p-Terphenyl, 99.9%, Scintillation Grade

Description: p-Terphenyl Analytical Reagents, Analytical/Chromatography, Arenes, Biochemicals and Reagents, Building Blocks, Chemical Synthesis, Detection, Fluorescence/Luminescence Spectroscopy, Fluorescent Probes, Labels, Particles and Stains, Luminescent Compounds/Detection, Organic Building Blocks, Scintillation Reagents, Spectroscopy, Wavelength Index Research, Development & Analytical Purposes Only PRODUCT DESCRIPTION CERTIFICATE OF ANALYSIS PN SC92944-30GM99.9%Scintillation GradeLN 13057B17ACAS 92-94-4 Appearance: white crystalline Assay: (HPLC) 99.9% Assay: (UV multicomponent) >99.9% Boiling point: 400°C Density: 1.043 Flash point: 188.1°C FTIR spectra: conforms Melting point: 212-213°C Suitability as a reagent in liquid scintillation GHS LABELING (accordance with 29 CFR 1910 (OSHA HCS)) Pictogram Irritant, Environment Signal word Warning Hazard statement(s) H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H410 Very toxic to aquatic life with long lasting effects. (HNOC) or not covered by GHS Do not handle until all safety precautions have been read (SDS) and understood. Not for direct use in food, cosmetics and or pharmaceuticals. NFPA RATING (National Fire Protection Association) Health 2 Flammability 1 Instability 0 Special hazard CERTIFICATE OF ANALYSIS, & MATERIAL SAFETY DATA SHEETS All product offered are new, with certified documentation. If you require a copy of these certificate of analysis or material safety data sheets before purchasing, or at the time of purchase, or with your product when shipped, just sent an email, I sent you a copy for your regulatory files. International customers you get a copy regardless, sent with your commercial invoice, a requirement for customs. Please read the disclaimer, at time of check-out. Thank you for your business, if you need another product that not listed, send a request, we have access for 18,000 compounds. “DISCLAIMER” ALL PRODUCTS ARE FOR RESEARCH AND DEVELOPMENT By ordering this item, you the purchaser agrees to all the terms and conditions of this disclaimer. All products sold on this site are for Research and Development purposes. You must be 21 years old or older to purchase. If you’re an international customer your responsible for any special permits or regulator forms before you order and to pay the duties and taxes. Buyer acknowledges that the research products have not been tested by Seller for safety and efficacy in food, drug, medical device, cosmetics. Seller makes no warranties of any kind, express or implied, that any products are fit for any purpose, then stated Grade or Purity. Buyer has the responsibility to verify the hazards and to conduct any further research necessary to learn the hazards involved in using research products purchased from Seller (see Safety Data Sheet’s (MSD’S). Buyer expressly represents and warrants to Seller that Buyer will properly handle any research products purchased from Seller in accordance with the practices of a reasonable person who is an expert in the field and in strict compliance with all applicable laws and regulations, now and hereinafter enacted. CANCEL ORDERS OR RETURNS CANCEL GROUND SHIPMENT ORDERS: all canceled orders that been shipped, a 20% restocking fee, shipping fee forfeit, and payment for the return postage by UPS Ground only and any UPS handling fees, package must ship back in original box with proper labeling, unopen. This offer is void if package been refused delivery, has been open, or not in original box due to DOT obligations. CANCEL INTERATIONAL ORDERS: all canceled orders that been shipped, that customer didn’t complete their obligations for their country: duties & taxes, permits, etc. A 50% restock fee, shipping forfeit, plus returned shipping with DHL, and DHL handling fees. So, call customs in your area to confirm what your obligations, before you make a purchase. This offer is void if package been refused delivery, been open, or not in original box due to IATA obligations. EXTRA SHIPPING AND HANDLING CHARGES: They maybe a few cases that the S&H may exceed listed price stated in listing. I will send you a carbon copy of UPS or DHL charges, and you will have the chance to pay the extra S&H charges or cancel the order without any penalties and be given a full refund. TRANSPORTATION INFORMATION, BASED ON THE MANUFACTURER (MSD’S) SECTION 14 Department of Transportation, Contiguous United States, our carrier UPS, Ground & Air Service International Maritime Dangerous Goods, (IMDG) we don’t offer water transport International Air Transport Association, (IATA) our carrier DHL, Air Service EBAY, TRUST AND SAFETY REQUIRES SELLERS THAT DOESN’T USE USPS AS THEIR CARRIER, THEY MUST SHOW THEY ARE SHIPPING LEGALLY AND, IN A MANNER, THAT PROTECT ALL HANDLERS OF SAID MATERIALS, SEE BELOW, CARRIERS, EXCEPTIONS, AND REGULATIONS. BOTH CARRIERS REQUIRE EACH SHIPPERS TO HAVE HAZMAT CERTIFICATIONS TRIENNIAL ON FILE USPS, PUBLICATION 52, HAZARDOUS MATERIALS “APPENDIX A” BASED ON MFG. MSD’S ID DOT Domestic Hazardous Materials Descriptions and Proper Shipping Hazard Number PG USPS Domestic Mail Names (a) Class (b) (c) (d) Mailability (e) Mail Air (f) Surface (g) Not dangerous goods n/a n/a n/a n/a n/a n/a (Section 3) Publication 52, Hazardous Materials (Category 33) Hazard Class Section (Subcategories 336.1) Small Quantity 336.1 Definition A small quantity is the maximum amount of a specific hazardous material that when transported by domestic surface transportation is not subject to any DOT requirements (e.g., packaging, marking, labeling, etc.) other than those in 49 CFR 173.4. Not every hazardous material is eligible to be shipped as a small quantity. Additionally, for Postal Service purposes, Class 1, Class 2, Division 6.2, and Class 7 materials are not permitted to be sent as a small quantity. The small quantity provision is applicable to domestic mail only, and its use is prohibited for international shipments or APO/FPO/DPO mail. The small quantity provision can be used only for domestic surface transportation (highway or rail). 336.2 Mailability Hazardous materials in Class 3, Division 4.1, Division 4.2 (Packing Groups II and III only), Division 4.3 (Packing Groups II and III only), Division 5.1, Division 5.2, Division 6.1 (Packing Group III only), Class 8, and Class 9 are eligible to be sent in domestic mail under the small quantity provision, via a USPS ground product (e.g. USPS Retail Ground, Parcel Select, Parcel Select Lightweight) only when each primary receptacle is limited to the following quantity, as applicable: 30 ml (1 oz.) or less for liquids. 30 g (1 oz.) or less for solids. 336.3 Additional Restrictions Materials identified in Appendix A as prohibited under column E, USPS Mailability, are ineligible for mailing under the small quantity provision without regard to their hazard class, division, or packing group. 336.4 Packaging and Marking Hazardous materials eligible to be shipped under the small quantity provision permitted in 49 CFR and 336.2 must be prepared following Packaging Instruction 10A in Appendix C. Each mail piece that qualifies to be sent under the small quantity provision must be clearly marked on the address side with the following words: “This package conforms to 49 CFR 173.4 for domestic highway or rail transport only.” UPS, Ground Regulations, for Shippers of Dangerous Goods You may call toll free, UPS Hazardous Materials Support Center, speak with material support specialist (Inside 48 Contiguous USA, Ground) DOT: Not dangerous goods (Exception) Not applicable UPS Ground, (Electronic Code of Federal Regulations) Title 49: Transportation PART 173.4 SHIPPERS, GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS §173.4 Small quantities for highway and rail. (a) When transported domestically by highway or rail in conformance with this section, quantities of Division 2.2 (except aerosols with no subsidiary hazard), Class 3, Division 4.1, Division 4.2 (PG II and III), Division 4.3 (PG II and III), Division 5.1, Division 5.2, Division 6.1, Class 7, Class 8, and Class 9 materials are not subject to any other requirements when- (1) The maximum quantity of material per inner receptacle or article is limited to- (i) Thirty (30) mL (1 ounce) for authorized liquids, other than Division 6.1, Packing Group I, Hazard Zone A or B materials; (ii) Thirty (30) g (1 ounce) for authorized solid materials; (iii) One (1) g (0.04 ounce) for authorized materials meeting the definition of a Division 6.1, Packing Group I, Hazard Zone A or B material. (v) Thirty (30) mL water capacity (1.8 cubic inches) for authorized Division 2.2 materials. (2) With the exception of temperature sensing devices, each inner receptacle: (i) Is not liquid-full at 55 °C (131 °F), and (ii) Is constructed of plastic having a minimum thickness of no less than 0.2 mm (0.008 inch), or earthenware, glass, or metal; (3) Each inner receptacle with a removable closure has its closure held securely in place with wire, tape, or other positive means; (4) Unless equivalent cushioning and absorbent material surrounds the inside packaging, each inner receptacle is securely packed in an inside packaging with cushioning and absorbent material that: (i) Will not react chemically with the material, and (ii) Is capable of absorbing the entire contents (if a liquid) of the receptacle; (5) The inside packaging is securely packed in a strong outer packaging; (6) The completed package, as demonstrated by prototype testing, is capable of sustaining— (i) Each of the following free drops made from a height of 1.8 m (5.9 feet) directly onto a solid unyielding surface without breakage or leakage from any inner receptacle and without a substantial reduction in the effectiveness of the package: (A) One drop flat on bottom; (B) One drop flat on top; (C) One drop flat on the long side; (D) One drop flat on the short side; and (E) One drop on a corner at the junction of three intersecting edges; and (ii) A compressive load as specified in §178.606(c) of this subchapter. Note to paragraph (a)(6): Each of the tests in paragraph (a)(6) of this section may be performed on a different but identical package; i.e., all tests need not be performed on the same package. (7) Placement of the material in the package or packing different materials in the package does not result in a violation of §173.21; (8) The gross mass of the completed package does not exceed 29 kg (64 pounds); (9) The package is not opened or otherwise altered until it is no longer in commerce; and (10) The shipper certifies conformance with this section by marking the outside of the package with the statement “This package conforms to 49 CFR 173.4 for domestic highway or rail transport only.” (b) A package containing a Class 7 (radioactive) material also must conform to the requirements of §173.421(a) through (e), §173.424(a)through (g), or §173.426(a) through (c) as applicable. (c) Packages which contain a Class 2 (other than those authorized in paragraph (a) of this section), Division 4.2 (PG I), or Division 4.3 (PG I) material conforming to paragraphs (a)(1) through (10) of this section may be offered for transportation or transported if approved by the Associate Administrator. (d) Lithium batteries and cells are not eligible for the exceptions provided in this section. DHL, Air International Regulations, for Shippers of Dangerous Goods You may call DHL toll free, request Dangerous Goods Hotline, speak with material support specialist (Outside 48 Contiguous USA, Air) IATA: UN number: 3077 Class: 9 Packing group: III Proper shipping name: Environmentally hazardous substance, solid, n.o.s. (p-Terphenyl) (Exception) Not restricted as per Special Provision A197 Foreign HC Code: 2902.90.9000 DHL Air, (Electronic Code of Federal Regulations) Prepared in accordance with IATA 2.6 or 49 CFR 173.4a are subject to regulations. SHIPPERS, GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS § 173.4a Excepted quantities. (a) Excepted quantities of materials, other than articles (e.g., aerosols), are not subject to requirements of this subchapter except for: (1) The shipper's responsibilities to properly class their material in accordance with § 173.22 of this subchapter; (2) Sections 171.15 and 171.16 of this subchapter pertaining to the reporting of incidents; and (3) For a Class 7 (Radioactive) material the requirements for an excepted package. (4) Packaging’s for which retention of liquid is a basic function must be capable of withstanding without leakage the pressure differential specified in § 173.27(c) of this part. (b) Authorized materials. Only materials authorized for transport aboard passenger aircraft and appropriately classed within one of the following hazard classes or divisions may be transported in accordance with this section: (1) Division 2.2 material with no subsidiary hazard. An aerosol is not included as authorized Division 2.2 material; (2) Class 3 materials; (3) Class 4 (PG II and III) materials except for self-reactive materials; (4) Division 5.1 (PG II and III); (5) Division 5.2 materials only when contained in a chemical kit, first aid kit or a polyester resin kit; (6) Division 6.1, other than PG I, Hazard Zone A or B material; (7) Class 7, Radioactive material in excepted packages (8) Class 8 (PG II and III), except for UN2803 (Gallium) and UN2809 (Mercury); and (9) Class 9, except for UN1845 (Carbon dioxide, solid or Dry ice), and lithium batteries and cells. (c) Inner packaging limits. The maximum quantity of hazardous materials in each inner packaging is limited to: (1) For toxic material with a Division 6.1 primary or subsidiary hazard, PG I or II - (i) 1 g (0.04 ounce) for solids; or (ii) 1 mL (0.03 ounce) for liquids; (2) 30 g (1 ounce) or 30 mL (1 ounce) for solids or liquids other than those covered in paragraph (c)(1) of this section; and (3) For gases a water capacity of 30 mL (1.8 cubic inches) or less. (d) Outer packaging aggregate quantity limits. The maximum aggregate quantity of hazardous material contained in each outer packaging must not exceed the limits provided in the following paragraphs. For outer packaging containing more than one hazardous material, the aggregate quantity of hazardous material must not exceed the lowest permitted maximum aggregate quantity. The limits are as follows: (1) For other than a Division 2.2 or Division 5.2 material: (i) Packing Group I - 300 g (0.66 pounds) for solids or 300 mL (0.08 gallons) for liquids; (ii) Packing Group II - 500 g (1.1 pounds) for solids or 500 mL (0.1 gallons) for liquids; (iii) Packing Group III - 1 kg (2.2 pounds) for solids or 1 L (0.2 gallons) for liquids; (2) For Division 2.2 material, 1 L (61 cubic inches); or (3) For Division 5.2 material, 500 g (1.1 pounds) for solids or 500 mL (0.1 gallons) for liquids. (e) Packaging materials. packaging used for the transport of excepted quantities must meet the following: (1) Each inner receptacle must be constructed of plastic, or of glass, porcelain, stoneware, earthenware or metal. When used for liquid hazardous materials, plastic inner packaging must have a thickness of not less than 0.2 mm (0.008 inch). (2) Each inner packaging with a removable closure must have its closure held securely in place with wire, tape or other positive means. Each inner receptacle having a neck with molded screw threads must have a leak proof, threaded type cap. The closure must not react chemically with the material. (3) Each inner packaging must be securely packed in an intermediate packaging with cushioning material in such a way that, under normal conditions of transport, it cannot break, be punctured or leak its contents. The completed package as prepared for transport must completely contain the contents in case of breakage or leakage, regardless of package orientation. For liquid hazardous materials, the intermediate or outer packaging must contain sufficient absorbent material that: (i) Will absorb the entire contents of the inner packaging. (ii) Will not react dangerously with the material or reduce the integrity or function of the packaging materials. (iii) When placed in the intermediate packaging, the absorbent material may be the cushioning material. (4) The intermediate packaging must be securely packed in a strong, rigid outer packaging. (5) Placement of the material in the package or packing different materials in the package must not result in a violation of § 173.21. (6) Each package must be of such a size that there is adequate space to apply all necessary markings. (7) The package is not opened or otherwise altered until it is no longer in commerce. (8) Overpacks may be used and may also contain packages of hazardous material or other materials not subject to the HMR subject to the requirements of § 173.25. (f) Package tests. The completed package as prepared for transport, with inner packaging filled to not less than 95% of their capacity for solids or 98% for liquids, must be capable of withstanding, as demonstrated by testing which is appropriately documented, without breakage or leakage of any inner packaging and without significant reduction in effectiveness: (1) Drops onto a solid unyielding surface from a height of 1.8 m (5.9 feet): (i) Where the sample is in the shape of a box, it must be dropped in each of the following orientations: (A) One drop flat on the bottom; (B) One drop flat on the top; (C) One drop flat on the longest side; (D) One drop flat on the shortest side; and (E) One drop on a corner at the junction of three intersecting edges. (ii) Where the sample is in the shape of a drum, it must be dropped in each of the following orientations: (A) One drop diagonally on the top chime, with the center of gravity directly above the point of impact; (B) One drop diagonally on the base chime; and (C) One drop flat on the side. (2) A compressive load as specified in § 178.606(c) of this subchapter. Each of the tests in this paragraph (f) of this section may be performed on a different but identical package; that is, all tests need not be performed on the same package. (g) Marking. Excepted quantities of hazardous materials packaged, marked, and otherwise offered and transported in accordance with this section must be durably and legibly marked with the following marking: (1) The “*” must be replaced by the primary hazard class, or when assigned, the division of each of the hazardous materials contained in the package. The “**” must be replaced by the name of the shipper or consignee if not shown elsewhere on the package. (2) The marking must be durable and clearly visible and in the form of a square. The hatching must be of the same color, black or red on white or a suitable contrasting background. The minimum dimensions must not be less than 100 mm (3.9 inches) by 100 mm (3.9 inches) as measured from the outside of the hatching forming the border. Where dimensions are not specified, all features shall be in approximate proportion to those shown. (i) Transitional exception - A marking in conformance with the requirements of this paragraph in effect on December 31, 2014, may continue to be used until December 31, 2016. (ii) For domestic transportation, a packaging marked prior to January 1, 2017 and in conformance with the requirements of this paragraph in effect on December 31, 2014, may continue in service until the end of its useful life. (3) When packages of excepted quantities are contained in an overpack, and the package marking required by this section is not visible inside the overpack, the excepted quantities marking must also be placed on the overpack. Additionally, an overpack containing packages of excepted quantities is not required to be marked with the word “OVERPACK.” (h) Documentation. (1) For transportation by highway or rail, no shipping paper is required. (2) For transport by air, a shipping paper is not required, except that, if a document such as an air waybill accompanies a shipment, the document must include the statement “Dangerous Goods in Excepted Quantities” and indicate the number of packages. (3) For transport by vessel, a shipping paper is required and must include the statement “Dangerous Goods in Excepted Quantities” and indicate the number of packages. (i) Training. Each person who offers or transports excepted quantities of hazardous materials must know about the requirements of this section. (j) Restrictions. Hazardous material packaged in accordance with this section may not be carried in checked or carry-on baggage.

Price: 59.65 USD

Location: Houston, Texas

End Time: 2024-12-16T15:47:07.000Z

Shipping Cost: N/A USD