TARAMPS MD 3000.1 4ohms - 1 Channel 3000Watts - Eletronics Car Audio Amplifier

Description: DescriptionThe MD 3000.1 4-ohm amplifier module was carefully developed with the latest technology, offering high output and performance for a wide range of automotive sound systems. Available in 1.2 and 4-ohm versions, it is perfect for those looking for power, modern design and versatility. Its wide frequency response (10Hz ~ 18KHz) allows it to be used with speakers of a wide range of models, such as subwoofers, woofers, mid-bass, mid-range, drivers, phenolic drivers, titanium drivers, super tweeters, etc. It has an integrated crossover (hpf, lpf, full) that configures the amplifier's operating mode. Bass boost button that reinforces sub-bass at 55Hz, with variable amplitude from 0 to +10dB. LED indicators: on, clip and protection. Due to its diversity, it can be installed in cars, vans, pickup trucks, SUVs to amplify internal sound, such as trunk sound or the famous trio speakers, among other automotive projects such as use in sound walls, trios goiano, open trunk sound, bob speakers, residential speakers, etc. All this and much more to make your sound system more powerful with the quality you deserve. Technical specifications: • Operating class: class d.This is the construction indication of an amplifier, class d (also called digital) due to the pwm (pulse width modulation) used in its operation, allows for a small, efficient amplifier with reduced heating compared to other construction classes. • Number of channels: 01.Number of channels for use in your project, with this specific model, you have the option of connecting only 1 channel. • Power @12.6v – 4 ohms: 3000 watts rms. The power, with a voltage of 12.6v volts, is related to the operation of the vehicle/power supply. • Power @12.6v – 8 ohms: 1920w rms. The power, with a voltage of 12.6v volts, is related to the operation of the vehicle/power supply. • Minimum output impedance: 4 ohms. Association with the speaker result, where, for example, we can connect two 8-ohm speakers to the channel or just one 4-ohm speaker for this result. • Minimum output impedance: 8 ohms. Association with the speaker result, where, for example, we can connect only one 8-ohm speaker to the channel for this result. • Minimum input sensitivity: 220mv.Lower voltage required for maximum results with the amplifier, i.e., with low radio volume, we will already be able to obtain good results. • Frequency response: 10Hz ~ 18KHz (-3dB).With the frequency response, it is possible to identify the application of the amplifier, as well as whether the speaker or any other type of transducer that is being used is included within this response, meaning that we can use this product in your project. • Variable low pass crossover (LPF): 90Hz ~ 18KHz.LPF or low pass filter (English term) means low pass filter, i.e., it allows everything below this reference to be reproduced and anything above this indication will not be used. A common use of this function is to reduce the presence of voice in subwoofers. • Variable high pass crossover (HPF): 10Hz ~ 90Hz.HPF or high pass filter (English term), means high pass filter, i.e., it allows everything above this reference to be reproduced. The common use of this function is to reduce the bass presence in door speakers, for example. • Bass boost: frequency: 35hz ~ 55hz (boost: 0 ~ 10db (50hz).Bass boost is the bass boost for the amplifier's sub channel, that is, an "extra" boost for the bass. • Power supply voltage: 9 to 16v.This is the indication of the amplifier's operating conditions where it will have the minimum and maximum voltage for its operation. Outside this specification, it will not turn on or activate a protection. • Consumption at rest: 1.2a.This is the reference for the amplifier's consumption when turned on and without music. • Maximum musical consumption: @12.6vdc: 138.8a.This is the estimated consumption of the amplifier working at minimum impedance, playing music at maximum volume. • Maximum consumption in sinusoidal signal: @12.6vdc: 277.7a.Reference for bench/laboratory tests under specific conditions with resistive load, fixed frequency and power supply stable. • Protection system: short circuit at the output, short circuit at the output in relation to GND, low impedance protection, high/low voltage protection and thermal protection.This system exists to protect the operation of the amplifier, it may be related to the output, when we have connections below the minimum impedance, a short circuit in the installation or even speakers with problems.This protection may also occur due to voltages outside the operating range, or even thermal protection that occurs due to conditions in which the amplifier has above-normal heating. • Dimensions: width 22.8cm x height 7cm x depth 21.8cm.Extreme dimensions of the product.• Weight: 2.5kg.WARNING: Shipping: Shipment of the product in 1 to 4 business days, shipments are by UPS or Fedex, as soon as the contracted service picks up the product, the tracking number is given to you. Please do on ebay. If UPS or Fedex cannot find the buyer at home and the product is returned, we will not refund the shipping cost, we will deduct a 20% fee from the product value for store administrative costs. Stay tuned for tracking number updates not charge tracking number if you purchased on Friday night, Saturday and Sunday, we ship products during business hours. Please check your shipping address if it is correct on Ebay, we are not responsible for incorrect addresses, you are responsible for the address you write We are not responsible for the customs fees charged by your country, each country has its own law, please study the laws before purchase. Orders outside the United States For buyers located outside of the United States, additional fees and taxes may be collected at your destination in accordance with your country's rules. For more information, consult FEDEX and UPS carriers or CUSTOMS in your country before purchasing. WE ARE NOT RESPONSIBLE FOR CUSTOMS FEES CHARGED BY YOUR COUNTRY

Price: 254.01 USD

Location: sao paulo

End Time: 2025-01-04T14:22:23.000Z

Shipping Cost: 0 USD