Description: Sensor SmartEye Mark II SERKF1. SMARTYEYE® MARK II with Red LED, knob adjustment, 4-wire M12 Connector and F1 Fiberoptic Optical Block. 12 to 24 VDC Supply Voltage, polarity protected. The maximum range depends on fiberoptic. Features high-gain combined with very high-speed. These high performance sensors were designed to resolve the most difficult sensing tasks...the hallmark of all TRI-TRONICS SMARTEYE® sensors. In addition to superior high gain/high speed, the MARK II is equipped with many new improvements such as EDR® (Enhanced Dynamic Range). EDR® eliminates dark-state saturation that can dramatically reduce sensor resolution. NPN and PNP outputs and a switch to set light or dark operate are included. Fully encapsulated this sensor will withstand harsh environments. Features: Adjustment Type: Knob Connection Type: Connector, 4-pin M12 Housing Type: Rectangular Optical Block: Type F1, Fiberoptic Adapter Adapts sensor to any standard fiber optic light guide with .187" O.D. tips. The light guide is inserted and held in place with a slide-action snap. LED Light Source: Red = 660nm Visible red LED light source recommended for sensing transparent/translucent objects. Outperforms infrared light in many moderate to low contrast applications. Also recommended for use with plastic fiberoptic light guides. Sensing Range: Opposed Mode with F1: 1.5ft. Opposed Mode with F1 with Lens: 20ft. + Proximity Mode with F1: 4.5in using a .125in diameter fiber bundle Proximity Mode with F1 with Lens: 14in using a .125in diameter fiber bundle Technical DataAdditional informationSupply Voltage:12 to 24 VDC Polarity ProtectedCurrent Requirements:85mA (exclusive of load)Output Transistors: (1) NPN and (1) PNP sensor output transistor NPN Sink up to 150mA PNP Source up to 150mA Momentary short circuit protected Outputs protected from pulsing during power up Light/dark switch de4termines output status Light = Light "ON" operate Dark = Dark "ON" operate Response TimeMinimum duration of input event Light state response = 50 microseconds Dark state response = 140 microseconds Leading edge variation less than 20 microsecondsHysteresis:Less than 400 millivolts for maximum sensitivity and resolutionIndicators:OUTPUT INDICATOR: Red LED illuminates and the NPN or PNP outputs switch to the opposite state when retunred light level exceed "5" on the CONTRAST INDICATOR EDR® INDICATOR - Intensity of GREEN LED provides indication of where in the dynamic operating range the offset, EDR® adjustment has been set FULLY LlT: Operating near saturation OFF: Operating near maximum sensing range CONTRAST INDICATOR – Displays scaled reading of sensor's response to contrasting light levels (light vs. dark) on a ten bar LED displayLight Immunity:Responds to sensor’s pulse modulated light source, resulting in high immunity to most ambient light, including high intensity strobesAmbient Temperature:-40°C to 70°C (-40°F to158°F)Rugged Construction:Chemical resistant, high-impact polycarbonate housing Waterproof, NEMA 4X, 6P and IP67 enclosure ratings Epoxy encapsulated for mechanical strength
Price: 215 USD
Location: San Diego, California
End Time: 2024-05-02T16:26:09.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Tri-Tronics
Custom Bundle: No
MPN: SERKF1
Country/Region of Manufacture: United States
Modified Item: No
