McIntosh C32 Vintage Preamp w/Phono and EQ

Description: McIntosh C32 Vintage Preamp w/Phono and EQ - SkyFi Serviced General:The C32 is a full featured preamp with just about every function you could want for a complete system.If you have vintage speakers or want to get a bit more out of your modern speakers, then you'll likely appreciate the front mounted 5-band EQ built into this preamp.The built-in phono section lets you connect your turntable without the need for additional gear.This nice example received a service at our shop including new an official McIntosh replacement front glass faceplate. It's now working and sounding wonderful. SkyFi Cosmetic Notes:This preamp came to us with broken glass. The was replaced with a reproduction piece sourced directly from the McIntosh factory. The new glass propagates light differently than original glass so the brightness and color of the indicator lamps and lettering may appear muted or more dim than an original 1970's glass faceplate. The jacks on the rear panel have lost most of their plating, and the top cover shows some wear. Overall good condition for its age.SkyFi Technical Notes:This preamp was serviced in-house at SkyFi Audio. In additional to our regular maintenance, we installed select replacement ribbon cables and replaced select electrolytic capacitors and relays as needed.Brand Background:McIntosh Laboratory is an American manufacturer of handcrafted high-end audio equipment based in Binghamton, New York. The company was founded in 1949 by Frank McIntosh. The company designs and produces audio amplifiers, stereo tuners and other consumer electronics products.Ownership:Single OwnerConnections:RCA inputs and Outputs, Switched AC outletsGeneral Sound:Smooth, uncolored, undistorted natural and cleanCosmetic Condition:6/10 = Fair. Three to four minor scratches, or one major scratch.Working Condition:Working perfectly and tested in our lab and listening room.Included:Just the UnitPacking:Will be packed using our highly developed in-house process and custom packing materials.Original MSRP:$1,659.00 (1977 ~ 1982)Specs:Frequency response: 20 Hz to 20 kHzTotal harmonic distortion: 0.05%Gain: 62 dB (MM), 20 dB (line)Input sensitivity: 2mV (MM), 250mV (line)Signal to noise ratio: 90 dB (MM), 100 dB (line)Output: 250mV (line), 2.5V (Pre out)Dimensions:16" x 5.4" x 13" (406 x 138 x 330mm)Weight:26 lbs.Approximate Age:1977Testing Process:We start with a visual inspection of all internal components to make sure that there are no signs of heat stress or damage. Capacitors are checked for telltale signs of predictive failure including bulging, shrunken wrappers, or physical leakage. We also inspect the PCBs for discoloration from resistors or transistors that may have been running hot. On vintage units we often spot check select capacitors for value and ESR.When we first power on a preamplifier we connect its RCA output to a Sencore PA81 Power Analyzer which simulates real world loading conditions and gives us an oscilloscope interface.The first order of business is checking that the volume control works smoothly throughout its entire range with acceptable channel balance. This is accomplished by feeding a 1 KHz sine wave into one of the preamp’s line level inputs while monitoring the preamp’s output on an oscilloscope.We then switch to a 1 KHz square wave to test the tone controls, loudness function, and filters where applicable. During this step we are watching for equal alteration of the test signal by both channels. This also helps us identify dirty controls that will need treatment.Once the basic line stage functions are verified, we test each input individually. This is especially important for devices that use relays to select their sources. If the preamp is equipped with a phono stage we test that as well. We use an inverse RIAA filter which allows us to feed a reference test signal into the phono input with the proper RIAA equalization and level. A square wave or sine sweep is used to verify that the device’s phono stage is faithfully reproducing the RIAA curve. If the preamp under test has balanced inputs and/or outputs these are tested as well.We finish up our bench testing with a listening test with our bench amplifier and reference speakers. During this test we check for hum or hiss that may not have shown up in earlier testing. We also check that all of the tone controls and filters perform as expected.If the preamplifier has remote control functions these are also tested. Preamps with tube circuits or complicated power supply topologies are connected at our long term test rig for extended stress testing under real world conditions. ----------------------------------------------------------------------- *Please note we are not a repair shop and only restore what we own. ---------- SkyFi Audio - Curators of Vintage Audio Gear SkyFi Audio is a small startup business specializing in the purchase, reconditioning, and reselling of high end audio equipment. We only buy equipment that we admire and are passionate about. ---------- PURCHASING GUIDELINES: 1) This item will be professionally packaged and insured for safe transit to your home unless you opt for local pickup from our shop. All local pickup items are only wrapped in industrial strength clear stretch wrap if the original manufacturer packaging is unavailable. Local pickup is available in Glen Rock, NJ, 07452, just a half hour drive from Midtown Manhattan, with convenient parking near our building. If we don’t have the original packaging, we use heavy-duty double-ply corrugated boxes with custom made to your item SealedAir Instapak expanding foam custom inserts. In many cases this has proven to be better than the original packaging! We also use high quality fiber reinforced tape to seal our packages. Lightweight items will be bubble wrapped and shipped in a high-quality box. 2) We will not review or accept any offers that do not go through the official eBay system. We have too many items for sale and it’s nearly impossible to keep track of offers outside of the official system. Please do not message, email, or text any offers. 3) Please ensure your shipping address is correct within eBay as we will ONLY ship to the eBay/PayPal Confirmed Shipping Address. No exceptions. 4) eBay may charge and collect sales tax to your state/jurisdiction which we have no control over. eBay v1.91BH McIntosh C32 Vintage Preamp w/Phono and EQ - SkyFi Serviced General: The C32 is a full featured preamp with just about every function you could want for a complete system. If you have vintage speakers or want to get a bit more out of your modern speakers, then you'll likely appreciate the front mounted 5-band EQ built into this preamp. The built-in phono section lets you connect your turntable without the need for additional gear. This nice example received a service at our shop including new an official McIntosh replacement front glass faceplate. It's now working and sounding wonderful. SkyFi Cosmetic Notes: This preamp came to us with broken glass. The was replaced with a reproduction piece sourced directly from the McIntosh factory. The new glass propagates light differently than original glass so the brightness and color of the indicator lamps and lettering may appear muted or more dim than an original 1970's glass faceplate. The jacks on the rear panel have lost most of their plating, and the top cover shows some wear. Overall good condition for its age. SkyFi Technical Notes: This preamp was serviced in-house at SkyFi Audio. In additional to our regular maintenance, we installed select replacement ribbon cables and replaced select electrolytic capacitors and relays as needed. Brand Background: McIntosh Laboratory is an American manufacturer of handcrafted high-end audio equipment based in Binghamton, New York. The company was founded in 1949 by Frank McIntosh. The company designs and produces audio amplifiers, stereo tuners and other consumer electronics products. Ownership: Single Owner Connections: RCA inputs and Outputs, Switched AC outlets General Sound: Smooth, uncolored, undistorted natural and clean Cosmetic Condition: 6/10 = Fair. Three to four minor scratches, or one major scratch. Working Condition: Working perfectly and tested in our lab and listening room. Included: Just the Unit Packing: Will be packed using our highly developed in-house process and custom packing materials. Original MSRP: $1,659.00 (1977 ~ 1982) Specs: Frequency response: 20 Hz to 20 kHz Total harmonic distortion: 0.05% Gain: 62 dB (MM), 20 dB (line) Input sensitivity: 2mV (MM), 250mV (line) Signal to noise ratio: 90 dB (MM), 100 dB (line) Output: 250mV (line), 2.5V (Pre out) Dimensions: 16" x 5.4" x 13" (406 x 138 x 330mm) Weight: 26 lbs. Approximate Age: 1977 Testing Process: We start with a visual inspection of all internal components to make sure that there are no signs of heat stress or damage. Capacitors are checked for telltale signs of predictive failure including bulging, shrunken wrappers, or physical leakage. We also inspect the PCBs for discoloration from resistors or transistors that may have been running hot. On vintage units we often spot check select capacitors for value and ESR. When we first power on a preamplifier we connect its RCA output to a Sencore PA81 Power Analyzer which simulates real world loading conditions and gives us an oscilloscope interface. The first order of business is checking that the volume control works smoothly throughout its entire range with acceptable channel balance. This is accomplished by feeding a 1 KHz sine wave into one of the preamp’s line level inputs while monitoring the preamp’s output on an oscilloscope. We then switch to a 1 KHz square wave to test the tone controls, loudness function, and filters where applicable. During this step we are watching for equal alteration of the test signal by both channels. This also helps us identify dirty controls that will need treatment. Once the basic line stage functions are verified, we test each input individually. This is especially important for devices that use relays to select their sources. If the preamp is equipped with a phono stage we test that as well. We use an inverse RIAA filter which allows us to feed a reference test signal into the phono input with the proper RIAA equalization and level. A square wave or sine sweep is uséd to verify that the device’s phono stage is faithfully reproducing the RIAA curve. If the preamp under test has balanced inputs and/or outputs these are tested as well. We finish up our bench testing with a listening test with our bench amplifier and reference speakers. During this test we check for hum or hiss that may not have shown up in earlier testing. We also check that all of the tone controls and filters perform as expected. If the preamplifier has remote control functions these are also tested. Preamps with tube circuits or complicated power supply topologies are connected at our long term test rig for extended stress testing under real world conditions. ----------------------------------------------------------------------- *Please note we are not a repair shop and only restore what we own. ---------- SkyFi Audio - Curators of Vintage Audio Gear SkyFi Audio is a small startup business specializing in the purchase, reconditioning, and reselling of high end audio equipment. We only buy equipment that we admire and are passionate about. ---------- PURCHASING GUIDELINES: 1) This item will be professionally packaged and insured for safe transit to your home unless you opt for local pickup from our shop. All local pickup items are only wrapped in industrial strength clear stretch wrap if the original manufacturer packaging is unavailable. Local pickup is available in Glen Rock, NJ, 07452, just a half hour drive from Midtown Manhattan, with convenient parking near our building. If we don’t have the original packaging, we use heavy-duty double-ply corrugated boxes with custom made to your item SealedAir Instapak expanding foam custom inserts. In many cases this has proven to be better than the original packaging! We also use high quality fiber reinforced tape to seal our packages. Lightweight items will be bubble wrapped and shipped in a high-quality box. 2) We will not review or accept any offers that do not go through the official eBay system. We have too many items for sale and it’s nearly impossible to keep track of offers outside of the official system. Please do not message, email, or text any offers. 3) Please ensure your shipping address is correct within eBay as we will ONLY ship to the eBay/PayPal Confirmed Shipping Address. No exceptions. 4) eBay may charge and collect sales tax to your state/jurisdiction which we have no control over. eBay v1.91BH × × × × × × × × × × × Buy now and save! Tell a friend Visit store Watch now Postage info UPS Ground - $0.00 Local Pickup - $0.00 Click the Postage tab above the listing description for more info Additional delivery notes PICK UP OPTION Our items are available for pick-up. Pick up procedure is as follows: Purchase the item through eBay Email us to coordinate pickup PAYING VIA PAYPAL We accept PayPal on our all our items so you can shop with confidence. Simple choose the PayPal option when proceeding through the checkout. Additional Information No additional information at this time Ask seller a question You might also like Dynavector 10x3 High-Output MC Phono Cartridge Music Reference RM-5 MK II Tube Preamplifier with Phono WyWires Silver Series Phono Interconnects - 5 Pin DIN w/ XLR Connectors - 4ft Music Reference RM-9 Tube Amplifier With EL34's Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © SkyFi Audio Postage Click the Postage tab above the listing description for more info Payment Accepted Payment Methods PayPal Returns Returns are not accepted Seller will pay for return shipping. eBay integration by

Price: 3740 USD

Location: Glen Rock, New Jersey

End Time: 2025-01-12T22:47:05.000Z

Shipping Cost: 0 USD