Description: I am selling a pump action kit for AEA HP max 50, 510 or 45 cal air rifle or 10 in air pistol without regulator.It works well with original round magazines. For airgun with regulator, check my standard kit. For shorter pistol, check my other kit. Note: The bottom vertical grip is stubby, so that you will put your hands very close to the slider, to ensure pump action goes smoothly without much torque. The kit for sale includes a front slider, a hoop, and a rear dovetail clamp, as shown in the 2nd picture. Compatible with original magazine! Airgun not included. The forehand slider Is 3D printed with solid premium tough filament at100% (max allowedby printer) infil, The slider comes assembeled with a carbon fiber /stainless steel composite tube. A pusher made of aluminum alloy is another critical part in the kit. The rear dovetail adaptor is 3dprinted with solid carbon fiber PC at 100% infill. Both parts need to be installed for proper functioning. Instrunction will come with the kit. I offer post-sale help including replacement of faulty parts or modification if needed for functioning. You can choose the color of the front slider. Rear adaptor is always black---I believe carbonfiber PC is the best materiual for the purpose. I put demo kit (normally a previous version or experimental version--function well for pump action anyways) for 20% off occasioanlly---just check my other items! Note: I can do resonable modifications to the front slider, including adding or removing pica rails, adding or removing letter, etc. Pls let me know. Allow 3-5 days to make. Those premium filaments takes ~30 hours to print to achieve high strength. I always have one set in stock--just ask since the color is normally gray or black which may not be your choice. . See videohow similar kit (Removable nylon grip shown in the video , which is not easy to install and not as comfortable as TPU to the palm, but I am working on it. The one for sale is with one-piece vertical non-removevable grip.) work: https://youtu.be/-Y3mJ7WpBtA?si=hxgwYZtajgJVJC4C Installation: https://youtu.be/8O_t9Iyz67c?si=M4IhZ9vIlC4H5Jym Attention: make sure to tighten up the set screw on top of the rear u- shaped clamp. The screws on the u-clamp may become a bit loose after couple days due to plastic settling under pressure, then tighten them -- it should be good to go without further settling after 1-2 check/tightening. It takes some practice to get famaliar. One tip is that if the 1st cycle went wrong, don't try to cycle twice or you will get double load and have to use a rod to remove jammed pellets. It may happen to original bolt action too. A bit silicon grease on the bolt handle-pusher hoop helps a lot to make it smooth. I am a fan of HP max so you are welcome to discuss technical problems.
Price: 115 USD
Location: Carlisle, Massachusetts
End Time: 2024-07-22T02:14:31.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Unbranded
Type: PCP Adapter
Model: For AEA HP MAx 50
MPN: n/a
Country/Region of Manufacture: United States
California Prop 65 Warning: MAy contain materials defined by Cal65 as carcinogenic
