Harajuku Lovers

PIETTA 1851 NAVY CAP & BALL BLACKPOWDER MAGNA-TUSK™ ~ 1P IVORY SCROLL GRIPS

Description: Arizona Custom GripsPIETTA1851 NavyCap & Ball (Black Powder Percussion) Revolvers~ Exclusive ~ MAGNA-TUSK™ WHITE IVORY SCROLL ENGRAVED GRIPSMilled out of a solid block of Magna-Tusk, denser and heavier than regular Ivory or Stag. See below for details.~~~~~oNE-PIECE (nO SCREWHOLE) STYLETHIS AUCTION IS FOR OUR ONE-PIECE (NO SCREWHOLE) STYLE GRIPS. SEE BELOW. ********ONE-PIECE VS. TWO-PIECE STYLE GRIPS:A Choice for Every User! Two-Piece style grips incorporate a visible screw and screwhole, allowing easy and quick removal for cleaning or maintenance of your revolver. One-piece style grips do not use a screw but instead use an internal spacer. Both styles are traditional and historical designs and both were originally used on early Colts, so it is a matter of personal preference. Both styles of our grips will interchange and work on either style of grip frame. See below.One-Piece style grips (i.e., grips which do not have a visible screwhole in the grips) incorporate a user installed spacer (included with the grips) between the grip panels, as seen on many of the early Colts. The spacer is sent unmounted to ensure optimum fit with your revolver, with simple, quick installation which takes about one minute or so per grip. Fully illustrated instructions are included. This results in a rock-tight fit, without the need of a screw. Preferred by many collectors for their clean lines and traditional look. One-Piece style grips are removed by removing the three backstrap screws, and pulling the grip and backstrap backwards. Reinstallation is in reverse order. Alternatively, our Two-Piece style grips (i.e., grips with a visible screw and screwhole) offer the superior convenience of quick grip removal. They include a free Conversion kit, allowing their use on revolvers that are currently using one-piece style grips that do not have a grip pin. The conversion kit replaces the need for a grip pin and is actually a stronger design, and allows the grips to lock up tight on the frame, allowing no movement. This requires no modification to your revolver and gives you the advantage of the ease of maintenance of Two-Piece grips, while preserving the integrity of your revolver in original factory condition. Two-Piece style grips were also used on many of the early Colts, and are a traditional and iconic historical design, offering a distinctive look and convenience preferred by many collectors.Fully illustrated, detailed instructions are included with each set of grips. 01042300~~~~~WHAT THESE WILL FITThese grips WILL FIT the PIETTA 1851 Navy Cap & Ball (Black Powder Percussion) revolvers ONLY. This includes not only the standard Pietta 1851 Navys, but also “special edition” ’51 Navys, such as the: “1851 Navy Sheriff,” “1851 Captain Shaeffer,” “1851 Navy Reb Brass,” “1851 Navy Buntline,” “1851 Navy Griswold & Gunnison,” “1851 Navy Dlx,” “1851 Navy London,” “1851 Navy Old Silver,” “1851 Navy Pepperbox,” “1851 Navy US Marshal,” “1851 Confederate Navy,” “1851 Navy Yank,” and all other 1851 Navy style revolvers with the standard plowhandle style grip made by Pietta.IMPORTANT!! (Please read the following in its entirety):Please note that Pietta has used at least 6 different grip frames on their ’51 Navy revolvers. To ensure that we send the correct grips, after placing your order please send us an immediate email (or attach a message to your order) with the two-digit code found in the small rectangular box on your revolver. Please see the 2nd picture in the listing to see what this looks like. This code will either be two letters or two numbers. In addition, please send the first four digits of your serial number so we can identify your particular revolver. If we do not hear back from you, we will ship the latest version of grips to ensure we get these out on time.Also, please note that these will NOT fit the Uberti, Colt, Armi San Marco, or any other make of 1851 Navy revolver. Please see our other auctions for these, or send us an email and we will help you locate what you need. 09012200A note on the Italian-produced Revolvers:The Italian firms, located in Northern Italy, have been making SAA style revolvers now for well over a half century, and have made a huge number of makes and models and grip frame profiles with varying configurations over the years. We have an in-depth knowledge of the differing grip configurations, have a large library of gripframe variations from the various makers both old and new, and have vast experience making grips for Uberti, Pietta, Armi San Marco, and the other Italian gunmaking firms. Our experienced makers go to great lengths to ensure an exacting fit, including utilizing modern precision CNC production techniques, as well as incorporating old-time hand tuning and hand checking the fit of every grip on our reference frames prior to leaving our factory. We have a long list of many satisfied customers in the shooting industry who have purchased grips to use in a wide variety of applications, and we can safely and confidently guarantee proper fit and finish to your complete satisfaction.For an additional charge, custom fitting is an option. Please contact us for further details if you are interested in custom fitting. 11132000 Arizona Custom Grips About our exclusive Magna-Tusk™ “Hi-Grade” Ivory Grips: Our Ivory grips, an exclusive of Arizona Custom Grips, are made out of a premium high-grade, ultra-high density ivory material (Magna-Tusk™), designed from the ground up as a premium grip material to greatly improve on the inherent fragility and weakness of the cheaper Bonded Ivory used on just about all factory and regular aftermarket ivory grips today. Standard Bonded Ivory is brittle, and tends to weaken and develop stress fractures over time with repeated use, firing, and handling. Magna-Tusk™ is capable of withstanding the heaviest recoil and impact, and is the toughest alternative Ivory grip material available today, while still retaining the pristine look of real ivory. These grips are not cast or made out of an inferior, lightweight material, but are heavy and dense, carefully milled out of a solid block, one at a time. Magna-Tusk is completely rock-solid, stable, and water, chemical, and oil resistant. It is flame and heat resistant, will not melt like Urethane or plastic, and is entirely void-free, with over 10x the strength, durability, and impact resistance of alternative materials. Unlike with real ivory, there is no routine care and maintenance involved, with no danger of it drying out and cracking if not maintained properly or if left in the heat. It is produced with outstanding aesthetic properties and mechanical performance. When aged with our exclusive aging process, it takes on the equivalent of a 100-year-old patina, with subtle grain details which most experts cannot tell apart from the real thing. In addition, the material has a fine grain structure, which holds intricate detail for carvings, artistic relief work, etc., found on many historic grips. Dense, heavy, and solid, Magna-Tusk grips are in a class all their own. With our exclusive aging process, these grips are outstanding right out of the box, and will continue to improve over time. The more these grips are handled and used, the better they look! 040720 Please note that the photo used is a stock photo (a sample pair). Yours will appear similar to these. Customer satisfaction is important to us – we guarantee your complete satisfaction with every purchase!!

Price: 89.95 USD

Location: Mesa, Arizona

End Time: 2023-09-12T21:33:26.000Z

Shipping Cost: 5.99 USD

Product Images

PIETTA 1851 NAVY CAP & BALL BLACKPOWDER MAGNA-TUSK™ ~ 1P IVORY SCROLL GRIPSPIETTA 1851 NAVY CAP & BALL BLACKPOWDER MAGNA-TUSK™ ~ 1P IVORY SCROLL GRIPS

Item Specifics

All returns accepted: ReturnsNotAccepted

Brand: Arizona Custom Grips

Model: PIETTA 1851 NAVY

MPN: Does Not Apply

Country/Region of Manufacture: United States

Available Variations

Color: No Medallion

Price: 89.95 USD

Available Quantity: 100

Quantity Sold: 11

Color: Silver Colt

Price: 109.95 USD

Available Quantity: 100

Quantity Sold: 0

Color: Gold Colt

Price: 109.95 USD

Available Quantity: 100

Quantity Sold: 2

Recommended

EAA BOUNTY HUNTER 2P SAA GRIPS ~ MAGNA-TUSK™ BLACK IVORY, TWO-PIECE Style
EAA BOUNTY HUNTER 2P SAA GRIPS ~ MAGNA-TUSK™ BLACK IVORY, TWO-PIECE Style

$94.95

View Details
RUGER BEARCAT MAGNA-TUSK™ IVORY GRIPS (Schofield Cut)
RUGER BEARCAT MAGNA-TUSK™ IVORY GRIPS (Schofield Cut)

$79.95

View Details
UBERTI 1858 REMINGTON GRIPS ~ MAGNA-TUSK™ AGED DISTRESSED IVORY
UBERTI 1858 REMINGTON GRIPS ~ MAGNA-TUSK™ AGED DISTRESSED IVORY

$94.95

View Details
UBERTI SAA MAGNA-TUSK™ BLACK IVORY GRIPS 1P Floral Cattleman Evil Roy El Patron
UBERTI SAA MAGNA-TUSK™ BLACK IVORY GRIPS 1P Floral Cattleman Evil Roy El Patron

$109.95

View Details
RUGER BLACKHAWK, VAQUERO, SINGLE SIX, WRANGLER ~ Magna-Tusk™ WHITE STAG GRIPS QR
RUGER BLACKHAWK, VAQUERO, SINGLE SIX, WRANGLER ~ Magna-Tusk™ WHITE STAG GRIPS QR

$94.95

View Details
UBERTI BIRDSHEAD MAGNA-TUSK™ 2P White Stag Grips ~ Cimarron Cattleman Stallion
UBERTI BIRDSHEAD MAGNA-TUSK™ 2P White Stag Grips ~ Cimarron Cattleman Stallion

$94.95

View Details
RUGER PRE-1963 XR3 BLACKHAWK & SINGLE SIX GRIPS ~ Magna-Tusk™ WHITE STAG
RUGER PRE-1963 XR3 BLACKHAWK & SINGLE SIX GRIPS ~ Magna-Tusk™ WHITE STAG

$94.95

View Details
PIETTA 1858 REMINGTON (BLACK POWDER) GRIPS ~ MAGNA-TUSK™ Aged Scroll Engraving
PIETTA 1858 REMINGTON (BLACK POWDER) GRIPS ~ MAGNA-TUSK™ Aged Scroll Engraving

$94.95

View Details
PIETTA 1858 REMINGTON GRIPS ~ MAGNA-TUSK™ Black Ivory Scrollwork Engraved
PIETTA 1858 REMINGTON GRIPS ~ MAGNA-TUSK™ Black Ivory Scrollwork Engraved

$104.95

View Details
RUGER BLACKHAWK, VAQUERO, SINGLE SIX, WRANGLER GRIPS ~ Magna-Tusk Aged Ivory
RUGER BLACKHAWK, VAQUERO, SINGLE SIX, WRANGLER GRIPS ~ Magna-Tusk Aged Ivory

$89.95

View Details