LMR 100 Ultraflex Times Microwave coaxial 50 Ohm Low Loss Cable 10-40metres

Description: LMR-100A-UFLMR-100A-UF cable, Manufactured by Times Microwave Systems is designed for low loss general-purpose applications. The LMR-100A-UF was designed as a much more flexible alternative to the LMR-100A cable. This is achieved by employing a stranded centre conductor and a TPE rubber outer jacket.The LMR range is recognised globally as the industry standard ultra low loss, flexible, low cost, lightweight, DC – 6GHz coaxial cable solution for many RF applications. This is also backed up by the best warranty and technical support in the business. How is the LMR-100A-UF low loss figures achieved?This is achieved due to the cable construction specifications. The centre conductor uses a high conductivity, Stranded bare copper centre conductor material. The dielectric is nitrogen injected, foamed, closed cell, Polyethylene which helps achieve 66% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor, which is chemically bonded on to it. Due to the cable construction, The attenuation is significantly lower as compared to single shielded coaxial cables.Outer JacketThe LMR-100A-UF comes with a black TPE Jacket.Frequency Operating BandLMR-100A-UF is designed to operate excellent from DC – 6GHz. For any frequency band at VHF and above LMR is the obvious choice. Applications LMR-100A-UF Flexible Low Loss Communications Coaxial Cable is ideal for:Drop-in Replacement for RG-316/RG-174 (uses standard connectors)Jumper Assemblies in Wireless Communications SystemsShort Antenna Feeder runsWLLGPSLMRWLANWISPWiMAXSCADA3G or 4G repeatersRadio antennas or receiversVSAT ApplicationsTVROAttenuation dB figures per 100m30 MHz : 12.9 dB50 MHz : 16.7 dB150 MHz : 29.4 dB220 MHz : 35.8 dB450 MHz : 51.9 dB900 MHz : 74.9 dB1500 MHz : 98.7 dB1800 MHz: 109.0 dB2000 MHz: 115.5 dB2500 MHz : 130.6 dB5800 MHz: 210.3 dBTemperature range: -40⁰C – +85⁰C Inner Conductor: Stranded BC (0.46mm)Dielectric: Foam PE (1.52mm)Outer conductor: Aluminium tape (1.65mm)Overall Braid: Tinned copper (2.11mm)Jacket: Black PVC (2.79mm)Mechanical SpecificationsBend Radius: installation 6.4mmBend Radius: repeated 25.4mmBending Moment: 0.014NmWeight lb/ft 0.014Kg/MTensile Strength 6.8KgFlat Plate Crush: 0.18Kg/mmLMR® is a registered trademark of Times Microwave Systems LMR-100A-UF cable, Manufactured by Times Microwave Systems is designed for low loss general-purpose applications. The LMR-100A-UF was designed as a much more flexible alternative to the LMR-100A cable. This is achieved by employing a stranded centre conductor and a TPE rubber outer jacket. The LMR range is recognised globally as the industry standard ultra low loss, flexible, low cost, lightweight, DC – 6GHz coaxial cable solution for many RF applications. This is also backed up by the best warranty and technical support in the business. This is achieved due to the cable construction specifications. The centre conductor uses a high conductivity, Stranded bare copper centre conductor material. The dielectric is nitrogen injected, foamed, closed cell, Polyethylene which helps achieve 66% VelLMR-100A-UF cable, Manufactured by Times Microwave Systems is designed for low loss general-purpose applications. The LMR-100A-UF was designed as a much more flexible alternative to the LMR-100A cable. This is achieved by employing a stranded centre conductor and a TPE rubber outer jacket. The LMR range is recognised globally as the industry standard ultra low loss, flexible, low cost, lightweight, DC – 6GHz coaxial cable solution for many RF applications. This is also backed up by the best warranty and technical support in the business. This is achieved due to the cable construction specifications. The centre conductor uses a high conductivity, Stranded bare copper centre conductor material. The dielectric is nitrogen injected, foamed, closed cell, Polyethylene which helps achieve 66% Vel

Price: 41.86 USD

Location: Kirkcaldy

End Time: 2024-08-17T12:18:01.000Z

Shipping Cost: 49.2 USD