Welcome to contact us via Q&A, email, or hotline, and our after-sale-service team LAUNCH CR3008 PLUS OBD2 Scanner Code Reader OBD II Check Engine Car Diagnostic ToolLAUNCH CR3008 PLUS,Professional OBD2 Scanner Diagnostic Tool, Enhanced Check Engine Code Reader with Reset OBDII/EOBD Car Diagnostic Scan Tools for All Vehicles After 1996, 2023 Upgraded,Advanced Ver. of CR319,CR3001 LAUNCH CR3008 PLUS Advatage Features -Full OBD2 Functions : Read codes , erase codes , turn off engine warning light , reset engine light ,read vehicle information etcDTC Lookup ‒ DTC Detailed Description : Read all OBD2 egine fault codes.Turn this OBD2 scanner, into an electronic dictionary of DTCs. Get DTCs' explanation in 2 seconds. Diagnostic Report Sharing via Printing : Data Printing ‒ Print the records saved in reading codes or data stream and share your diagnostic data with others for further analysis. (1) Connect CR3008 PLUS to a PC; (2) Download and run the Update Tool; (3)Select and print the dataLED Notifications: Red-Yellow-Green LEDs and build-in speaker indicate the readiness status for smog check. This engine diagnostic tool can also help catch intermittent problems or confirm repairs during a drive cycle. Data review : Supports direct viewing and playback of the diagnosis process and storage of diagnosis records, avoiding re-diagnosis and saving more time I/M readiness for Smog Tests : Through the I/M Readiness function of this OBD2 scanner, you can check if the various emission-related parts or systems on the vehicle are operating properly and make sure the monitors are ready for a smog test. If not, fix it before the smog test to pass the test successfully and avoid fines. Retrieve Vehicle Information : This OBD2 code reader can easily get access to the car's ECU and retrieve its information, including VIN (Vehicle Identification Number), CID (Calibration Identification), and CVN (Calibration verification number) for accurate diagnoses. No need to look around for the VIN. Support Multi-Language : English, French, Russian, German, Italian, Spanish, Portuguese ..... Lifetime Free Update : no need to install drivers can be updated via USB, so you always have the latest car model data. User-friendly Design ： Hand-held size, clearly arranged K-ey pad, menu-driven navigation, hotk-eys and 2.8'' color screen together make the engine tool extremely easy to use. - DTC Lookup : Detailed definition of fault codes -Comptible with most 12V OBDII/EOBD/JOBD Car of the world , 【USA car most from 1996 -now ; Asian car most from 2004- now ; European car most from 2003 -now ; China car most from 2008- now 】 -Plug in and Play :this obd2 scanner support Plug and Play function.NO NEED BATTERY. plug into the OBD II port on your car and turn ignition on then read the car's vehicle information with the reader. - User-friendly design,3.8 inch color screen display,one-hand operation. -Lifetime free update :not like other basic scan tool can't do update, CR3008 PLUS obd2 scanner provides life-time FREE software update via USB -Supports Screenshot function,click the up and the down button at the same time 3s to get screenshot. -Enjoy Quick Emission Test : The oxygen sensor monitor allows the PCM to verify that the O2 sensors are properly calibrated and functioning without noticeable deterioration under normal engine operating conditions. ediag ya-101 obd2 scanner helps you get fully prepared for passing the smog check. -Enhanced OBDII-EVAP System test (MODE 8) :EVAP System test (Component Test) lets you initate a leak test for the vehicle’s EVAP system.After fixed a problem with the fuel system,you can verify your fix right away, without waiting a few days( or longer) for your car to run it automatically -Enhanced OBDII- On-Board Monitor Test MODE6 :Mode 06 keeps watch on how all of the sensors and other emission control components are functioning. it can reveal the inner workings of the OBD II system, and can tell you when a code is going to set even before it sets the code and turns on the Check Engine light. - Misfire Cylinder Test: Helps to clear the fault code of one abnormal cylinder .Helps to the PCM read the CKPS information and detect which cylinder has issue. What Engine data can be Read by CR3008 PLUS ? The LAUNCH CR3008 PLUS obd2 code scanner can read and erase codes which can also retrieve a wealth of information from the Engine Control Unit (ECU). The ECU is what triggers the Check Engine Light when there is a problem with your car. Parts might cause your check engine light on include: FUELSYS(fuel system status), LOAD_PCT(Calculated load value), ECT(Engine Coolant Temperature), SHRTFT(Short term fuel trim-bank), LONGFT(Long term fuel trim-bank), Engine RPM, VSS(Vehicle Speed Sensor), SPARKADV(Ignition timing advance for cylinder 1), IAT(Intake air temperature), MAF(Mass Air Flow), TP(Absolute Throttle Position), EQ_RATB1S1(Equivalence Ratio Bank 1, Sensor1), O2B1S1(Oxygen sensor output voltage), EVAP_PCT(Commanded Evaporative Purge), etc. Accurately read error codes for most 12V diesels & gas vehicles of Worldwide ,such as the SUVs, light trucks with standard Obd2. Graphing live vehicle sensors data allows you to focus on any suspicious data and trend. ✔ Product Features: Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs) Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors. Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data. I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing. Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display. View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer. On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems. Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability . Standard OBD2 Protocols: 1. SAE J1850 PWM (41. 6 Kbaud) 2. SAE J1850 VPW (10. 4 Kbaud) 3. ISO9141-2 (5 baud init. , 10. 4 Kbaud) 4. ISO14230-4 KWP (5 baud init. , 10. 4 Kbaud) 5. ISO14230-4 KWP (fast init. , 10. 4 Kbaud) 6. ISO15765-4 CAN (11 bit ID, 500 Kbaud) 7. ISO15765-4 CAN (29 bit ID, 500 Kbaud) 8. ISO15765-4 CAN (11 bit ID, 250 Kbaud) 9. ISO15765-4 CAN (29 bit ID, 250 Kbaud) CR3008 PLUS Suppport Car list: 1. America Car List: from 1996 years to now Fit for Chrysler ,Fit for Ford ,Fit for GM ,Fit for Jeep 2. Europe Car List: from 2002 years to now Fit for Alfa Romeo ,Fit for SAAB ,Fit for Acura ,Fit for Opel, Fit for Audi ,Fit for Seat ,Fit for Peugeot , Fit for Bentley ,Fit for Skoda ,Fit for Daewoo, Fit for Benz ,Fit for Daihatsu ,Fit for Land Rover Fit for BMW ,Fit for Vauxhall ,Fit for Citroen, Fit for Volvo ,Fit for Fiat ,Fit for VW ,Fit for Ford ,Fit for Jaguar 3. Asia Car List: (include Australia): from 2003 years to now Fit for KIA ,Fit for Isuzu ,Fit for Honda ,Fit for Mitsubishi, Fit for Hyundai ,Fit for Dacia ,Fit for Lexus ,Fit for Mazda Fit for Nissan ,Fit for Subaru ,Fit for Suzuki, Fit for Toyota 4. Chinese Car List : from 2008 years to now Fit for BYD, Fit for Chery, Fit for Geely, Fit for Great Wall, Fit for Karry ✔ Specifications: - Brand: LAUNCH - Model: CR3008 PLUS - Fitment: for all OBDII compliant cars - Color: black + orange - Display: 2.8" TFT color screen - OSD Language: English, Spanish, French, German, Polish, Portuguese, Hungarian, Dutch, Italy and Swedish - Power: 8-18 Volts powered by vehicle battery - Working Temperature: 0° to 60° - Storage Temperature: -20° to 70° - Product Dimension: 165*92*35mm/ 6.5*3.6*.1.5in - Package Size: 171*233*50mm/ 6.8*9.2*2in- Package Weight:360g / 13oz ✔ How to update CR3008 PLUS obd2 diagnostic code reader? (Not Necessary before utilization. ) 1. Visit LAUNCH website LAUNCHtech.com and then visit the Product page of CR3008 PLUS，select the Download tab to download the update application NTWonder. 2. Enable NTWonder and connect CR3008 PLUS to computer with USB cable in the package. 3. Click "Update online" or "Update offline" to start downloading and installing the latest version to your tool. Can only be updated on Windows system. No need for registration! 4. An Update Finished Message displays when the update is completed. ☒Package included: - 1 * OBDII Code Reader- 1 * English User Manual - 1 * USB Cable PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept PayPal payment. Please contact us if you need to use another method to pay. Payment should be made within 7 days after bidding ends. Otherwise an Unpaid Item case will be opened to you.Delivery details We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay. Items will be shipped within 1-2 business day when we received payment. Delivery time depends on destination. All of the shipping will have the tracking number and we will inform you the delivery information once the product is sent out. Terms of sales We are authorize distributor, our all items are 100% original and Our devices have warranty: 12 Months free repair for the devices. 3 Months for the accessories. Please contact us firstly when you need warranty service. In case an item arrives faulty, please contact us in 30 days and keep it unused. We will instruct you on how to return and get refund or replacement. If after 30 days, or the item has been used, we have the right to decline your claimAbout us We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 10 years. We are authorized first class distributor of LAUNCH,THINKCAR, EDIAG and KINGBOLEN etc., and more brands will be show in our store in near future. We have warehouse in US,UK,Hong Kong and China to ensure fast shipment and after-sale service. We have more than 100 employees devoting to customer satisfaction. Terms of tax: We are not responsible for buyer's local taxes, please consult your local Customs for tax details.Contact us Working Time: 9:00 am to 18:00 pm (GTM +8:00) from Monday to Friday If for some reason there is any issue with the purchase, please contact us before leaving feedback, and we will be glad to work with you to have it resolved.

Price: 43.99 USD

Location: Perth Amboy, New Jersey

End Time: 2024-08-16T16:48:21.000Z

Shipping Cost: 0 USD

Product Images

LAUNCH Creader CR3008 Fault Code Reader Scanner OBD2 EOBD Diagnostic Scan Tool

Item Specifics

Return shipping will be paid by: Seller

Returns Accepted: Returns Accepted

Item must be returned within: 60 Days

Refund will be given as: Money back or replacement (buyer's choice)

Return policy details:

Brand: LAUNCH

Manufacturer Part Number: MS300,MS309,THINKDIAG,CRP123,CRP123E,CRP129E,YA301

Supported System: Engine

OBD Interface: CAN, EOBD, OBDII

Connectivity: 16PIN OBD2 Port

Vehicle Type: Passenger Vehicle

Country/Region of Manufacture: China

Update: Lifetime Free Update

Features: Live date display, O2 Sensor Test, EVAP Test, On-board Monitor Test, I/M Readiness, Vehicle Information, Backlit Display, Check Engine Light Shut Off, Color Display, Erases Codes, Freeze Frame Displays, Internet Updateable, LCD Display, Multi-Language Interface, User Friendly

Advanced Features: Battery Test,Screen Capture,Lifetime Free Update

Type: Automotive Code Reader OBD2 Scanner

Accessories: Adapter Cable, Software Disc, USB Cable, User Guide

Model: LAUNCH CR3008 PLUS

Language: English, French, Russian, Spanish, German...etc

Screen: 2.8inch

Voltage: 12V

Operating Temperature: 0℃~ 50℃(32℉-122℉)

Environment Temperature: -20℃~70℃(-4℉-158℉)

Similar Model 1: AD310,AD410,NT301 ,NT201,NT624 Elite

Similar Model 2: AL419 , AL519 AL539 AL619 ML529

Warranty: Lifetime