Small Block Chevy/ Chrysler, 409 Chevy 8.5mm Nylon Plug Wire Separator Kit

Description: Squeeg's Kustoms / Squeeg's Hot Rod Connection Squeeg’s offers a simple solution to clean Spark Plug Wire routing! Instead of the typical separators where the wires are laid out flat these separators group the wires tighter for a cleaner, less cluttered look. Since the lines simply clip into the separators it is easy to remove the lines without having to unbolt anything. Made of black nylon. Looks great on any engine. 14 Piece Kit fits: Chrysler 1966-89 273, 318, 340, 360 General Motors 1959-86 262, 267, 283, 302, 305, 307, 327, 350, 400 General Motors 1958-65 348,409For 8.5mm Spark Plug Wires Only. Kits for 7mm & 8mm wires also available. All of our products are proudly 100% made in the U.S.A. Our products are original designs meant to fill a void in the market, not just a copy of something already being offered. We have been using these parts for years in the shop on the cars we drive and build at Squeeg’s Kustoms. Look for our other parts on our eBay store. Also available from Squeeg’s Hot Rod Connection Aluminum Ferrules: A unique alternative to simply using a rubber grommet when routing lines, cables, wires, etc. through any panel. Deep enough to run through frame rails or can be used on thin sheet metal panels. 5 sizes available from ¼” to 1 ¼”. Plug Wire Separators: Black anodized aluminum separators for plug wires. Just like our Line Separators, the wires simply clip in to make installation and future servicing a snap with no fiddly hardware to lose. Offered in 8mm and 8.5mm. There are 6 kits for Big Block Chevy, Small Block Chevy, and Small Block Ford. Also available are the individual components so customers can build their own kits. The wire mounts are sold two per pack and the floating separators four per kit. There are 14 different components available. Bulkheads: Currently 5 items consisting of an aluminum bolt-on brake line bulkhead and 4 steel weld-in frame bulkheads to run lines or wiring through your frame. Weld in bulkheads available with a plain removable plate or with two terminals perfect for running wiring from your battery to your starter. Squeeg’s offers its own design of bulkhead plates for use in any frame. Chose from a blank plate or with terminals. The weld-in plate consists of ¼ 1018 steel and is milled to accept a precision fitted cap. Offered in an oval or round design, these plates will allow you to run your plumbing or electrical through your frame rails. The electrical plate consists of two nylon insulated terminals with brass inserts. The small terminal is tapped at 10/32 and the large is at ¼ 20. This is ideal for running electrical to the starter. We also offer a blank plate which can be drilled for AN bulkhead fitting for plumbing or any other use you may need. Epoxy Primer Filler Kits and Epoxy Top Coat Kits: Looking for the good stuff you used to use? Our legendary Epoxy Primer is still available! The same stuff we’ve been using in the shop for decades is still available. As this product cannot be shipped to some areas please contact us for more information. Exhaust Tips: Beautiful brushed stainless steel exhaust tips flared at the ends designed to be welded on. Available for 2”, 2-1/2” & 3” exhaust. Line Separators: Black anodized aluminum line separators for Fuel Line, Oil Line, Heater Line & A/C Line – including the new EZ-Clip A/C Line. Separators for two, three or four lines available in all popular configurations. An innovative design where the lines simply clip in to make installation and future servicing a snap with no fiddly hardware to lose. Currently, there are 16 parts in the A/C & Heater category and 34 for Fuel and Oil lines. Matching Plug Wire Separators also available. Pewter Key Chains: Based on original artwork by Jimmy Smith of cars built by Squeeg’s Kustoms. 6 designs available; 32 Ford Coupe, 33 Ford Roadster, 34 Ford Coupe, 36 Ford Coupe, 40 Ford Coupe, and 50 Merc Custom. Steering Wheels, Adapters & Spacer: Cast aluminum I Beam style perfect for early hot rods. Available smooth or drilled, as cast or polished, wrapped or unwrapped. 8 configurations currently offered. Two column adapters available: early Ford (1928-48) keyed columns and GM splined columns as well as an Aluminum ½” spacer. T-Shirts: 10 Styles available featuring artwork by Jimmy Smith. Each style is available in either Black or White in Sizes from Small through 3XL. Many clearance shirts are available in various colors as well as Women’s shirts. PROP 65 WARNING: May contain materials known to the state of California to cause cancer or reproductive harm.

Price: 36.95 USD

Location: Chandler, Arizona

End Time: 2024-02-16T01:09:36.000Z

Shipping Cost: 9.45 USD