Speedway Motors Serpentine Front Drive Kit, LS Engine, Black

Description: The bracket fits both Gen III/IV LS series cylinder heads, Conveniently repositions A/C compressor away from frame rail, It utilizes commonly available and affordable Sanden 508 compressors, Brackets come completely assembled with stainless hardware, Available in a black powder coated, chrome or raw steel finish Speedway Motors Serpentine Front Drive Kit, LS Engine, Black Sku # 91668046-BLK Mfr. Part # 91668046-RAW Condition New Brand Bills Hot Rod Co Sold Set Details Info Serpentine drive brackets fit both Gen 3 and Gen 4 LS series cylinder heads Repositions A/C compressor up and away from frame rail for better engine fit Utilizes commonly available and affordable Sanden 508 AC compressor LS accessory brackets come completely assembled with stainless hardware Alternator/PS bracket designed to use standard GM alternators and GM Type II PS pump Spacer kits (sold separately) adapt to F-Body LS1, GTO, Gen 5 Camaro, or GM truck front drive offset Choose between black powder coated, chrome plated, or raw steel finishes A Compact Serpentine Drive Solution for Your Budget LS Swap For the most part LS swaps are a trouble free affair, which is why they are so popular. That said, where we often see people run into issues is in classic car swaps where the frame/front subframe’s engine crossmember and steering gear box interfere with the LS engine’s factory low mounting location for the air conditioning compressor and power steering pump. Speedway Motors has developed a new wallet friendly LS accessory drive kit to solve this issue. Our Bill’s Hot Rod Co. 1100 Series LS accessory drive kit includes an alternator bracket and power steering pump bracket, and air conditioning bracket that solves these issues. These LS simple brackets relocate the accessories to a higher, outside position on the engine, but well below the hood line of most vehicles. This frees up the lower sides of the engine block for mounting clearance into the chassis of your classic car, allowing the stock frame/engine crossmember to work with nothing more than motor mount adapters or swap mounts. Pre-Assembled Steel Brackets Are Strong and Easy to Install The combination alternator/power steering pump LS accessory brackets are designed to use from 1998-2002 Camaro/Firebird, 2000-2015 GM truck, Cadillac CTS-V LS6/LS2, and 2010-2015 Camaro applications. For applicable simply source from 1998-2002 4th Gen Camaro/Firebird (GM 26086074) along with the proper GM pulley (GM 12559885). The LS accessory drive kit system works with the short Corvette water pump (GM 89018052), mid-length “wide pulley” 4th Gen Camaro water pump (GM 19256263), or long truck length water pump (GM 19207665). This truck length water pump can be sourced from a LS3/L99 5th Gen Camaro application. It is the same length as a truck water pump with a driver’s side upper radiator hose connection. These LS simple brackets come completely assembled with all stainless steel bolts and washers, illustrated instruction sheet, and belt size recommendations. The included A/C compressor bracket is designed to mount aftermarket onto Gen 3/Gen 4 GM LS engines (non-supercharged). It works with all water pump applications noted previously above. Note that an additional spacer kit may be required to work with certain accessory combinations, such as the LS3 accessory drive (depending on what vehicle your engine’s accessories came from). See additional spacer notes in our installation tips section for more details. Lastly, if you’re working with a bare engine (such as a new crate engine), we do offer our Bills Hot Rod Co. 200 Series bracket kit in an all-inclusive with new accessories, belt tensioner, serpentine belt, power steering reservoir, and more in long, mid, and short drive configurations! OE PN 89018052 (LS2, no spacers required): 2004-2007 Cadillac CTS-V (LS2/LS6) 2005-2008 Chevrolet Corvette Z06 2008-2009 Pontiac G8 GT OE PN 19256263 (LS1/LS6, use spacer kit ): 1997-2004 Chevrolet Corvette 1998-2002 Chevrolet Camaro Z28 and SS 1998-2002 Pontiac Firebird Formula and Trans Am 2004-2006 Pontiac GTO OE PN 19207665 (LS3/L99, use spacer kit for the Alt & P/S and spacer kit for AC): 2010-2015 Chevrolet Camaro SS Charts (PDF) (PDF) Installation Tips An additional spacer kit may be required to work with certain water pump and harmonic damper combinations (depending on what vehicle your engine came from). If using accessories from a Corvette (non-supercharged), CTS-V LS6/LS2, or Pontiac G8, no additional spacers are necessary. If using accessories from a Camaro/Firebird LS1 or Pontiac GTO, you'll need an . If using accessories from a 2010-15 Camaro (non-supercharged) or GM truck, you'll need our plus our to complete the installation. Specs Hardware Included Yes Water Pump Included No Alternator Brackets Included Yes A/C Bracket Included Yes Tensioner Included Yes A/C Compressor Included No Crankshaft Pulley Included No Alternator Included No Idler Brackets Included Yes Idler Included Yes MFG. Part # 91668046-RAW Power Steering Pump Reservoir Included No A/C Bracket Material Steel Power Steering Pump Brackets Included Yes A/C Mounting Side Passenger Side Alternator Mounting Side Driver Side Power Steering Mounting Side Driver Side Alternator Bracket Material Steel Power Steering Pump Bracket Material Steel Reviews Really nice parts Rated by 1950 Ford on December 03, 2020 Summary: Brackets are made from high quality steel and burnt with what appears to be a waterjet which leaves really smooth edges. Would have liked the factory tensor to have been utilized.. Yes, I recommend this product. Extremely well made and easy to use. Rated by Chad Trip on July 14, 2020 Summary: All in all an exceptional value that I would commit to over and over. Pros: Precision cut Yes, I recommend this product. Great value Rated by < ST> Joemama on March 13, 2020 Summary: Looks great. Fits great. And you cant beat the price! Related Items / Suggested Parts Bills Hot Rod Co 1100 Series Camaro/Truck LS Alt. and P/S Spacers Bills Hot Rod Co 1100 Series F-Body/GTO LS Swap Bracket Spacers Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Price: 235.99 USD

Location: Lincoln, Nebraska

End Time: 2024-11-03T18:01:54.000Z

Shipping Cost: 0 USD