Spectracom SecureSync 213 BroadShield OCXO GPS GLONASS NTP Network Time Server

Description: Tested/Guaranteed • Fully Working • BroadShield Software Option • Dual Power Option • Rinex Software Option • Upgraded u-blox M8T GPS/GLONASS/Galileo Multi-GNSS Receiver Installed • OCXO Upgraded Oscillator • Stratum 1 NTP Time Server • 10MHz GPSDO Disciplined Oscillator • Includes Rack Ears A new set of rack ears are included. Introduction Here's a lightly used SecureSync GPS NTP server with an OCXO upgraded internal oscillator for better free-running stability. The optional BroadShield anti-spoofing software is enabled so I have left the firmware at v5.8.4 as changing the firmware will probably over-write the BroadShield option. The unit has a U-blox M8T high performance GPS/GLONASS/Galileo/Beidou receiver card installed - which tracked 18-20 satellites from the three constellations using my regular L1 GPS test antenna. You can select up to three constellations for the receiver to track. For your peace of mind the unit has been tested and confirmed to operate as expected - see screenshots below taken during testing. A professional grade outdoor 5V antenna with a complete view if the sky will be required for the unit to operate to full specification. I usually have some suitable antenna listed separately (and can make a recommendation if required), and a suitable downlead can be obtained from a cable fabricator. The listing comprises the SecureSync server and rack ears as shown. No unpictured accessories, cables, documents or software are included. The photos show the actual item for sale. Full product information may be obtained from the User Manual (https://www.prostudioconnection.net/1502/SecureSync_Manual.pdf) Features Modular, secure synchronization system Precision time-keeping via OCXO oscillator Supported input/output signals (type and quantity dependent on signal and configuration): GPS, Secure GPS (L1/L2, SAASM: GB-GRAM or MRU) 1PPS Frequency (10 MHz) ASCII time codes Modular (configure-to-order) ruggedized shock and vibration-tested chassis Exceptional Operating Temperature Range of -20 C to +65 C High bandwidth NTP performance Ethernet 10/100 Base-T Secure Network Management: enable or disable protocols for encryption, authentication, authorization and accounting IPv4/IPv6 dual stack Usually Sells for $5,000+ Description SecureSync combines Spectracom’s precision master clock technology and secure network-centric approach with a compact modular hardware design to bring you a powerful time & frequency reference system at the lowest cost of ownership. Military and commercial applications alike will benefit from its extreme reliability, security, and flexibility for synchronizing critical operations. An important advantage of SecureSync is its unique rugged chassis designed to meet Mil 810F for environmental performance. The modular design provides for the most cost effective solution. Built-in time and frequency functions are extended with up to 6 input/output modules (not included). Included with the base unit is an extremely accurate 1PPS timing signal aligned to a 10 MHz frequency signal without any 10 MHz phase discontinuity. On-board clocks synchronize to a variety of external references as standard, factory-installed, or upgradeable options. Choose from a variety of option cards [not included] to add to your configuration of timing signals, including additional 1PPS, 10MHz, time code (IRIG, ASCII, HaveQuick), other frequencies (5 MHz, 2.048 MHz, 1.544 MHz), telecom T1/E1 data rates, multi-network NTP, and PTP. To support network time synchronization, SecureSync supports the latest features of network time protocol (NTP) and precision time protocol (PTP, IEEE-1588v2) [Option not installed]. An optional multi-port NTP configuration [included] allows for operation across 4 isolated LAN segments. For security, system management can be restricted to a dedicated management LAN. Up to 6 PTP ports can be added [not included] to operate in various PTP deployments. SecureSync is a security-hardened network appliance designed to meet rigorous network security standards and best practices. It ensures accurate timing through multiple references, tamper-proof management, and extensive logging. Robust network protocols are used to allow for easy but secure configuration. Features can be enabled or disabled based on your network policies. Installation is aided by DHCP (IPv4), AUTOCONF (IPv6), and a front-panel keypad and display. The 1 RU chassis supports GPS input. Features Modular, secure synchronization system for mission critical networks Internal precision time-keeping via OCXO oscillator Supported input/output signals (type and quantity dependent on signal and configuration): •GPS, Secure GPS (L1/L2, SAASM: GB-GRAM or MRU) 1PPS Frequency (10 MHz) ASCII time codes Modular (configure-to-order) ruggedized shock and vibration-tested chassis Exceptional Operating Temperature Range of -20 C to +65 C High bandwidth NTP performance Ethernet 10/100 Base-T Secure Network Management: enable or disable protocols for encryption, authentication, authorization and accounting IPv4/IPv6 dual stack

Price: 1640.8 USD

Location: Winter Garden, Florida

End Time: 2023-12-26T18:12:54.000Z

Shipping Cost: N/A USD