LEA Professional CS702-ADSP 2 Ch Smart Amplifier, 700W per channel @ 4/8 Ohms

Description: LEA Professional Connect Series 702-ADSP is a 2 Channel Smart Amplifier, 700W per channel @ 4/8 Ohms and 70/100V w/ Advanced DSP, FIR Crossovers, Wi-Fi or FAST Ethernet Connectivity, IoT-Enabled, 1 RU. Part of LEA Professional’s Internet of Things (IoT) enabled amplifiers, the CS702 is a Advanced DSP 700-watt per channel, 2-channel power amp that can output at HiZ (70V or 100V) or LoZ selectable by channel. The amp has 3 ways to connect, use the amp’s built in WiFi access point, connect to the venue’s WiFi, or use the FAST Ethernet to connect to any local area network via the Cat5 or Cat6 cable.FeaturesWeb Browser based UI that works on any device with no software to downloadProprietary Smart Power Bridge allows user to bridge a channel to achieve double the power to that channel without sacrificing and amplifier channelDirect LoZ and HiZ (70V or 100V) selectable per channel3 Way to connect: Built-in WiFi access point, Connects to existing WiFi network, Local area network Ethernet connectionUniversal switch mode power supply with PFC. Operates from 100VAC to 24VAC +/- 15%96kHz Analog Devices DSP with input routing, multiple 48dB/octave crossover filters, 8 parametric EQ filters, user configurable speaker limiters, and real-time monitoringFully routable analog inputsExternal I/O port for remote on/off and fault monitoringHigh efficiency Class D output stage for low AC current drawSpecificationsOutput Power:2 x 350W RMS per channel @ 4â¦, 8â¦, 70V, 100V350W @ 2â¦Input:2 balanced analog inputs with user-selectable 26dB and 34dB input sensitivityTHD+N:0.1% (20Hz - 20kHz)Frequency Response:±0.5dB @ 4â¦, 8â¦, 70V, 100V-2.5dB @ 20kHz @ 2â¦Signal-to-Noise Ratio:105dB (20Hz - 20kHz, referenced to 8â¦)Crosstalk:70dB (20Hz - 20kHz)Latency:3.2ms DSP latencyLoad Impedance:LowZ down to 2â¦, 70V direct, and 100V direct per channelAmplifier Class:Class D with Smart Power Bridge for bridged output without losing an amplifier channelDC Offset:±3mVDSP:Architecture: Analog Devices Sharc 96kHz DSP processor, 32-bit core with sample rate convertersInput Matrix: Fully routable, with primary and secondary input priorityCrossovers: Up to 48dB/octave IIR filters (Linkwitz-Riley, Butterworth, Bessel); FIR filters (24dB/oct & 48dB/oct Linkwitz-Riley, Linear Phase Brickwell, up to 2048 taps per channel @ 96kHz)Parametric EQ: 8 bands per channelOutput Delay: 4 seconds per channelProtection: DC, VHF, AC mains, over-temp, current limiter, fan fault detectionLimiting: Peak and RMS voltageLoad Monitoring: Real-time monitoring and pilot tone detection from internal or external sourcesControl, Monitoring, and Network:Connectivity: Wi-Fi or 100MB Ethernet with PoE, built-in Wi-Fi access point (IEEE 802.11 b/g/n, WPA, WPA2, WEP)User Interface: Web browser, 3rd party API, LEA Cloud, or SharkWareOperating Systems: WebUI (Mac, iOS, PC, Android, Linux); SharkWare (Mac, PC)Event Reporting: Downloadable and viewable event and fault log, with enhanced error monitoring via PoEExternal I/O: Input for remote on/off, output for amplifier healthCloud IoT: AWS-based via LEA Professional CloudPower:AC Mains: 100-240VAC ±15%, 50Hz/60HzOperating Temperature: 0°C to 60°CStorage Temperature: -20°C to 90°CPower Supply: Universal switch-modeEN54-16 Output Power:304W @ 9.6â¦ (40°C ambient for 1 minute)Smart Power Bridge: 469W @ 9.6â¦ (40°C ambient for 1 minute)Safety Approvals:UL, CSA, CE, ETL, FCC, CCC, KETI, NOM, ROHS, PSE, EN54-16Physical Specifications:Dimensions (L x W x H):Product: 14.25" x 19" x 1U (362mm x 482mm x 1U)Shipping: 20" x 22.75" x 3.75" (508mm x 578mm x 95.25mm)Weight:Product: 10lbs / 3.4kgShipping: 18.7lbs / 8.5kgCooling:Front-to-rear variable fan speedFan noise: 50dB @ 1m (idle), 57dB @ 50%, 63dB @ full speedConnectors:Analog input: 3-pin Amphenol AnytekOutput: 2-pin Amphenol Anytek

Price: 2694 USD

Location: Verona, Wisconsin

End Time: 2024-12-14T20:18:07.000Z

Shipping Cost: 0 USD