SANSI 36W=350W LED Motion Sensor Security Lights 3600LM Dusk to Dawn FloodLight

Description: Dusk to Dawn MODE Put the "Mode" switch in the D2D position. Function: The light turns on automatically at dusk or night and turns off at dawn or if it’s too bright for your sensor. D2D Mode only works at night. When it's bright around the sensor, it goes off automatically. Except for Lux, Time and Range don't work while using this mode. TEST MODE Set-up: Put the "Mode" switch at the Test position. Function: The light turns on for only 5 seconds during daytime or night once it detects motion. This mode is used for checking whether the sensor is working properly. Test Mode can work during the daytime and night. Except for Range, the Lux and Time Setting doesn't work while using this mode. AUTO MODE Put the "Mode" switch at the Auto position. Function: When the sensor detects motion, it lights up for 1-10 minutes according to the time it has been set. While using the auto mode, the toggle switches off and 2 seconds later on again. The light turns on continuously for ca. 8 hrs and goes off in the daytime. Auto Mode only works at night. When it's bright (> 100-150 LUX) around the sensor, the light goes automatically back to Auto Mode. ON-TIME MODE Set-up: Put the "Mode" switch at the On-Time position. Function: Light can work as a standard LED light without motion sensing. The light turns on when switched on, turns off when switch off. On-Time Mode can work during the daytime and night. The Lux, Time, and Range Setting doesn't work while using this mode. Sensor Sensitivity(LUX) Set the sensitivity for the sensor to differ from daytime to nighttime. Only works in D2D mode. ***Please do not put the knob at MAX position when first using. Please try to put the knob in the 1/2 position to keep it working properly. Stand By Time From 1-10 minutes, choose a suitable value as you need. Only works in Auto mode. ***Before installation, please first use the test mode to check whether the light can work properly Detecting Range Rotate the knob to adjust sensing range up to MAX 50ft motion coverage when installed at 8ft height. Only works in Auto mode. Please ensure that there are no light sources around here before installing it to keep working properly. Four Working Modes Test mode: Testing and checking. Auto mode: Auto-on for 1-10 minutes when motion is detected at night On-time mode: Being controlled by an on/off switch whether daytime or nighttime Dusk to dawn mode: Auto-on at night time and auto-off during daytime Upgraded SANSI LED Security Motion Sensor Outdoor Lights, 36W(250W Incandescent Equivalent) 3600lm, 5000K Daylight, Dusk to Dawn Waterproof Flood Light, ETL Listed, Black HIGH PERFORMANCE: 2 ultra-bright LED light heads with 8 LED Bulbs (pixel heat sink), produce up to 3600lm high brightness clear white light with only 36W providing efficient lighting for your exterior living environment and adding extra safety to your home. AUTO ON AND OFF: Built-in motion/dusk-to-dawn sensors with 180° sensing angle and max 50ft sensing range, auto-on when motion is detected, auto-off after a pre-determined time when no further motion is detected. Simply choose your preferred location for the outdoor security light; mount and wire it to light it on. HIGHER QUALITY: Rugged and compact housing, excellent ceramic sealed lens technology ensures excellent heat dissipation and long-lasting performance. This weatherproof light provides a sustainable and stable performance for Outdoor Use. WIDE COVERAGE RANGE: The Light Coverage can light up to 50ft x 50ft at a Mounting Height of 13ft. LED light shines down and covers an expansive area from the fixture's placement. Easy and fast DIY installation, instructions, mounting wires, and accessories are all included. PREMIUM CUSTOMER SERVICE: 5-Year Un-limited Warranty means you are covered for replacement or refund. Have LED technical questions or need design advice? Please feel free to contact us. PACKAGE INCLUDED:1 x SANSI 36W LED Security light White/Black version1 x Bar-shaped Mounting Plate1 x Waterproof Gasket and 3 x Screws3 x Wire Connectors1 x Mounting Bolt1 x Rubber Screw Plug1 x Instruction Booklet On Sep 29, 2022 at 23:12:34 PDT, seller added the following information:First: No reason to return within 30 days after receiving the goodsSecond(1) The seller pays the return shipping fee under the following circumstances: the fault party is the seller, and the shipping fee generated by the return is paid by the seller A. The buyer feels that the photos do not match the product description or that the product has certain defects. B. The received product does not work, the product is broken. C. The seller sent less spare parts when delivering the goods. D. The seller sent the wrong item when delivering the goods. E. After the buyer receives the goods, the goods are in a damaged state. (2) The return shipping fee is paid by the buyer in the following cases:The main reason for requesting a return is that the buyer himself does not want the item.For example:A. After receiving the goods, the buyer will feel that the product is not suitable and choose to return it. B. After buying the product, you don?t like it or don?t want it anymore, and you want to return it. C. After receiving the product, you found that other companies have a lower price, so I want to return it. D. It is purely because the buyer suddenly doesn't like the product and wants to return it. Our new products are generally guaranteed for five years, but the five-year warranty does not mean that any damage to the product within five years can be replaced unconditionallyIf your product is older than one year, you need to pay for shippingIf your product is more than two years old, you need to pay part of the product price and freight according to the specific situationSecond-hand product warranty period of three months

Price: 49.99 USD

Location: Union City, California

End Time: 2023-12-11T10:54:11.000Z

Shipping Cost: 0 USD