Description: Genuine Williams/Bally Replacement Part By Permission of Planetary Pinball Supply, Inc This is the chip containing the CPU game code for the TWILIGHT ZONE pinball.It is the latest COMMERCIAL (coin accepting) version 9.2 available from Bally Williams . Please read below to see the improvements this offers. The chip will be ready to plug and play and will come with an installed official Bally Williams sticker. **INCLUDED in the shipping package is a card with the LINK for the REMOVAL & INSTALLATION INSTRUCTIONS**Purchaser must read and agree to the license agreement located below. Note: if you are currently getting a checksum error message on the display you should replace the cpu chip with a new one of these. Version 9.2 Date: February 28, 1995 U6: Checksum: 9392 Changes from revision L-4: Bonus X lamp is now ensured to be off at the end of Lost in the Zone. Extended ball recycling time at end of Lost in the Zone. Fixed the multiball jackpot display effect. It would incorrectly report the score awarded if the jackpot was over 127 million and the jackpot was doubled by the powerball. The game can now hold scores up to 1 trillion, even though scores will be truncated when they are above 9.9 billion. (High scores in the 10 billions are now displayed.) Added a new adjustment to allow ball savers beyond ball one. FREE RIDE TIME (A.2 27) must be set to non-zero for this to be enabled. Despite what the note in P-1 says, the game would not play multiball correctly with only one ball installed. It now does. Version L-4 Date: June 14, 1993 U6: Checksum: 3204 Changes from revision L-3: Added "EX. EASY" settings for piano and slot. When set to extra easy, they are always lit, and do not need to be requalified. Added Italy 3 pricing of 2 coins per play with no Bonus. Added logic to allow the 1-coin buy-in on the new Italy 3 pricing. Selecting Italy 3 pricing also auto-sets the 1/coin for buy-in adjustment. Version L-3 Date: May 24, 1993 U6: Checksum: 6403 Changes from revision L-2: When either ITALY 2 or SWISS 2 pricing is selected, the game will automatically switch to the CREDIT OR COIN setting for the A.2 01 Buy-in adjustment. If the ball popper pops, but a gumball is not dispensed, the game will dispense a gumball (1 only) on any ball search before the ball ends (if the ball ends, there obviously isn't an extra ball in the gumball machine). Version L-2 Date: May 7, 1993 U6: Checksum: B902 Changes from revision L-1: Enhanced logic on the gumball entry opto. Spurious switch hits after a popper pop no longer dispenses an extra ball. Fixed the difficulty presets. They were causing German and Euro jumpered games to change the pricing incorrectly. Gumball test now kicks balls out of the lockup. The logic for loading "extra" balls into the gumball machine has been enhanced to check for a stuck 4th trough switch. Added an adjustment for the number of balls in the gumball machine. Camera award equalized during tournament play. Version L-1 Date: April 23, 1993 U6: Checksum: E801 Changes from revision P-4: Initial release to production. Gumball machine no longer empties during Lost in the Zone if it is not working. Powerball detection can no longer be faked out during multiball. Equalized the slot machine door award in tournament. If the powerball is detected out during rematch, the game will go into powerball mode when rematch expires. Enhanced broken switch logic for the left ramp. Center magnet names (switch and coil) changed to "NOT USED". Pressing both flippers will speed up the bonus countdown. Enhanced the broken switch logic on the powerfield enter switch. Added Super Robot award at 99 robots. (Left ramp or lock.) Fixed rematch effect. Side kicker (rocket) no longer makes sounds in tilt and game over. Fixed a bunch of sound/music effect priority clashes. Clock now keeps time in attract mode after 2 minutes of idle time. Enhanced the autofire logic for Lost in the Zone. Version P-4 Date: April 16, 1993 U6: Checksum: E0D4 Changes from revision P-3: Enhanced gumball test. Added magnet test. Implemented "Disable Gumball" adjustment. Gumballs are simulated in this case, or when the right magnet opto or gumball diverter are broken. Game now detects if the powerball is missing. When it is missing, disabled by adjustment, or the gumball machine is not working, then the powerball is simulated. Clock errors are now detected and reported. Added French translations. The powerball is now tracked through the gumball machine to count the number of balls stored there. An error is reported if the count is incorrect. Once it is verified that there is at least one ball in the gumball machine, then gumball dispensing is sped up. (It is started on the ball popper.) Added buy-in cancel display messages. Added broken ramp switch compensation logic. Version P-3 Date: April 2, 1993 U6: Checksum: 47D3 Changes from revision P-1: Added German translations. Added new extra ball effects for 2nd and 3rd extra balls. Dead End bonus added for 8 and 20 dead ends. Clock Millions damage bonus added for 6 hits on the clock. Changed buy-in pricing for Italy to 1 coin/1 credit. Added GUM-BALL combo award. Multiball modes now work properly with only 1 ball installed in the game. Added Lost in the Zone champ. Version P-1 Date: March 19, 1993 U6: PA-1 Checksum: 7BD1 PX-1 Checksum: 7ED1 Initial release for building sample games. WILLIAMS ELECTRONICS GAMES, INC. SOFTWARE LICENSE PLEASE READ THIS LICENSE CAREFULLY 1. License. The software installed through this process (the "Software") and any related documentation provided to you are licensed to you by Williams Electronics Games, Inc. or its affiliates ("Williams"), subject to the terms and conditions in this License Agreement. Williams retains title to the Software and related documentation. This license allows you to use the Software only in the specific pinball games manufactured by Williams and marketed under the WILLIAMS or BALLY trademark for which the Software is intended ("Pinball Games"). To do this, you are permitted to transfer the Software into a Flash ROM device in the Pinball Game. Other than the copy of the Software installed for you during this process, one (1) archival copy thereof, and the Flash ROM copies for installation into the Pinball Games, you may make no copies of the Software. You may not transfer or sublicense your license rights in the Software to another party or distribute copies of the Software, except that you may install Flash ROM copies of the Software into Pinball Games owned by others as part of servicing such Pinball Games, provided the owners of the Pinball Games read and agree to accept the terms and conditions of this License Agreement and provided you do not charge an additional fee for the provision of the Flash ROM copy of the Software. Under no circumstances may you sell copies of the Software, including Flash ROM copies. You may not publish the Software. 2. Restrictions. The Software contains copyrighted material, trade secrets and other proprietary material. You may not decompile, reverse engineer, disassemble or otherwise reduce the Software to a human-perceivable form. You may not modify, network, rent, lease, loan, or create derivative works based upon the Software in whole or in part. You may not electronically transmit the Software from one computer to another over a network. 3. Termination. This License Agreement is effective until terminated. You may terminate this License Agreement at any time by destroying the Software, related documentation and all copies thereof. This License Agreement will terminate immediately without notice from Williams if you fail to comply with any provision of this License Agreement. Termination of this License Agreement terminates the license granted hereunder. Accordingly, upon termination of this License Agreement you must destroy the Software, related documentation and all copies thereof in your possession or under your control. 4. Export Law Assurances. You agree and certify that neither the Software nor any other technical data received from Williams, nor the direct product thereof, will be exported outside the United States except as authorized and as permitted by the laws and regulations of the United States. If the Software has been rightfully obtained by you outside of the United States, you agree that you will not re-export the Software nor any other technical data received from Williams, nor the direct product thereof, except as permitted by the laws and regulations of the of the United States and the laws and regulations of the jurisdiction in which you obtained the Software. 5. Government End Users. If you are acquiring the Software on behalf of any unit or agency of the United States Government, the following provisions apply. The Government agrees: (i) if the Software is supplied to the Department of Defense (DoD), the Software is classified as "Commercial Computer Software" and the Government is acquiring only "restricted rights" in the Software and its documentation as that term is defined in Clause 252.227-7013(c)(1) of the DFARS; and (ii) if the Software is supplied to any unit or agency of the United States Government other than DoD, the Government's rights in the Software and its documentation will be as defined in Clause 52.277-19(c)(2) of the FAR or, in the case of NASA, in Clause 18-52.227-896(d) of the NASA Supplement to the FAR. 6. Disclaimer of Warranty on Software. You expressly acknowledge and agree that use of the Software is at your sole risk. The Software and related documentation are provided "AS IS" and without warranty of any kind and Williams EXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. WILLIAMS DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED. FURTHERMORE, WILLIAMS DOES NOT WARRANT OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE SOFTWARE OR RELATED DOCUMENTATION IN TERMS OF THEIR CORRECTNESS, ACCURACY, RELIABILITY, OR OTHERWISE. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY WILLIAMS OR A WILLIAMS AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU (AND NOT WILLIAMS OR A WILLIAMS AUTHORIZED REPRESENTATIVE) ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. 7. Limitation of Liability. UNDER NO CIRCUMSTANCES INCLUDING NEGLIGENCE, SHALL WILLIAMS BE LIABLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES THAT RESULT FROM THE USE OR INABILITY TO USE THE SOFTWARE OR RELATED DOCUMENTATION, EVEN IF WILLIAMS OR A WILLIAMS AUTHORIZED REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. 8. Controlling Law and Severability. This License Agreement shall be governed by and construed in accordance with the laws of the United States and the State of Illinois, as applied to agreements entered into and to be performed entirely within Illinois between Illinois residents. If for any reason a court of competent jurisdiction finds any provision of this License Agreement, or a portion thereof, to be unenforceable, that provision of the License Agreement shall be enforced to the maximum extent permissible so as to effect the intent of the parties, and the remainder of this License Agreement shall continue in full force and effect. 9. Complete Agreement. This License Agreement constitutes the entire agreement between the parties with respect to the use of the Software and the related documentation and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding such subject matter. No amendment to or modification of this License Agreement will be binding unless in writing and signed by a duly authorized representative of Williams. Please be sure to visit my eBay store for lots of hard to find pinball parts!! We supply ALL the ROMS & EPROMS for your pinball machines.If you don’t see your particular game listed, contact me. I also carry pinball security chips, 5101, 6116, 6264, 6800, 6810, 6821, 6502, 6532, and many more hard to find I.C.’s for old pinball machines. NO matter what the shipping calculator says, I will combine shipping. Up to 8 chips will ship for the price of one auction.
Price: 11.95 USD
Location: Collingwood, Ontario
End Time: 2024-11-17T16:05:40.000Z
Shipping Cost: 9 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Bally
