Speedway Motors 37° Degree AN Standard Tube Brake Fuel Line Flaring Tool

Description: Essential Tool for AN Fittings: The Speedway 37 Degree AN Flare Tubing Standard Tube Flaring Tool is specifically designed for creating clean and accurate 37 degree single flares required for AN fittings., Versatile Compatibility: This tool works with various soft metal tubing materials such as aluminum, copper, and mild steel, making it perfect for brake or fuel lines., Wide Range of Tubing Sizes: The flaring tool is compatible with tubing sizes ranging from 3/16" to 5/8" OD, including 3/16", 1/4", 5/16", 3/8", 1/2", and 5/8"., Easy to Use: With its simple and user-friendly design, this tool ensures easy and hassle-free operation, allowing you to make precise flares every time., Not for Stainless Steel: Please note that this flaring tool is not recommended for use with stainless steel tub Speedway 37 Degree AN Flare Tubing Standard Tube Flaring Tool Sku # 91089520 Mfr. Part # 91089520 Condition New Brand Speedway Motors Sold Each Details Info This is the tool you need to make ONLY 37° flares required for AN fittings. This tool will NOT make 45° flares for standard brake and fuel lines which are not compatible with AN hardware. This tool makes a clean, accurate 37° flare every time. Simple and easy to use. Necessary for making ONLY 37° flares for AN fittings Will NOT make 45° flares for standard brake and fuel lines that are NOT compatible with AN hardware Makes a clean, accurate flare every time Simple and easy to use Works on tubing from 3/16" to 5/8" Not recommended for use on stainless steel This item is replacement for sku# 91089529 Works on 3/16", 1/4", 5/16", 3/8", 1/2" and 5/8" OD soft metal tubing such as aluminum, copper and mild steel. Note: If flaring stainless steel line, we strongly recommend our ratcheting flaring tool. Learn more about flaring lines for our automotive fittings by reading our tech article.. Charts (JPG) Installation Tips The manufacturer recommends using this tool only on soft material lines. However, we have had good luck using it on 3/16" steel lines. Extensive use on 3/16" lines or on larger steel lines may result in wearing out the tool quicker. We recommend using a lubricant on the swedge. Deluxe tool 910-89528 is recommended when working with steel tubing exclusively. If flaring stainless steel line, we strongly recommend our ratcheting flaring tool. Not recommended for use on stainless steel tubing. Specs Material Type Steel Sold in Quantity Each Notes Woks on aluminum, copper, or mild steel tubing sizes: 3/16", 1/4", 5/16", 3/8", 1/2", and 5/8" O.D.s. Not for use on stainless steel tubing. MFG. Part # 91089520 Degree of Taper 37 degree Reviews does the job but clean threads first! Rated by Jim on March 19, 2021 Summary: Used with aluminum tubing and had great results making 37 flares. Be sure to clean all threads first, I noticed some grabbing when spinning the wing nuts down, after a few tries the wing nut seized up when I tried backing it off fully (eventually snapped when I put a wrench on the wing nut for leverage). Thankfully customer service was great and had a replacement out quickly. Noticed similar issue with replacement, cleaned with wd40 before first use and is butter smooth now. Yes, I recommend this product. Good to go Rated by G Lincoln on September 05, 2020 Summary: Looks good but have not used it yet! Waiting on tube to arrive...... Yes, I recommend this product. Looks like a good quality tool Rated by Tiny on September 02, 2020 Summary: Building the brakes on my homemade T Bucket pickup Yes, I recommend this product. I would buy this product again. Rated by Scoopdogg on August 15, 2020 Summary: A must have when you are flaring gas lines. Yes, I recommend this product. i would buy again when this one get lost Rated by butch on August 11, 2020 Summary: needed to do the job Yes, I recommend this product. Related Items / Suggested Parts Speedway Deluxe 37 Degree AN Line Flaring Tool Aluminum Hard Fuel Line/Tubing, 1/4 Inch O.D. Aluminum Hard Fuel Line/Tubing, 3/8 Inch O.D. Aluminum Hard Fuel Line/Tubing, 1/2 Inch O.D. Aluminum Hard Fuel Line/Tubing, 5/8 Inch O.D. 37 Degree Flaring Tool for Stainless Steel Line Speedway Handheld Lever Tube Bender, 3/16 Inch Brake Line Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Price: 34.99 USD

Location: Lincoln, Nebraska

End Time: 2024-07-29T18:24:38.000Z

Shipping Cost: 0 USD