Taidacent 2 Channel Car Door Switch Relay Board Biometric Fingerprint Reader ...

Description: Note The dual-circuit relay control board is more suitable for controlling the switch of the car door or the ignition of the car. The control car door can be connected to the remote control of the car for non-destructive installation, or it can be connected to the central control of the car. Basic operation 1. Press the button to restore factory settings: When the board is powered on, keep pressing the "setting key" on the circuit board for more than 10S, you can see that the red indicator light on the circuit board lights up and the fingerprint module starts to light up in white. At this time, release the "setting key" and fingerprint If the green light is always on for 1S, it means the deletion is successful; if the fingerprint is always on for 1S, it means the deletion has failed. After restoring the factory state, the system will clear all fingerprint libraries. At this time, the system is in demonstration mode, and any fingerprint can control the relay to open. 2. Recording the fingerprints of the administrator for the first time: [Max number of administrators is 10] When the system is in the factory state, press any finger on the fingerprint window and hold it for about 5S without letting go. The yellow light of the fingerprint will light up. After the finger is removed, the yellow light will flash, and the operation of adding the administrator fingerprint will be entered. Start pressing the finger, the light blue light will turn on when the finger is pressed, the yellow light will flash when the finger is lifted, press the finger 4 to 6 times continuously, the green light will be on for about 3S, the new fingerprint entry is successful; if the red light is on, it means entry fail. The yellow light continues to flash, you can continue to enter other fingerprints, if you need to end the entry, about 5S without any operation will automatically exit. 1. Control board wide voltage input, DC4.7V-DC15V are compatible (+ is positive,-is negative); control board size is 48*29*15mm in length, width and height. Low power consumption standby current 100ua, suitable for long-term battery operation. 2. The fingerprint module comes standard with a capacity of 50 fingerprints. The recorded fingerprint information and the set jog time, relay mode, etc. will not be lost after power off. 3. Suitable for DIY users to modify, used in access control, automobile control, electrical control, industrial control and other occasions. 4. You can delete all ordinary user fingerprints or ordinary user fingerprints with a designated number; you can also restore the factory settings of fingerprints with one key. 5. The relay self-locking mode and jog mode can be freely selected. In jog mode, the time of relay control can be adjusted freely.

Price: 91.64 USD

Location: Brentwood, New York

End Time: 2025-01-10T09:03:41.000Z

Shipping Cost: 0 USD