LUXMAN PD441 turntable floating motor with new dust cover/SME compatible base

Description: Product descriptionA player system that uses a floating motor.The PD441 has the same design as the PD444, and is compact in size by being compatible with one standard tonearm.The drive unit uses a quartz lock type direct drive system.The quartz lock system suppresses disturbance load fluctuations in the DC range and below 1Hz, and also suppresses instantaneous drift and temperature drift.Additionally, in order to suppress disturbance load fluctuations in the relatively high frequency band of 5Hz to 10Hz or higher, which is beyond the reach of quartz control, it is necessary to utilize the flywheel effect of the turntable, but bearing life becomes an issue. To address this issue, we have adopted Lux's unique load-free spindle system. This method uses the magnetic force inside the motor to attract the rotor upward, canceling out the weight of the turntable. This reduces the load on the turntable on the bearing to about 1/5.The chassis uses a sandwich structure in which a high-density chipboard is sandwiched between two 3.2 mm steel plates, achieving a structure that is highly rigid and difficult to resonate.The insulator uses a low fo two-stage braking insulator.This insulator is effective against both small amplitude vibrations that cause howling and large amplitude vibrations that tend to occur during player operation.A sliding arm base is used for the arm base, allowing for easy arm replacement and overhang adjustment.The arm base is a combination of a zinc die-cast base and an aluminum extrusion panel, and has a structure that slides on the arm base rail, and is fixed by operating a lever.Equipped with a platter mat to improve adhesion to records and dump turntables.A dust cover made of 4mm thick acrylic plates is used.●Main specificationsDrive method Direct drive methodDrive motor: Crystal controlled flat type brushless load-free spindle DC servo motorTurntable 30cm aluminum die-cast, 2.5kgRotation speed 33・1/3rpm, 45rpmRotation speed accuracy within 0.002%Temperature characteristics 0.00003/℃Wow and flutter 0.025%(WRMS)SN ratio 63dB or more (JIS)Attached device Lock indicator: 33 1/3 rpm (blue), 45 rpm (red)Insulator: Low fo 2 stage braking type with spring, rubber and grease, height adjustable (10mm)Arm base: one-touch detachable, die-cast 1 unit, short arm onlyAcrylic cover: 4mm thick plate laminated semi-fleece top with hinges (weight 1.6kg)Power supply AC100V, 50Hz/60HzPower consumption 16W (always)External dimensions Width 474x Height 160x Depth 392mmWeight 17kg★The condition of the product is that there are no noticeable scratches or stains. - This is a new item. - There is fading in the lettering and scratches on the platter installation surface. Other buttons, arm base, and chassis are in good condition with no noticeable damage and are shiny. ・The platter is also shiny with no major scratches, just some scratches/dullness. ・The rubber mat is also soft with no warping or hardening. - No noticeable damage found. ・All four insulators are functioning, and the hinges remain open without damage. This is a used item that has been around for a number of years. Please be aware of the scratches/dullness/feeling due to age/use before bidding.For "remote delivery areas", additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as "gifts". -US and International government regulations prohibit such behavior.

Price: 1231 USD

Location: Yamagata-ken, Miya-waki,

End Time: 2024-11-27T02:10:06.000Z

Shipping Cost: 0 USD