Description: Item: TC-3™ Tape Caps are specifically designed to meet UL Standard 1439. Each molded plastic cap has three preassembled tape layers and a center targeting guideline. The construction simulates human touch that would occur during handling.The tape caps are consumed as part of standardized testing for sharp edges. For consistent and accurate results, all tape caps are custom made to fit precisely on the Sharp Edge Tester SET-50™. Each box contains 44 tape caps.Counterfeits and Knockoffs: Please be aware of listings that offer cheap, imitation sharp edge testing tools. They are designed to look like the SET-50™ and TC-3™ but are made abroad with inferior materials. Some of these counterfeit solutions will even use our company model number and contact info to make them appear legitimate. However, there is no guarantee these counterfeit tools help achieve UL 1439 safety standards. Description: Proudly Made in the USA, the SET-50™ and TC-3™ are the original, solution to satisfy UL Standard 1439 for the “determination of sharp edges”. This combination has been the leader in product safety testing equipment for edge sharpness since 1973.TC-3™ tape caps are specifically made for the Sharp Edge Tester SET-50™. Unlike other manufacturers, our tape caps fit precisely to ensure reliable and accurate test results. Each TC-3™ box contains 44 custom crafted tape caps.Tape caps are designed to test for sharp edges by simulating layers of skin on a finger. To conform with UL Standard 1439, every TC-3™ contains the following three (3) preassembled tape layers and a center guideline on a plastic cap:1 layer of Foam Black Tape1 layer of Foam White Tape1 layer of Teflon® TapeEach piece also feature a guideline on the center of the cap to help inspectors align the tool on the edge or surface being tested. TC-3™ tape caps slip on the pressure head of the Sharp Edge Tester SET-50™ for quick and easy testing.Each time a test is performed, a cut tape cap can be quickly identified, removed, and replaced within seconds, thus enabling more tests in less time. Tape caps are reusable until the test fails or any of the layers have been penetrated. At that point they must be discarded. It is important to have multiple tape caps on hand, especially during assembly line testing.By ordering the TC-3™ Tape Cap Kit with the SET-50™ Sharp Edge Tester, you will ensure ample supply of tape caps for testing and will also save on additional shipping and handling from a separate order.
Price: 150 USD
Location: Mesa, Arizona
End Time: 2024-12-21T20:48:13.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Sharp Edge Tester
Type: Tape Cap Kit
Unit Type: Unit
MPN: TC-3™
Country/Region of Manufacture: United States
Unit Quantity: 1
