TARAMPS - HD 3000 - 2ohms - 3000Watts - 1 Channel Eletronic Car Audio Amplifiers

Description: Experience high-quality audio with the TARAMPS HD 3000 car audio amplifier. This powerful 3000W mono channel amplifier is perfect for enhancing your car's sound system. Made in Brazil, this amplifier boasts a sleek design and advanced features. With TARAMPS HD 3000, you can enjoy crystal-clear sound quality and powerful bass. This amplifier is perfect for those who want to upgrade their car's audio experience. Don't miss out on this amazing opportunity to enhance your driving experience with high-quality audio. DescriptionHD 3000 2 ohms, a 3000 watt full range amplifier with the tradition and quality of one of Taramps' most renowned lines. Available in 1, 2 and 4 ohm versions, it is perfect for those looking for power, modern design and versatility. Its wide frequency response (10Hz ~ 20KHz) allows it to be used with speakers of the most varied models, such as subwoofers, woofers, mid-bass, mid-range, drivers, phenolic drivers, titanium drivers, super tweeters, etc. It has an integrated crossover (hpf, lpf, full) that configures the amplifier's operating mode. Bass boost button that reinforces the sub-bass at 50Hz, with variable amplitude from 0 to +10.5dB. Gain adjustment that allows adjustment to the output signal levels of practically all models of CD/DVD players on the market. Indicator LEDs: on, clip and protection. Due to its diversity, it can be installed in cars, vans, pickups, SUVs to amplify internal sound, such as trunk sound or the famous trio speakers, among other automotive projects such as use in sound walls, trios in Goiás, open trunk sound, bob speakers, residential speakers, etc. All this and much more to make your sound system more powerful with the quality you deserve. Technical specifications: • Operating class: class d.This is the construction indication of an amplifier, class d (also called digital) due to the pwm (pulse width modulation) used in its operation, allows for a small, efficient amplifier with reduced heating compared to other construction classes. • Number of channels: 01.Number of channels for use in your project, with this specific model you have the option of connecting only 1 channel. • Power @12.6v – 2 ohms: 3000 watts rms.The power with a voltage of 12.6v volts is related to the operation of the vehicle/power supply.• Power @12.6v – 4 ohms: 2025 watts rms.The power with a voltage of 12.6v volts is related to the operation of the vehicle/power supply.• Power @12.6v – 8 ohms: 1140w rms.The power with a voltage of 12.6v volts is related to the operation of the vehicle/power supply. • Minimum output impedance: 2 ohms.Association with the result of speakers, where, for example, we can connect two 4-ohm speakers or four 8-ohm speakers to the channel for this result. • Minimum output impedance: 4 ohms. Association with the speaker result, where, for example, we can connect two 8-ohm speakers to the channel or just one 4-ohm speaker for this result. • Minimum output impedance: 8 ohms.Association with the speaker result, where, for example, we can connect only one 8-ohm speaker to the channel for this result. • Minimum input sensitivity: 230mv.Lowest voltage required for maximum results with the amplifier, that is, with low radio volume, we will already achieve good results. • Frequency response: 10hz ~ 20khz (-3db).With the frequency response it is possible to identify the application of the amplifier, so if the speaker or any other type of transducer you are using is included within this response, it means that we can use this product in your project. • Variable low pass crossover (lpf): 80hz ~ full.LPF or low pass filter (English term) means low pass filter, that is, it allows everything below this reference to be reproduced and everything above this indication will not be used. A common use of this function is to reduce the presence of voice in subwoofers. • Variable high pass crossover (hpf): 10hz ~ 80hz.Hpf or high pass filter (English term), means high pass filter, that is, it allows everything above this reference to be reproduced. The common use of this function is to reduce the presence of bass in door speakers, for example. • Bass boost: 0 ~ 10.5db (50hz).Bass boost is the reinforcement of bass for the amplifier's sub channel, that is, an "extra" reinforcement for bass. • Power supply voltage: 9 to 16v.This is the indication of the amplifier's operation where it will have the minimum and maximum voltage for its operation. Outside this specification it will not turn on or activate a protection. • Power consumption at rest: 1.7A.This is the reference for the amplifier's power consumption when turned on and without music. • Maximum music power consumption: @12.6VDC: 143.5A.This is the estimated power consumption of the amplifier working at minimum impedance while playing music at maximum volume. • Maximum power consumption in sinusoidal signal: @12.6VDC: 287A.Reference for bench/laboratory tests under specific conditions with resistive load, fixed frequency and stable power supply. • Protection system: short circuit at output/high/low supply voltage/thermal protection.This system exists to protect the amplifier's operation; it may be related to the output, when we have connections below the minimum impedance, a short circuit in the installation or even high-voltage speakers with problems.This protection may also occur due to voltages outside the operating range, or even thermal protection that occurs due to conditions in which the amplifier heats up above normal. • Dimensions: width 22.9cm x height 6.5cm x depth 18.6cm.Extreme dimensions of the product.• Weight: 2.5kg.Gross weight of the amplifier. Package contents:• 1 HD 3000 2 ohm amplifier module;• 1 Clip M1 LED monitor;• QR code to download the manual;• 1 Taramps sticker.

Price: 199 USD

Location: sao paulo, sao paulo

End Time: 2024-12-14T20:36:03.000Z

Shipping Cost: 0 USD