TAMA HP910LZB [Speed Cobra 910 Single Pedal]

Description: ■■■Product■■■TAMA HP910LZB [Speed Cobra 910 Single Pedal] 【condition】: NEW Description of itemThe SPEED COBRA pedal, which uses a long footboard and was made for speed-oriented players, has evolved further. SPEED COBRA's concept of ``balancing speed and power'' includes the Swivel Spring Tight, a new mechanism that more smoothly converts stepping force into circular motion of the cam, and the newly designed Accu-Strike Cobra Beater, which produces a sound with an emphasis on attack. We have taken this further.

●Long FootboardA footboard exclusively for Speed Cobra that is approximately 10% longer in total length than the Iron Cobra pedal. By stepping on the heel side, which has less vertical movement with the same force, you can increase your ability to respond to fast passages. In addition, we have adopted a setup called Recessed Setting to achieve light stepping while maintaining a natural action. By setting the starting point of the footboard back to the point where it feels comfortable and ``light'', we have realized the ability to step on the foot with light force. ●Recessed Setting (US PAT.NO.8269089)To maintain speedy play, a lighter pedal feel is required. By adopting a chain type system, Speed Cobra maintains the traditional natural action while paying special attention to the positional relationship between the cam and chain in order to achieve light pedaling. The force with which the beater hits the bass drum head is primarily generated from the force of stepping on the footboard (F1). By applying the physical theorem that the greater the angle θ between the force F1 of stepping on the footboard and the force F2 pulled by the chain, the less force F1 is required to step on the footboard, we have achieved a "lightness" that does not feel strange. Set up the footboard starting point back to the point where it is obtained. ●Accu-Strike Cobra BeaterA new beater equipped with a new material in the head part, developed to bring out the maximum potential of Speed Cobra pedals. The BR (butadiene) resin used for the surface that hits the bass drum is characterized by moderate hardness and excellent wear resistance. Accu-Strike Beater, which uses this technology, allows for a uniform and effective sound even when hitting repeatedly at high speed. In addition, control performance has been improved by reviewing the balance between the distance from the tip of the beater head to the end and the shaft position. We succeeded in achieving a solid sound that does not become blurred even at low volumes. ●Minimizing Power LossSpeed Cobra pedals feature bearings in each drive section for smooth, stable movement. Both ends of the shaft are equipped with ultra-precision bearings, which are used in computer hard disk drives and automobile ABS devices, to provide smooth and stable action. The high-precision ball bearing installed at the connection between the spring and shaft converts the force of stepping on the footboard into rotational energy of the cam, achieving smooth pedal work. Furthermore, the Oiles bearing used in the hinge part shuts out unpleasant lateral vibration of the footboard. ●Rolling Glide Lite SprocketThe cam (sprocket), which has a large effect on pedal action, uses a perfectly circular cam that pursues a balance between durability and weight reduction. By reducing the force required for rotational movement, a light stepping feeling is achieved. ●Super Stabilizer DesignThe width of the frame, which supports the shaft that drives the cam and beater and can be called the skeleton of the pedal, has been increased by approximately 15mm, and the width of the underplate that supports the entire pedal has been expanded by approximately 12mm compared to the previous model. By greatly improving stability, you can obtain uniform action without shaking even with intense pedal work. ●Swivel Spring Tight (US.PAT.NO.9236038)A new mechanism devised to maximize the effectiveness of the spring. The shaft that fixes the lower end of the spring rotates with the movement of the pedals, so the spring always expands and contracts vertically without being distorted even during intense movements. This converts the elastic energy stored in the spring into energy that moves the pedals without loss. Furthermore, by reducing the friction applied to the connection part with the spring, we have achieved ideal pedal work that allows you to press down lightly and return quickly. ●Hinge Guard BlockThe method of fixing the bearings at both ends of the hinge shaft has been changed from the conventional method of penetrating them from the side of the footboard to a method of holding the bearings between the top and bottom. By dispersing the force applied to the bearing when stepping on the pedal, the load applied to the hinge shaft itself is reduced. It is now possible to rotate with higher precision than the previous model, achieving unprecedented smooth operability. ●Oiles Bearing HingeThe hinge, which serves as the fulcrum of the footboard, uses Oiles bearings made of Bell Brass mesh coated with Teflon resin. He shuts out the unpleasant lateral vibration of the footboard and provides smooth pedal work. ●Speedo-RingHigh-precision ball bearings are installed at the connection between the spring and shaft. This bearing converts the elastic energy generated in the spring by stepping on the footboard into rotational energy for the cam. Furthermore, since it precisely follows the movement of the spring, it also realizes a smooth movement in which the movement of the foot and the footboard seem to be linked. ●Vari-Pitch Beater HolderBeater/footboard angle adjustment function in combination with Speedo-Ring. The distance from which the beater hits the bass drum head can be adjusted steplessly without affecting the angle of the footboard. ●Para-Clamp II ProTAMA's original clamp has been updated to securely hold bass drum hoops of various thicknesses. By attaching rubber to the tip that secures the bass drum hoop, it increases grip strength and exerts strong fixing power while suppressing damage to the hoop. In addition, the tip of the pedal has a structure that moves in three dimensions, so even if the front side of the bass drum is set up extremely high, the tip will fit according to the angle and stabilize the pedal. What's more, the T-bolts that are tightened to secure the footboard can be operated from the side of the footboard, so you can attach and detach the pedals while sitting on the throne. ●Cobra Coil (US. PAT.NO.7408104)By touching the back of the footboard just before stepping down, the Cobra Coil assists in the return of the footboard without affecting the stepping. The spring part can be moved back and forth, and by finely adjusting the starting position, you can change the degree of bounce of the footboard. Accessories: Soft carrying bag (PBP100) ■■■About Shipping■■■We will carefully deliver using the packing material. In now ,shipping method is only Fedex.Due to the effects of infectious diseases, cheap flights such as SAL have been suspended all over the world.At the same time, the shipping cost of international courier services has also been increased.The shipping cost is high, but please understand the situation. ■■■Shipping Duration■■■ [Fedex]2-7buisiness day In now ,shipping method is only Fedex. ■■■Payment■■■You can choose the payment method.Paypal, credit card, Google Pay, etc. We ship the item from Japan . We usually ship the item within 5 business days of receiving payment. We accept return the only case of unopened item package. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer’s responsibility. ■■■International Buyers Please Note ■■■Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.

Price: 255 USD

Location: Isehara

End Time: 2024-03-03T02:14:20.000Z

Shipping Cost: 60 USD