Non-Dismantle Injector Cleaner Tester Automotive Fuel System Tool Kit Adjustable

Description: AUTOOL C80 Injector Cleaning Kit, professional non-disassembly cleaning of the injector throttle and combustion chamber fuel system, the system is characterized by pressure-adjusted cleaning function, which effectively removes carbon, gum and other deposits. Supports different types of adapters, covering almost all adapters for cars and light trucks (gasoline) in the EU, Asia, and the USMulti-Function Kits Our cleaning kits include both high- and low-pressure cleaning, where you can adjust the working pressure of the spray as needed, which will help you do a better job of cleaning, as well as the entire fuel system, including the throttle, fuel injectors, and combustion chamber. Intake system cleaning, for example, reduces carbon buildup, improves fuel-air mixing ratios, and smooths out the idleTWC CONVERTER CLEANING:1. Pour the TWC detergent into the bottle.2. Close the oil outlet valve of the cleaner, open its air inlet valve and connect the compressed air. Adjust the air pressure to about 36psi, then close the intake valve.3. Connect the TWC flushing tool to the oil outlet pipe of the cleaner. Disconnect the Intake Vacuum Pipe which near the throttle and insert the TWC Flushing Nozzle into Intake Vacuum Pipe.4. Start the engine, and open the oil outlet slowly which be sure to make the detergent into engine vacuum pipe very slowly. The flushing process needs about 30 or 40 minutes.5. Keep the engine speed at 1000 rpm, accelerate once every 3~5 minutes, make the engine speed reach 2000~3000 rpm, and keep this state for 30 seconds. Then keep idling.6. Stop the engine after cleaning and reconnect the vacuum line.7. Start the engine at idle for about 5 to 10 minutes to drain the cleaning agent from the lines. INTAKE SYSTEM CLEANING: 1. Pour the throttle detergent into the bottle. 2. Close the oil outlet valve of the cleaner, open its air inlet valve and connect the compressed air. Adjust the air pressure to about 70psi (5kgf/cm2), then close the intake valve. 3. Connect the spray nozzle to the cleaner oil outlet port. Remove the pipe in front of the throttle valve before flushing. Put the nozzle into the throttle body and start the engine. Then open the cleaner oil outlet valve and start flushing. 4. Keep the engine speed at 1000 rpm, accelerate once every 3~5 minutes, make the engine speed reach 2000~3000 rpm, and keep this state for 30 seconds. Then keep idling. 5. Turn off the engine after cleaning and reconnect the intake line.Wide range of applications The range includes a wide range of connectors for cars and light trucks throughout the EU, Asia and the United States.Specifications:Pressure 0-150PSIWeight 1750gTank 800mlMaterial: Metal, RubberPackage Included: 1x AUTOOL C80 Fuel Injector Cleaner 1x Adapter Kits FUEL SYSTEM CLEANING: 1. Pour gasoline detergent into steel bottle. 2. Close the valve of the cleaner oil outlet pipe, open its air inlet valve and connect the compressed air. Adjust the pressure regulator to a suitable pressure of 43-57psi (3-4kgf/cm2) by the air regulating valve. 3. Connect the cleaner quick connector to the fuel supply line of the vehicle's fuel system. Check all connections for leaks. There must be no leaks during cleaning work. 4. Start the engine and keep it idling, then flush the fuel system. 5. Drain out the pressure in the bottle after flushing, and then disconnect the cleaner. 6. Restore all of the pipes of the fuel system and check if there have leakage.Steps to Check fuel injection model, throttle or EFI:1. Find out the fuel return hose, disconnect it and plug it with suitable adaptor; 2. Find out the fuel inlet hose, disconnect it and connect it with the outlet hose of the cleaner with proper adaptor; 3. Connect the outlet and return hose of the fuel tank, and open the tank cover; if there is not return hose, please move the fuse of the fuel pump so that the pump will not work; 4. Charge the cleaning fluid into the tank of the cleaner; 5. Connect the air source power to the air port of the cleaner, adjust its pressure 40-50PSI; 6. Check all connect point to make sure there is not leakage; 7. Start the engine to clean the fuel system. 8.To the throttle style system, the way of connection is the same, just adjust the pressure of the air source 1-5PSI. MORE PRODUCTSMORE PRODUCTSMORE PRODUCTS 3 YEARS WARRANTY Delivery DetailsMORE PRODUCTS MORE PRODUCTS MORE PRODUCTS 3 YEARS WARRANTY Delivery Details

Price: 69.99 USD

Location: Bordentown, New Jersey

End Time: 2025-01-06T18:08:51.000Z

Shipping Cost: 0 USD