Pen-Strep Solution 100x, 100mL

Description: DescriptionProduct Description Pen-strep solution is a mixture of penicillin-streptomycin, which is a common antibiotic used to prevent microbial contamination in vitro cell culture. Penicillin effectively inhibits gram-positive bacteria by interfering with cell wall synthesis. By binding to the 30S subunit of the bacterial ribosome, streptomycin inhibits the synthesis of bacterial proteins, thus inhibiting bacterial proliferation. It mainly acts on the gram-negative bacteria, but also has an effect on Gram-positive bacteria. Penicillin in combination with streptomycin prevents most bacterial contamination. This product contains penicillin 10000 U/mL, streptomycin 10 mg/mL, filtered by 0.1?m to remove bacteria. When using, add 1 mL of the mixture of Pen-Strep for every 100 mL of medium. Storage and Shipping Conditions Dry ice transportation; Store at -20?, valid for 12 months. Note 1. Thaw at 4? and mix well before use. To avoid repeated freezing-thawing, it is recommended to aliquot in small portions and store at -20? after the first thawing. 2. This product is a concentrated solution, please dilute it as required. 3. This product should not be kept at 4? or room temperature for a long time. Antibiotics will degrade at high temperature. 4. Please pay attention to aseptic operation during operation to avoid bacterial contamination. 5. Wear lab coats and disposable gloves during operation. For Research Use Only! " allowwhitespace="true" highlightstring="" style="box-sizing: inherit; --min-resolution:320; --min-font-size:var(--mobile-base-font-size); --min-font-size-scale:var(--mobile-font-size-scale); --min-fs--2:calc(var(--min-fs--1)/var(--min-font-size-scale)); --min-fs--1:calc(var(--min-fs-0)/var(--min-font-size-scale)); --min-fs-0:var(--min-font-size); --min-fs-1:calc(var(--min-fs-0)*var(--min-font-size-scale)); --min-fs-2:calc(var(--min-fs-1)*var(--min-font-size-scale)); --min-fs-3:calc(var(--min-fs-2)*var(--min-font-size-scale)); --min-fs-4:calc(var(--min-fs-3)*var(--min-font-size-scale)); --min-fs-5:calc(var(--min-fs-4)*var(--min-font-size-scale)); --min-fs-6:calc(var(--min-fs-5)*var(--min-font-size-scale)); --min-fs-7:calc(var(--min-fs-6)*var(--min-font-size-scale)); --max-resolution:1280; --max-font-size:var(--min-font-size); --max-font-size-scale:calc(var(--min-font-size-scale) + 0.11); --max-fs--2:calc(var(--max-fs--1)/var(--max-font-size-scale)); --max-fs--1:calc(var(--max-fs-0)/var(--max-font-size-scale)); --max-fs-0:var(--max-font-size); --max-fs-1:calc(var(--max-fs-0)*var(--max-font-size-scale)); --max-fs-2:calc(var(--max-fs-1)*var(--max-font-size-scale)); --max-fs-3:calc(var(--max-fs-2)*var(--max-font-size-scale)); --max-fs-4:calc(var(--max-fs-3)*var(--max-font-size-scale)); --max-fs-5:calc(var(--max-fs-4)*var(--max-font-size-scale)); --max-fs-6:calc(var(--max-fs-5)*var(--max-font-size-scale)); --max-fs-7:calc(var(--max-fs-6)*var(--max-font-size-scale)); --resolution-range:calc(var(--max-resolution) - var(--min-resolution)); --resolution:1200px; --resolution-progress:calc(var(--resolution) - var(--min-resolution)*1px); --interpolate-by:calc(var(--resolution-progress)/var(--resolution-range)); --range-fs--2:calc(var(--max-fs--2) - var(--min-fs--2)); --range-fs--1:calc(var(--max-fs--1) - var(--min-fs--1)); --range-fs-0:calc(var(--max-fs-0) - var(--min-fs-0)); --range-fs-1:calc(var(--max-fs-1) - var(--min-fs-1)); --range-fs-2:calc(var(--max-fs-2) - var(--min-fs-2)); --range-fs-3:calc(var(--max-fs-3) - var(--min-fs-3)); --range-fs-4:calc(var(--max-fs-4) - var(--min-fs-4)); --range-fs-5:calc(var(--max-fs-5) - var(--min-fs-5)); --range-fs-6:calc(var(--max-fs-6) - var(--min-fs-6)); --range-fs-7:calc(var(--max-fs-7) - var(--min-fs-7)); --fs--2:max(12px,calc(var(--min-fs--2)*1px + var(--range-fs--2)*var(--interpolate-by))); --fs--1:max(14px,calc(var(--min-fs--1)*1px + var(--range-fs--1)*var(--interpolate-by))); --fs-0:calc(var(--min-fs-0)*1px + var(--range-fs-0)*var(--interpolate-by)); --fs-1:calc(var(--min-fs-1)*1px + var(--range-fs-1)*var(--interpolate-by)); --fs-2:calc(var(--min-fs-2)*1px + var(--range-fs-2)*var(--interpolate-by)); --fs-3:calc(var(--min-fs-3)*1px + var(--range-fs-3)*var(--interpolate-by)); --fs-4:calc(var(--min-fs-4)*1px + var(--range-fs-4)*var(--interpolate-by)); --fs-5:calc(var(--min-fs-5)*1px + var(--range-fs-5)*var(--interpolate-by)); --fs-6:calc(var(--min-fs-6)*1px + var(--range-fs-6)*var(--interpolate-by)); --fs-7:calc(var(--min-fs-7)*1px + var(--range-fs-7)*var(--interpolate-by)); --line-height:1.5; --line-height-scale:0.95; --lh--2:calc(var(--lh--1)/var(--line-height-scale)); --lh--1:calc(var(--lh-0)/var(--line-height-scale)); --lh-0:var(--line-height); --lh-1:calc(var(--lh-0)*var(--line-height-scale)); --lh-2:calc(var(--lh-1)*var(--line-height-scale)); --lh-3:calc(var(--lh-2)*var(--line-height-scale)); --lh-4:calc(var(--lh-3)*var(--line-height-scale)); --lh-5:calc(var(--lh-4)*var(--line-height-scale)); --lh-6:calc(var(--lh-5)*var(--line-height-scale)); --lh-7:calc(var(--lh-6)*var(--line-height-scale)); margin: 0px; overflow-wrap: anywhere; word-break: break-word; font-size: var(--fs--1); line-height: var(--lh--1); --mobile-base-font-size:14; --mobile-font-size-scale:1.13;">Product DescriptionPen-strep solution is a mixture of penicillin-streptomycin, which is a common antibiotic used to prevent microbial contamination in vitro cell culture. Penicillin effectively inhibits gram-positive bacteria by interfering with cell wall synthesis. By binding to the 30S subunit of the bacterial ribosome, streptomycin inhibits the synthesis of bacterial proteins, thus inhibiting bacterial proliferation. It mainly acts on the gram-negative bacteria, but also has an effect on Gram-positive bacteria. Penicillin in combination with streptomycin prevents most bacterial contamination.This product contains penicillin 10000 U/mL, streptomycin 10 mg/mL, filtered by 0.1?m to remove bacteria. When using, add 1 mL of the mixture of Pen-Strep for every 100 mL of medium.Storage ConditionsStore at -20oC, valid for 12 months.Note1. Thaw at 4oC and mix well before use. To avoid repeated freezing-thawing, it is recommended to aliquot in small portions and store at -20oC after the first thawing.2. This product is a concentrated solution, please dilute it as required.3. This product should not be kept at 4? or room temperature for a long time. Antibiotics will degrade at high temperature.4. Please pay attention to aseptic operation during operation to avoid bacterial contamination.5. Wear lab coats and disposable gloves during operation. For Research Use Only!

Price: 21 USD

Location: San Diego, California

End Time: 2024-07-14T23:03:29.000Z

Shipping Cost: 3.99 USD