Loaded Mathews V3/31 Bow Package- Many DL Available- Realtree Edge Camo

Description: CLEAR ARCHERY INC. Proudly serving your archery needs online for over two decades!! Unfortunately, I am no longer able to place a phone number here in my listings as per eBay's policies so that we can discuss your purchases by phone. This drastically cuts into my ability to provide the best customer service possible, as I have done for so long here and through my own online storefront. This though is the new eBay policy, and there is nothing that I am able to do about this. I will still though do everything that I can to assure that your receive the bow package you are most interested in, set up in a way that best suits you, while providing the best customer service possible despite the limitations eBay has chosen to place on everyone. LoadedRight HandedMathews V3 in 31 inchBow Packagein Realtree EdgeCamo Finish This bow was used through two archery seasons and has been well cared for in that time. I have only the bows you see listed to offer, no others.I will work with you on putting together a package that is of most interest to you, but I am not interested in selling bare bow only. Please see the photos as they speak for themselves. Bow Specifics: - approximately 31" axle to axle- 6" brace height- up to 342 fps IBO- 4.5 lbs (bare bow only) Here are the specifics -Right Handed -Currently the bow is set up with 28 inch, 85% letoff, 70 pound modules (actually topping out at just over 73 pounds on my scale). The draw length and draw weight can be changed by changing the mods on the bow. This bow can be set up anywhere from 26 through 30.5 inches in draw length in either 80% or 85% when the correct draw modules are installed. Those modules are also available in 60, 65, 70 or 75 pound max draw weights.Each of those sets adjust around 10 pounds below the stated weight (so the 60 pound mods will drop to 48 pounds safely, the 65 to 53 pounds safely, the 70 to 58 pounds safely, and the 75 to 63 pounds safely). I have modules in 85% in stock to set this bow at the following: In 75 pound: 30.5, 30, 29.5, 29, 28.5, 28, 27.5, 27 In 70 pound: 30.5, 30, 29.5, 29, 28.5, 28, 27.5, 27, 26.5, 26 In 65 pound: 30.5, 30, 29.5, 29, 28.5, 28, 27.5, 27, 26.5, 26 In 60 pound: 30.5, 30, 29.5, 29, 28.5, 28, 27.5, 27, 26.5, 26 I have just a few in 80%. Please inquire about what may be in stock on those prior to any purchase to confirm. ONLY ONE set of the stated in stock draw modules will be installed on the bow and included with the purchase at this price. If you do not see the module set you would prefer listed, I can order others in. This will though take some time, so if sold through the Buy It Now option here one of the module sets listed above will be installed and included. -The limbs are in Factory Realtree Edge Camo finish. The limbs will differ in weight depending upon the SwitchWeight module set that is installed.Peak weight can be turned down in the traditional way using the limb bolts, but other modules will also achieve this while keeping the bow in time and tune more effectively. -The riser of the bow is in Factory Realtree Edge Camo finish. -The new Engage grip from Mathews is a fantastic improvement over prior models from Mathews. -Peep sight is installed, aligned, served into place and is ready to shoot. -String loop is installed and ready to shoot. -The string set is a the original factory set of Zebra Trophy from Mathews. They are in nice used condition, and I would rate them an 8.5 of 10. -The sight is a Brand New Fuse Cybex XT 5 pin micro adjust in Realtree Camo and black finish. Very nice sight. 5 Precision steel pins, all in .019 size. Micro click adjustment knobs for both windage and elevation allow for easy and precise adjustments. The sight has second and third axis adjustability. There are 8 interchangeable colored Stealth Bands that are included (the green is currently installed as can be seen in the photos). There is also a rheostat light added to the sight. The light mounts in the housing of the sight, so that it shines only on the wrapped fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. I have some other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well. -The stabilizer is a Brand New Fuse Intrepid 6 inch in Realtree Camo and black finish. This is a nice stabilizer in both look and function. As can be seen, it has Shock-Rod technology from Hoyt. These Shock Rods are in two modular weights that can be moved forward or back on the stabilizer to better weight the stabilizer to your shooting preferences. Total current weight of the stabilizer is approximately 5 ounces, though you could change this by removing one or both of the modular weights again to better fit your shooting preferences. I have some other stabilizers as well if you are looking for something different. If you would prefer any other stabilizer than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well. -The rest is a Mathews model QAD Ultra Pro Series series drop away (Mathews Ultra, not an integrated model) in camo finish. This rest is made in incorporation of both the Mathews and QAD companies to work with Mathews bows. It carries the Mathews logo as well as a Mathews Harmonic Damper covering the mounting bolt area of the rest. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot. All Pro series rests also carry a LifeTime Warranty through Mathews and a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot. MSRP on the rest when new is $180. I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want. -12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes. Again, these are 100 percent brand new, unshot, uncut arrows. I have several other arrow options available as well. Each option will be factory fletched in different colors. * If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.The arrows I have in stock and pricing difference is as follows: *GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing. *Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.Arrow upgrades available are as follows: *Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow. *Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows. *Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows. *Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows. *GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows. *GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen--- -Also included is a new Apex Gear Gamechanger 5 arrow quick detaching quiver in camo and black. This is a one piece quick detaching quiver that mounts using a bracket on the back of the sight. The locking latch can be closed to secure the quiver in place should you choose to shoot with the quiver on the bow. It is easily and quietly removed by lifting the latch and sliding the quiver from the mounting bracket. MSRP on this quiver was $100. ****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here****** I am not interested in selling bare bow only. SHIPPING If you are within the Continental US, the bow will be shipped by FedEx, insured for the full purchase amount, with signature confirmation upon delivery and a tracking number sent to you once it is on its way. If you are in Alaska or Hawaii, the bow must be shipped by USPS mail (unless you wish to pay the additional charges that FedEx will place on any shipment- they are usually quite high). Shipping is to the United States only. I do not wish to sell or ship outside of the United States. Thank you,Tom Clear Clear Archery Inc.

Price: 1499.99 USD

Location: Erie, Pennsylvania

End Time: 2024-02-17T12:20:14.000Z

Shipping Cost: 50 USD