T-type Thermocouple Wire AWG 24 Solid Wire w. PVC Insulation Extension 1 yard

Description: Standard Solid T-type Thermocouple Wire with PVC Insulation - 1 yard or multiples of 1 yard - This is a T-type thermocouple wire with blue PVC insulation, which is good up to about 105 C or 221 F. This T-type thermocouple wire can be used to make your own thermocouples for a wide range of applications, or to make your own extension wire. T-type thermocouples are frequently used to measure cold and ultra cold temperatures in cryogenic application. This T-type thermocoule wire can measure the temperature of liquid nitrogen, dry ice and other cooling fluids used in cryogenics. The copper constantan wire is made to standard T-type thermocouple specifications. This is a a solid wire and therefore especially useful for T-type thermocouples, but also can be used for extension wires. It is sold in 1 yard increments, so if you order 10 units of this, you will receive a single 10 yard long wire. This wire can be used to make extension wires, in this case it can transmit temperature signals up to 750 °F (400 °C). The wire insulation just should not be exposed to temperatures higher than about 220 °F (105 °C), because the PVC will start to soften and melt. You would use a T-type thermocouple with fiberglass, FEP or stainless steel insulation in the hot zone and run that to a colder spot, and from there transmit the signal using the wire with PVC insulation. Specification T-type Thermocouple wire for making thermocouples or extension wire Measurement range: -328 °F to 220 °F (-210 °C to 105 °C)Copper / Constantan type T thermocouple wire with Standard Accuracy (whichever is greater): +/- 1.0C or +/- .75% Solid wire, AWG 24 (0.51 mm) ANSI color coded PVC insulation, blue = + (positive), red = - (negative) Sold in 1 yard increments, 1 unit = 1 yard, order 10 units and you receive a 10 yard wire

Price: 2.29 USD

Location: Saint Paul, Minnesota

End Time: 2024-03-28T15:39:23.000Z

Shipping Cost: 6.99 USD