LAUNCH X431 PAD VII PAD 7 X-Prog 3 Car Diagnostic Scanner K J2534 Programming

Description: LAUNCH X431 PAD VII PAD 7 X-Prog 3 Car Diagnostic Scanner K J2534 Programming 2023 Top-level Professional Diagnostic Tool -- LAUNCH X431 PAD VII (The most high-end in X-431 PAD Series) Free Gift:LAUNCH X-Prog 3 K Programmer 2 years free update The enterprise culture of LAUNCH: Innovation, Quality, Efficiency, Profession and Competition! LAUNCH is a global manufacturer focusing on innovation and excellence. LAUNCH diagnostic tools are designed with customer experience in mind, and that’s reflected in a wide range of features and p rice points, from basic code readers to full professional scanners. LAUNCH is preferred by many professional mechanics because of top-notch engineering. You know you’re getting the most up-to-date technology. This ultimate LAUNCH X431 automotive scanner PAD VII is a completely features-packed, offering everything technicians need to diagnose, research and repair vehicles in one solution. Power up from ready mode in only 5 seconds, and get fast one-touch access to scan, data analysis, guided functions, advanced diagnostics, with more vehicle coverage, expert tips and industry knowledge than any other LAUNCH X431 diagnostic tools on the market. Even the professionals have been left in awe at its performance. One is Enough! Quality Trumps Cost! All-Around Diagnostic Scanner Aimed at Professionals The features, the quality, the technical s-upport are all set to top-notch standards in this LAUNCH 2021-realesed ultimate X431 scan tool PAD VII. No particular disadvantage of this LAUNCH X431 tool could be found. It is made for the perfection with perfection. Widespread Coverage: 100000+ car models made in U.S., Asian and European with new protocols of CAN/CANFD/DoIP and new standards of J2534/D-PDU/RP1210; continually expanding. OE-level Premium Diagnostic Tool: AutoVIN & auto-search (2006+) • Features expandable design with 8 functional modules • Advanced E/CU programming + coding • Bi-directional scanner with active test • 60+ advanced functions • 35+ reset & relearn services • All accessible system diagnostics, and many more. Intelligent Diagnose: can easily get the VIN information of the vehicle, guide you to the vehicle information page without step-by-step selection, and display all diagnostic records of the vehicle. OE-Level All Accessible Systems Diagnostics: ✔Get access to all available electronic control units, to perform resets, module coding, bi-direction tests, and relearns. ✔Show the E/CU information such as unit type, version numbers, and other specifications. ✔Read & clear Diagnostic Trouble Codes; locate the trouble area in related system precisely. ✔Monitor the real-time Live Data Stream. 60+ Advanced Functions: VAG Guided Function, Online Technical Assistance, Online Coding, Component Matching, Power Balance, Online Parameterization, Online Calibration, Online Account Login Service, Cylinder Balance Test, Programmable Module Installation … to meet most of your maintenance needs. 35+ Reset & Relearn Services: Oil Reset, Injector Coding, Brake Reset, SAS Reset, BMS Service, ABS Bleeding, Throttle Matching … covering 99.9% commonly-used service functions. Topology Module Mapping: quick visual check of all systems communication status, and detect DTCs with simple one touch. OBDII Connector Pin Detection: pre-check OBDII connector pin is damaged or not for accurate diagnostics. SmartLink CVCI Box: used for SmartLink remote diagnosis, or as a pass-thru tool to connect with OEM software. Online Repair Resources: Operating Skills • DTC Help • Automotive Technology Handbook • Repair Cases • How-To Videos. Advanced Configuration & New Industrial Design: 2.0GHz 8-Core, Android 9.0, 13.3-inch 1920*1080 sunlight readable screen (Gorilla Glass), 8GB + 256GB (expandable), 4x4680mAh (20+ hours continuous use), 2.4Ghz/5Ghz Dual Stable Wi-Fi, Soft rubber corner protector, adjustable kickstand, more interfaces: USB Type C/USB Type-A/TF slot/SIM slot/HDMI/card. E/CU Programming & Coding. It’s Easier to Run. E/CU Programming This LAUNCH X431 diagnostic scanner can be used as a J2534 E/CU programming tool, thanks to its newly-developed CVCI box. It helps upgrade the OEM software and replace the existing software/firmware in the Electronic Control Units (E/CU), so to fix software-controlled drivability and emission issues. E/CU Coding Component Matching: Want to have the right direction while re-flashing the vehicle control modules after auto parts repair or replacement? Just follow the on-screen instructions to clear the original memories stored in E/CU, and write the adaptive data into specific components. LAUNCH X431 PAD VII is a commercial-grade scan tool will help you correctly build stable communication between new E/CU modules. Activate / Deactivate Functions: You can also use this scan tool to disable troublesome functions, and activate high-end car features as following: [ Deactivating the Start/Stop function | Seatbelt warning sounds | Mirrors automatically folding and unfolding | Closing the windows after closing the car door with the K | Flashing the brake lights during emergency braking | Activating/deactivating daytime running lights | Changing the brightness of daytime running lights | Flashing of the headlights when the alarm system is triggered | Displaying of the real speed via GPS signal | Displaying the amount of fuel consumption at a given speed | Changing the brightness of the dashboard | Displaying the optimal gear changing time in eco or sport mode | Select whether the display should be on the dashboard or head-up display | Incoming call display | And many more … ] **NOT universally compatible. Function menus may depend on vehicle’s make, model and year. Please feel free to c-ontact us for compatibility and tech-support! Revolutionary Topology Module Mapping + 60+ Advanced Maintenance Services + 35+ Reset & Relearn Services Revolutionary Topology Module Mapping It is the first application of topology module mapping in the field of automotive diagnostics. In terms of visual aspect, LAUNCH X431 PAD VII shows different health statuses in different colors and shows the structure of communication between modules. In the aspect of ease of use, it enables you to press the system module to access the system and display the relevant DTCs. 60+ Advanced Maintenance Services: VAG Guided Functions: Skip the SE/CUrity Access Code & Channel Number to perform matching, calibration, and basic settings for VW / Audi / Skoda / Seat; **NO extra costs. Component Matching: Rematch E/CU (control module unit) after the replacement for VW / Audi / Skoda / Seat / BMW / Chrysler / GM / Ford / Opel / Mazda / Fiat / Honda / Nissan / Hyundai / Kia / Subaru etc. Online Parameterization: Reset all adaptive data in target systems after E/CU module replacement; compatible with VW / Audi / Skoda / Seat. Online Calibration: For some car systems’ calibration; compatible with VW / Audi / Skoda / Seat. Online Account Login Service: Access to the login codes for coding, matching, and basic settings of all available systems. Programmable Module Installation (PMI): Ensure the correct software/calibration and configuration data are loaded onto the new module after replacement for Ford / Mazda. Power Balance: Identify the less productive cylinder for Chrysler / GM / Ford. Personalization: Compatible with BMW / Porsche / Toyota / Subaru. And many more are coming soon. 35+ Reset & Relearn Services Cover the majority of makes and models worldwide up to 2018/2019/2020/2021 for Oil Reset, Injector Coding, Brake Reset, SAS Reset, BMS Service, ABS Bleeding, Throttle Matching, TPMS Reset, DPF Reg, Gear Learning, AFS Reset, EGR Adaption, Gearbox, Sunroof, SUS Reset, Windows Calibration, Seats Calibration, Language Change, A/F Reset, Coolant Bleed, Transport Mode, Adblue Reset, NOx Sensor Reset NOx, Stop/Start Reset, Headlamp Fitting, Seat Matching, Door & Window Initialization Study, Air Suspension Matching, Multimedia Video Reset, Cluster Reset, Immobilizer Service, Tire Change, and more. FCA SE/CUre Gateway LAUNCH X431 PAD VII automotive diagnostic scanner provides a trustworthy authority for technicians, car dealers, automotive engineers, and service shops to undo the SGW and perform all the necessary repair procedures. Active Test / Bidirectional Control LAUNCH X431 PAD VII performs the active test, which bypasses the onboard control systems to send commands to modules to perform specific tests. By monitoring their responses, you can precisely locate the faults, and shorten the troubleshooting time without tearing the vehicle apart. It can: Rolling up / down a window; Turning the fuel pump on and off; Cycling the a/c clutch on and off; Helping with an emissions leak test; ... Pin Detection This module allows you to detect the voltage of the vehicle OBD II diagnostic socket pins and the supported protocol types to help technicians judge the OBD II diagnostic interface. Note: Before performing this function, please make sure that SmartLink C is properly connected to the vehicle’s DLC port. Wide Vehicle Coverage The newly upgraded LAUNCH X431 PAD VII has also been improved in terms of vehicle coverage. The vehicle coverage upgrade is not limited to a particular country but refers to globally broad compatibility for commercial and passenger vehicles. It is compatible with ABARTH, ACURA, AUDI, ASTON MARTIN, BAIC, BENZ, BINGLEY, BMW, BRILLIANCE, BUGATTI, BUICK, BYD, CADILLAC, CHANG'AN, CHANGCHENG, CHANGHE, CHERY, CHEVROLET, CHRYSLER, CITROEN, CMC, DACIA, DAEWOO, DAIHATSU, DODGE, FAW, FERRARI, FIAT, FIAT (BRAZIL), FUKANG, FORD, FORD (AUSTRALIA / EUROPEAN), FOTON, GAZ, GM, GM (BRAZIL), GMSA, GONOW, HAFEI, HAIMA, HONDA, HORTON, HYUNDAI, INFINITI, INDIA FORCE, ISUZU, ISUZU(TL), IVECO, IZH, JAC, JAGUAR, JEEP, JIANGLING, KIA, KOWLOON, LANCIA, LAND ROVER, LEXUS, LIFAN, LINCOLN, LUXGEN, MAYBACH, MAHINDRA, MARTHA, MARUTI, MAZDA, MINI, MITSUBISHI, MVM, NISSAN, OPEL, PAZ, PERODUA, PEUGEOT, PORSCHE, PROTON, RENAULT, ROLLS-ROYCE, ROMEO, SAAB, SAIC, SAIC AND MG, SAIPA, SAMSUNG, SEAT, SEAZ, SGM, SGMW, SKODA, SMART, SSANGYONG, SUBARU, SUZUKI, TATA, TIANJIN, TOYOTA, TRANSPORTER&V-CLASS, UAZ, VAUXHALL, VAZ, VINFAST, VISUAL, VOLVO, VW, WEILI, XIAMEN, XIAOKANG, XINKAI, ZAZ, ZHONGSHUN, ZHONGXING, ZOTYE Supports Extended Function Modules: VSP-600 VideoScope: for up-close visual inspections in confined areas. X-PROG & X-PROG3 Immobilizer: for K programming & IMMO service. S2-2 SensorBox: diagnose and simulate vehicle sensor faults quickly. O2-1 ScopeBox, Oscilloscope: quickly acquire the circuit signal, and slowly display the waveform for easier analysis. X-431 Wi-Fi Printer: print out diagnostic data & reports. X-431 TSGUN: activate all sensors, relearn & program LAUNCH sensors. BTS360 Bluetooth Battery Tester: get a thorough test of the vehicle battery. **Need extra costs to buy these function modules. LAUNCH Tech. is the original manufacturer of LAUNCH diagnostic scanners.LAUNCH Tech. USA is one of the dealers located in America.All of our a fter-sale services are direct from the LAUNCH Tech., the genuine manufacturer, including 60 days unconditional return & 100% original replacement policy, and 5 years product quality backup. PaymentDelivery detailsTerms of salesAbout usContact us Payment 1.We accept Credit cards、Debit card、Apple Pay、Google Pay etc.payment. 2.Please contact us if you need to use another method to pay. 3.Payment should be made within 4 days after bidding ends. 4.Otherwise an Unpaid Item case will be opened to you. 5.We are not responsible for buyers’ local taxes. 6.Please include your special requests in eBay note if there is any. 7.We reserve the final right of selling Delivery details Shipping Order will be shipped within 1 business day after payment confirmed. We have warehouse in USA，UK，HongKong，Australia，Russian，Germany and China warehouse. From our US/UK/RU/DE/AU warehouse via USPS UPS or DHL eCommerce shipping Delivery time varies from 2 to 6 business days. From our China warehouse via UPS DHL or Fedex Delivery time varies from 5-12 business days. We will ship according to your payment address. Please make sure it is correct and include phone number for delivery. If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem. Please include your special requests in eBay note if there is any. Terms of sales We are authorize distributor, our all items are 100% original and Our devices have warranty,12 months free repair for the devices.3 months for the accessories. Please contact us firstly when you need warranty service. In case an item arrives faulty, please contact us in 30 days and keep it unused. We will instruct you on how to return and get refund or replacement. If after 30 days, or the item has been used, we have the right to decline your claim. Items should be returned on buyers' cost for repair or replacement. About us Who We Are?We are specialized dealer of On-Board Diagnostic tools and automotive electronicsfor more than 10 years.We are authorized first class distributor of Launch, Autel, Ausdom, Caska and Ehang brands,and more brands will be show in our store in near future.What Do We Have?We have office and warehouse in Australia and US to ensure fast shipment and after-sale service.We have more than 50 employees devoting to customer satisfaction.Terms of tax:We are not responsible for buyer's local taxes, please consult your local Customs for tax details. Contact us Our customer-oriented service strives for positive feedbacks with all 5 star selling ratings.Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case.We will reply in 24 business hours.Business time: GMT8 (9:00-18:00) from Monday to Friday.

Price: 2799 USD

Location: Perth Amboy, New Jersey

End Time: 2024-12-06T10:22:14.000Z

Shipping Cost: 0 USD

Product Images

LAUNCH X431 PAD VII PAD 7 X-Prog 3 Car Diagnostic Scanner K J2534 Programming

Item Specifics

Return shipping will be paid by: Seller

Returns Accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Return policy details:

Brand: LAUNCH

Model: LAUNCH X-431 PAD VII + X-PROG 3

Type: High-end Diagnostic Tool Code Reader Scanner

Manufacturer Part Number: X431 PRO 5 V+ PAD V PAD 7 PRO3S MS919 MS909 Ultra Elite II

OBD Interface: CAN, EOBD, OBD, OBDII

Connectivity: Bluetooth/USB/WIFI

Supported System: ABS, DPF, EPB, SAS, SRS, TPMS, Engine, Transmission, Airbags, Immobilizer, K Coding

Vehicle Type: Passenger Vehicle

Features: Backlit Display, Built-In Battery, Check Engine Light Shut Off, Color Display, Erases Codes, Freeze Frame Displays, Internet Updateable, LCD Display, Multi-Language Interface, User Friendly

Accessories: Adapter Cable, Carrying Case, Memory Card, USB Cable, User Guide

Warranty: 5 Year

Update: 🥇2 Years Free Update

CPU: 2.0GHz Octa-core

Operating System: Android™ 9.0

Memory: 8GB

Storage: 256GB

Display: 13.3 inch

Resolution: 1920*1080

Front camera: 8MB Front

Rear camera: 13MP Rear

Battery: 71140mWh