Superlift Suspension K1003 2.5" Front/1.5” Rear Leveling Lift Kit

Description: $429.99 This is the SUPERLIFT Level 1 2.5 inch lift kit with Superlift shocks for the 1997-2003 Ford F-150 4WD. This Leveling Kit will enhance the appearance of your Ford F-150 by leveling the front with the rear of your Ford F-150 pickup. Superlift's Level-It lift systems are the perfect solution for anyone wanting an economical and easy way to eliminate the factory nose-down rake on virtually all late-model trucks and SUVs. Whether it's simply leveling the truck's stance, making the room to go up a couple of tire sizes, or plus-sizing the tire and wheel package on the vehicle, Level-It components work with factory suspension components to achieve modest ride height gains Super-EZ install. The 1997-2003 Ford F-150 4WD is equipped with an Independent Front Suspension (IFS) with torsion bars. Front tires attach to steering knuckles. The knuckles pivot on ball joints attach to upper & lower control arms. The upper & lower control arms position the knuckles front-to-back & side-to-side. The ‘spring’ of the suspension is a torsion bar. The front of the torsion bar attaches to the lower control arm and rear attaches at a rear frame crossmember. This crossmember houses the adjuster or torsion keys. The torsion bars have a tremendous pre-load or ‘twist’ in them. The torsion bars are what determine the ride height of the suspension. These torsion bars have a certain amount of adjustment built into the factory system. Torsion bar keys have hex-cut (or splined) holes that mate to the rear ends of the torsion bars. This adjustment takes place via a bolt that indexes on a torsion key attached to each torsion bar. Simply ‘cranking up’ the factory system is not the right way to go about gaining minor amounts of lift due to a number of factors. SUPERLIFT Level-It keys are improved direct replacements for the 1997-2003 Ford F-150 4WD factory keys. Our Level-It keys are indexed differently to increase bar rotation and lift (the center hex where the torsion bar mounts are re-indexed or rotated). As the new keys are loaded, they apply torsional load to the bars which in turn lifts the vehicle greater than that of the stock torsion keys. Ours are also designed to grab the ‘flat’ hex portion of the torsion bar for a more precise, tighter fit. In stock This is the SUPERLIFT Level 1 2.5 inch lift kit with Superlift shocks for the 1997-2003 Ford F-150 4WD. This Leveling Kit will enhance the appearance of your Ford F-150 by leveling the front with the rear of your Ford F-150 pickup. Superlift's Level-It lift systems are the perfect solution for anyone wanting an economical and easy way to eliminate the factory nose-down rake on virtually all late-model trucks and SUVs. Whether it's simply leveling the truck's stance, making the room to go up a couple of tire sizes, or plus-sizing the tire and wheel package on the vehicle, Level-It components work with factory suspension components to achieve modest ride height gains Super-EZ install. The 1997-2003 Ford F-150 4WD is equipped with an Independent Front Suspension (IFS) with torsion bars. Front tires attach to steering knuckles. The knuckles pivot on ball joints attach to upper & lower control arms. The upper & lower control arms position the knuckles front-to-back & side-to-side. The ‘spring’ of the suspension is a torsion bar. The front of the torsion bar attaches to the lower control arm and rear attaches at a rear frame crossmember. This crossmember houses the adjuster or torsion keys. The torsion bars have a tremendous pre-load or ‘twist’ in them. The torsion bars are what determine the ride height of the suspension. These torsion bars have a certain amount of adjustment built into the factory system. Torsion bar keys have hex-cut (or splined) holes that mate to the rear ends of the torsion bars. This adjustment takes place via a bolt that indexes on a torsion key attached to each torsion bar. Simply ‘cranking up’ the factory system is not the right way to go about gaining minor amounts of lift due to a number of factors. SUPERLIFT Level-It keys are improved direct replacements for the 1997-2003 Ford F-150 4WD factory keys. Our Level-It keys are indexed differently to increase bar rotation and lift (the center hex where the torsion bar mounts are re-indexed or rotated). As the new keys are loaded, they apply torsional load to the bars which in turn lifts the vehicle greater than that of the stock torsion keys. Ours are also designed to grab the ‘flat’ hex portion of the torsion bar for a more precise, tighter fit. Shop by Category ... Kits Suspension Parts Stabilizers Shock Absorbers Skid Plates Lighting Accessories Kits Suspension Parts Stabilizers Shock Absorbers Skid Plates Lighting Accessories DON'T KNOW WHERE TO START? Contact us using eBay messages We will help you find the right lift kit for your Truck, Jeep or SUV. We install everything we sell!!! Superlift Suspension K1003 2.5" Front/1.5” Rear Leveling Lift KitDescriptionSuperlift Suspension K1003 2.5" Front/1.5” Rear Leveling Lift Kit This is the SUPERLIFT Level 1 2.5 inch lift kit with Superlift shocks for the 1997-2003 Ford F-150 4WD. This Leveling Kit will enhance the appearance of your Ford F-150 by leveling the front with the rear of your Ford F-150 pickup. Superlift's Level-It lift systems are the perfect solution for anyone wanting an economical and easy way to eliminate the factory nose-down rake on virtually all late-model trucks and SUVs. Whether it's simply leveling the truck's stance, making the room to go up a couple of tire sizes, or plus-sizing the tire and wheel package on the vehicle, Level-It components work with factory suspension components to achieve modest ride height gains Super-EZ install. The 1997-2003 Ford F-150 4WD is equipped with an Independent Front Suspension (IFS) with torsion bars. Front tires attach to steering knuckles. The knuckles pivot on ball joints attach to upper & lower control arms. The upper & lower control arms position the knuckles front-to-back & side-to-side. The ‘spring’ of the suspension is a torsion bar. The front of the torsion bar attaches to the lower control arm and rear attaches at a rear frame crossmember. This crossmember houses the adjuster or torsion keys. The torsion bars have a tremendous pre-load or ‘twist’ in them. The torsion bars are what determine the ride height of the suspension. These torsion bars have a certain amount of adjustment built into the factory system. Torsion bar keys have hex-cut (or splined) holes that mate to the rear ends of the torsion bars. This adjustment takes place via a bolt that indexes on a torsion key attached to each torsion bar. Simply ‘cranking up’ the factory system is not the right way to go about gaining minor amounts of lift due to a number of factors. SUPERLIFT Level-It keys are improved direct replacements for the 1997-2003 Ford F-150 4WD factory keys. Our Level-It keys are indexed differently to increase bar rotation and lift (the center hex where the torsion bar mounts are re-indexed or rotated). As the new keys are loaded, they apply torsional load to the bars which in turn lifts the vehicle greater than that of the stock torsion keys. Ours are also designed to grab the ‘flat’ hex portion of the torsion bar for a more precise, tighter fit.Features SUPERLIFT’S heavy-duty forged-steel construction torsion keys are 25% stronger than OEM keys. Provided 1.5 inches to 2.5 inches of adjustable lift height. Hardware is supplied to prevent ‘over-cranking’ the torsion bars. Ideal for restoring height lost from the heavy front bumper, winch/bumper combo or snow plow. Included in this system is a set of four (4) Superlift hydraulic shocks absorbers. Superlift shock absorbers are designed to provide excellent ride quality, durability, and longevity. They feature 10-stage, velocity-sensitive valving for maximum control on or off-road without sacrificing a comfortable ride. Shock resistance is continually adjusted, depending on the terrain and vehicle speed. Front: Torsion keys (2); supplied hardware (2); Superlift Shocks (2). Rear: Rear block kit; cast steel blocks (2); U-bolts (4); heavy-duty flat washers (8); U-bolt long nuts; Superlift Shocks (2). Components Torsion keys, front and rear shocks, rear 1.5” block and U-bolt kit. Fitment Years Drive Make Model 1997-2003 4WD Ford F-150 Installation time: 3 hours Difficulty level: 2 of 5 Special torsion bar puller tool is required to load/unload torsion bars. The puller tool is available for purchase or rental from most major automotive part stores. This is a Level 1 Lift kit that includes torsion keys for the 1999-2003 Ford F-150 4wd pick-up; providing 1.5” to 2.5” of adjustable front lift height Includes 1.5” rear lift, front and rear shock absorbers Covered by our Limited Lifetime Warranty ATTENTION STATE OF CALIFORNIA CONSUMERS WARNING: Cancer and reproductive harm – www.p65warnings.ca.gov Please note: We are a "Ma/Pa" brick & mortar suspension shop currently accepting Paypal, cash in person and all major credit cards by phone. If you have questions or need technical support, upgrades or accessories we can be reached most times through eBay. **SHIPPING TO , AND REQUIRE ADDITIONAL SHIPPING. Get in touch with us using eBay messages for a shipping quote We accept Paypal or connect with us through eBay for alternate payment methods

Price: 429.99 USD

Location: West Monroe, Louisiana

End Time: 2025-01-10T09:18:53.000Z

Shipping Cost: 0 USD