Description: Arizona Custom GripsPietta1860 ArmyCap & Ball and Cartridge Revolvers (see below): - Pietta 1860 Army Blackpowder (Cap and Ball) Percussion Revolvers -- Pietta 1851 Navy “Yank Steel” (in .44 Caliber, 1860 sized grip frame) -- Pietta (Traditions, etc.) Frontier in .44 Magnum, and select .357 Magnums, with the 1860 sized grip frame -- Pietta (EMF) Great Western II: Alchimista I, II, and III -- Pietta (Cimarron) El Malo II (NOT the El Malo I)–- Pietta (Cimarron) Eliminator -- and other Pietta Revolvers with the 1860 Army sized gripframe -~see below for specific details~ ~ Exclusive ~ MAGNA-TUSK™ Aged ivory GRIPSwith scroll engravingMilled out of a solid block of Magna-Tusk, denser and heavier than regular Ivory or Stag. See below for details.~~~~~oNE-PIECE (nO SCREWHOLE) STYLETHIS AUCTION IS FOR OUR ONE-PIECE (NO SCREWHOLE) STYLE GRIPS. SEE BELOW.********Note: Two-Piece grips, in addition to a visible screw, have a grip pin installed in the frame to help hold them in place. One-Piece grips (grips with no visible screw) use a spacer between the panels, with no screw and no grip pin. BOTH styles of our grips will interchange and work on either style of grip frame. See below. One-Piece style grips (i.e., grips which do not have a visible screwhole in the grips) incorporate a user installed spacer between the grip panels, as seen on many of the early Colts. This results in a rock-tight fit, without the need of a screw. Preferred by many collectors for their clean lines and traditional look, One-Piece style grips are removed by removing the three backstrap screws, and pulling the grip and backstrap backwards. Reinstallation is in reverse order. Our One-Piece style grips will work on either style gripframe (either One-Piece or Two-Piece style grip frames). Fully illustrated instructions included for quick and easy installation.Alternatively, our Two-Piece style grips (i.e., grips with a visible screw) offer the superior convenience of quick grip removal. Unlike with One-Piece grips, the backstrap need not be removed to remove the grips for cleaning and maintenance of the revolver. Our Two-Piece grips include a free Conversion kit (allowing their use on One-Piece style frames) which replaces the need for a grip pin and is actually a stronger design, and allows the grips to lock up tight, allowing no movement. This requires no modification to your revolver and gives you the advantage of the ease of maintenance of Two-Piece grips, while preserving the integrity of your revolver in original factory condition. Two-Piece style grips were also used on many of the early Colts, and are a traditional and iconic historical design, offering a distinctive look and convenience preferred by many collectors.Fully illustrated, detailed instructions are included with each set of grips. 22010345~~~~~WHAT THESE WILL FIT:(Note: Please read these paragraphs thoroughly, including the “Will NOT Fit” section below). These grips WILL FIT all of the following: Blackpowder Revolvers: * Pietta 1860 Army .44 Caliber Blackpowder (Cap & Ball Percussion) revolvers; * Pietta 1851 Navy Steel Frame Blackpowder Revolvers in .44 Caliber Only (Note: these have the 1860 Army (3-1/2” tall) sized gripframe; these grips will NOT fit the other 51 Navy’s with the shorter 3-1/8” gripframe); Cartridge Revolvers: * Pietta (Traditions, etc.) Frontier .44 Magnum (and a few .357 Magnum Frontiers using the 3-1/2” tall 1860 grip frame);* Pietta (EMF) Great Western II Alchimista I, II, or III; * Cimarron El Malo II (Note: will NOT fit the El Malo I); * Cimarron Eliminator;* AND ALL other Pietta Cartridge Firing revolvers using the 1860 Army sized (3-1/2” high) grip frame. To make sure you are ordering the correct grip, please check your grip frame measurement prior to ordering. Your grips or grip frame should measure somewhere around 3-1/2” tall, depending on how you hold your ruler, tape, or caliper. The important thing is to make sure they are NOT around 3-1/16 – 3-1/8” tall, which requires our standard (shorter) 1873 SAA sized grip. Please contact us if you have any questions, or cannot find the proper grip, and we will be happy to help. What these will NOT fit: These grips are made to fit ONLY Pietta revolvers, and will NOT fit anything made by Uberti, Armi San Marco, Colt, or any other manufacturer. If you have one of these other makes of revolvers and cannot find the grip you need, please contact us and we will be happy to help.Also, please note that these will NOT fit the Bisley, the Birdshead, the Thunderer, Thunderball, or the Lightning style revolvers, which use a completely different We also offer these Custom Fit to your revolver gripframe in separate auction listings, for those interested. 22011965 Arizona Custom Grips About Magna-Tusk™ Ivory and Stag Grips: Magna-Tusk™ Ivory and Stag grips, a product of Arizona Custom Grips, are manufactured out of our high-grade, high density ivory material designed exclusively as a premium, high-strength grip material. Vastly superior to standard bonded ivory or stag found on most factory and other aftermarket grips, Magna-Tusk™ is capable of withstanding the heaviest recoil and impact, and is the toughest alternative grip material available today, while still retaining the pristine look of real ivory or stag. It is rock-solid, stable, and water, chemical, and oil resistant. It is flame and heat resistant, and is entirely void-free, with over 10x the strength, durability, and impact resistance of alternative materials. Unlike with real ivory or stag, there is no routine care and maintenance involved, with no danger of it drying out and cracking if not maintained properly or if left in the heat. It is filled with premium natural compounds to produce outstanding aesthetic properties and mechanical performance. When aged with our natural aging process, it takes on the equivalent of a 100-year-old patina, with subtle grain details which many experts cannot tell apart from the real thing. In addition, the material has a fine grain structure, which holds intricate detail for carvings, artistic relief work, etc., found on many historic grips. 08292000About Our Aging Process:We go to great efforts to ensure that our Aged Ivory or Stag not only looks similar to, but in fact looks identical to the real thing. Our Magna-Tusk blanks will produce an aged Ivory grip unlike any other material made today. Our aged grips feature an authentic aged patina, just like the originals, with a process incorporating concentrated U.V. light (the essential aging property in natural sunlight), along with a developer/control agent that is put on the grips to carefully control U.V. absorption, in a sealed, high-oxygen environment to accelerate the natural aging process. Through this aging process, these grips become beautifully mottled, variegated, and weathered just like old, antique Ivory, and incorporate other authentic details found on original old Ivory as seen on many of the revolvers which belonged to gunfighters and lawmen of the Old West. As with real aged Ivory, Magna-Tusk develops a variegated patina due to its authentic grain structure, and natural aging produces an authentic appearance and genuine patina which extends into and below the surface. Not only does this give it the appearance of authenticity and depth, but this surface will not chip, crack, or peel like a superficially applied coating. With Magna-Tusk aged grips, most experts cannot tell them apart from a decades-old or even a centuries-old original. While the quality difference is somewhat noticeable in the photos, the difference is even more apparent when seen and handled in person. Many of our repeat sales are made by the very customers we sell to, who take their grips to the range, where our grips are immediately seen and noticed by others. If you are interested in ordering grips for a Brace of pistols, please order both sets together, and we will ensure a better matchup when selecting pairs. Dense, heavy, and solid, Magna-Tusk grips are in a class all their own. With our exclusive aging process, these grips are outstanding right out of the box, and will continue to improve over time. The more these grips are handled and used, the better they look! 08292000 Please note that the photo used is a stock photo (a sample pair). Yours will appear similar to these. Customer satisfaction is important to us – we guarantee your complete satisfaction with every purchase!!
Price: 99.95 USD
Location: Mesa, Arizona
End Time: 2024-04-06T16:15:18.000Z
Shipping Cost: 5.99 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
For Gun Make: Pietta 1860 Army, Cartridge or Cap & Ball
Material/Finish: Magna-Tusk Aged Scroll
MPN: Does Not Apply
For Gun Type: Pietta 1860 Army, Cartridge or Cap & Ball
Brand: Arizona Custom Grips
Available Variations
Color: Silver Liberty Eagle
Price: 109.95 USD
Available Quantity: 0
Quantity Sold: 0
Color: Gold Liberty Eagle
Price: 109.95 USD
Available Quantity: 0
Quantity Sold: 0
Color: Antique Nickel Steer Skull
Price: 109.95 USD
Available Quantity: 0
Quantity Sold: 0
Color: Red Steer Skull
Price: 109.95 USD
Available Quantity: 0
Quantity Sold: 0
Color: No Medallion
Price: 99.95 USD
Available Quantity: 106
Quantity Sold: 14
Color: Silver Colt
Price: 124.95 USD
Available Quantity: 100
Quantity Sold: 2
Color: Gold Colt
Price: 124.95 USD
Available Quantity: 104
Quantity Sold: 7
