Stainless Secondary Air Tube fits Lopi Endeavor, 1750, Revere, Avalon 1750 stove

Description: Important: The wall thickness of my stainless steel tubes is 74% greater than the Lopi factory-made stainless steel replacement tubes. Thicker tube walls mean longer life. Do it once and do it right! This listing is for one single stainless steel secondary air tube for the Lopi Endeavor, 380-NT, Revere, X-NT, Republic, 1750, & Avalon 1750 wood burning stove or fireplace insert manufactured up to and including year 2019. Although a bit lengthy, please read the entire listing... (Please see my other listings for complete sets of 3 stainless steel secondary air tubes, stainless spring roll pins, door hinge pins, and other stove parts.) This listing includes the following: one stainless steel perforated tube, one steel collar, and two stainless steel spring pins. (FYI, this tube is one component of manufacturer's item number 98900233, which is a complete set of 3 tubes.) This single tube will fit in either the middle or rear tube position in the firebox. It will NOT work in the front tube position. I am a retired pipefitter, and fabricate this replacement stainless steel tube myself. The tube is type 304L, schedule 40 stainless steel pipe. I include two stainless steel spring pins with the stainless steel tube - my experience has been that the original plain steel spring pins lose their "springiness" over the years. I suppose this is due to the many cycles of high heat and cool-down in the firebox. Also included is a steel sliding collar which, in conjunction with the spring pins, keeps the tube locked in proper alignment. Here are some examples of feedback that my secondary air tube customers have left for me: *Well made, and custom collars worked perfectly. Thank you Kris *As described and arrived quickly. Thanks *Awesome seller! Quick to answer questions, fast shipping, quality item. Thanx! *Very HAPPY!! Items better quality than what came with original stove! *Thanks for the customer service! Great! *Perfect fit. Very pleased with purchase *Very Fast. Great instructions. Part fit great! *Good attention to details, Courteous and Responsive. Would purchase again. *Parts fit perfectly. Thanks for the amazing speed! Installation is not difficult. You will need a hammer, vice-grips (7" size works great), long-nosed pliers, and possibly a 1/4" punch. This single tube may be installed in either the middle or rear tube position. Use the vice-grips to grasp, twist, and pull out the old spring pins. If there isn't enough pin sticking out to get the pliers on, you can use a punch and hammer to drive them up into the tubes. Slide the collar to the left an inch or so, lower the right side of the tube so that it clears the short pipe stub on the right, and pull loose from the welded socket on the left. Slide the new collar over the new tube, insert the left end of the tube into the welded socket on the left, and slide the collar to the right, over the short pipe stub. Use the closed long-nose pliers to line up the right-hand hole in the sliding collar with the hole in the short pipe stub on the right (a common #2 phillips screwdriver also works well for this). Use the vice-grips to grasp the spring pin (see helpful hint below), and use the hammer to tap it into the hole that you just lined up. Be sure to keep the spring pin straight. The spring pin can be a bit difficult to start in the pipe stub, but it will go in, so stick with it. After you get the spring pin started in the hole in the pipe stub, drive it in with the hammer until about 1/4" or so is still exposed. Now center the left hole in the sliding collar with the hole in the air tube, and install the spring pin in the same manner. Helpful hints...*Shovel out the ashes from the firebox before installing the new tubes. Trying to find a dropped spring pin in the ashes is like trying to find your car keys that you dropped in the snow. *The holes in the sliding collars are slightly larger than the spring pin holes in the tubes - the spring pin does not fit tightly in the sliding collar holes.*Note that the spring pins have a slot down one side. When installing the spring pins, if you put the jaws of the vice-grips on either side of the slot and squeeze the slot shut, it will hammer in much easier. Don't get carried away with the vice-grips... use just enough pressure to close the slot. You don't want to deform the spring pin with too much pressure.*If you have to punch the old spring pin up into the pipe stub, it can be retrieved with long-nose pliers. Or, you can just push it into the secondary air duct, where it will lay harmlessly for the life of the stove. *If you wear bifocals like I do, you may find it helpful to lay crossways in front of the stove (on you left shoulder, if you are right-handed) to do the work. Disregard this helpful hint if you can tip your head way farther back than I can, in order to focus properly! Arkansas residents subject to 7.75% sales tax.The use of manufacturer's part numbers is for informational purposes only, and does not denote that the listed item is an OEM part. Since the use of the information contained in the product documentation, including this document, and the conditions under which the products are used are beyond the control of the Seller, it is the obligation of each user of the products to carefully read and understand this document and all other documentation, instructions, and manuals supplied with the products and to determine the correct and safe methods of installations, inspection, testing, operation, and maintenance of the products, and the correct and safe conditions of use of the products and any systems into which they may be integrated by the user. In addition to the disclaimers and limitations of liability set forth below, in no event may Seller be held responsible for the products or for any property damage or personal injuries arising out of the use or handling of the products. Seller recommends having all products installed by a qualified technician. DISCLAIMER OF WARRANTIES. USERS’ USE OF THE PRODUCT IS AT THEIR SOLE RISK. (EXCEPT FOR ANY EXPRESS LIMITED WARRANTY THAT MAY BE PROVIDED FOR A SPECIFIC PRODUCT.) SELLER EXPRESSLY DISCLAIMS, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ALL WARRANTIES OF ANY KIND, WHETHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING BY STATUTE OR OTHERWISE IN LAW OR FROM A COURSE OF DEALING OR USAGE OF TRADE. NO ADVICE OR INFORMATION, WHETHER ORAL OR WRITTEN, OBTAINED BY YOU FROM SELLER, OR CONTAINED IN THIS DOCUMENT OR ANY OF THE SELLER’S OR MANUFACTURER’S PRODUCT DOCUMENTATION, SHALL CREATE ANY WARRANTY. LIMITATION OF LIABILITY. (OTHER THAN REMEDIES THAT ARE GRANTED UNDER ANY EXPRESS LIMITED WARRANTY THAT MAY BE PROVIDED FOR SPECIFIC PRODUCTS) SELLER SHALL NOT BE LIABLE FOR, NOR SHALL YOU MAKE ANY CLAIM FOR (WHETHER BASED ON CONTRACT, TORT, PRODUCTS LIABILITY, STRICT OR STATUTORY LIABILITY, NEGLIGENCE OR OTHERWISE), ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL CONSEQUENTIAL, PUNITIVE, OR EXEMPLARY DAMAGES, (EVEN IF SELLER HAS BEEN ADVISED OF THE POSSIBLITY OF SUCH DAMAGES) ARISING OUT OF USE OF THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR ECONOMIC LOSS OF PROFITS OR SAVINGS; LOST WAGES; DAMAGES TO OR LOSS OF USE OF PROPERTY; BODILY INJURY; MEDICAL PAYMENTS; PAIN AND SUFFERING; AND LOSS OF CONSORTIUM. IN THE EVENT THAT APPLICABLE LAW DOES NOT ALLOW THE EXCLUSION OF WARRANTIES STATED HEREIN OR THE LIMITATION OF LIABILITY STATED HEREIN, THEN YOU EXPRESSLY AGREE THAT IN NO EVENT WILL THE LIABILITY OF THE SELLER, FOR ANY CLAIM OR DAMAGES HEREUNDER, EXCEED THE PURCHASE PRICE PAID FOR THE PRODUCT IN CONTROVERSY.

Price: 59.95 USD

Location: Lincoln, Arkansas

End Time: 2023-10-15T22:12:23.000Z

Shipping Cost: 14.95 USD