Tiny Tail 2Ch RC Radio Control Glider Air Plane Kit Free Flight Bungee Launch

Description: Tiny Tail RC Electric Glider – Slope Glider – Free Flight Glider Laser Cut Contest Balsa Wood with Carbon Fiber The TinyTail boasts wings and wingtips meticulously crafted to adjust subtly to airflow, optimizing lift and countering gravity for optimal aerodynamic performance. With its generous wing area and reflexed wings and wingtips resembling those of red-tailed hawks, the TinyTail enhances laminar flow on its wing surface, minimizing drag for smooth and extended thermal glides. The carefully engineered washout wingtips help mitigate turbulence during flight, reducing air resistance and enhancing efficiency. TinyTail as the name suggests, has a very small lightweight and aerodynamic tail design reducing drag for optimal glide ratio. With a gentle push throw, the TinyTail has the ability to glide effortlessly for many many yards. With the included bungee launching system, this Tiny Tail can be launched into the stratosphere hundreds of feet, providing the pilot an ample amount of time in the air to catch thermals and soar like an eagle. Tiny Tail variants Your Tiny Tail can be built in two different variants. RC version and a free flight version. RC version offers a 2Ch glider using 2 micro servos, one micro receiver and a 150mah lipo battery for power. The RC version will require a radio transmitter system. ( our receivers are Spektrum radio compatible ) If you wish to build your Tiny Tail as a stand alone free flight version with no electronics, this will be your choice. The free flight version is half the weight and glides endlessly with a simple push throw. If you find playing Frisbee with your friends enjoyable, just wait until you experience playing catch with the Tiny Tail Free Flight Glider. Engaging in a game of catch is not only fun but also promotes trust, empathy, curiosity, communication, the creation of meaningful memories, and helps keep us grounded in the present. Check out the video flight sample below for a preview. Wing covering method You may cover the top 1/3rd of the leading edge with the provided lamination film as this will be mainly for ascetics. You may also omit the top lamination film and simply cover the entire top of the wings with the provided balsa sheeting. Again covering the top of the wing with film is optional and not required for this build. To cover the top 1/3rd of the leading edge of your wings, a heat iron can be used. Mini heat irons work best with variable heat adjustment. Few brand names to choose from that may be purchased from ebay or amazon are: Clover Mini iron ii, Mini plancha para patch, Mini-Bügeleisen MB-3415, Ming Yang sealing tool Large heat iron/sealing iron will work as well, make sure to use low heat. Both irons must have cloth sock on head to prevent iron from sticking to lamination film. Regular cotton sock can be used. To cover the bottom of the wings, light weight colored tissue paperis used and included in your kit. While one might assume that constructing model airplanes is a challenging task, the reality is that building them is quite straightforward, especially with the help of our step-by-step video build guide. The building process only requires a few basic materials (sandpaper, glue, pliers, patience, etc.), and with just a few hours of dedication, you can become proficient at constructing your own TIny Tail Glider.Diving into building your TIny Tail can be an incredibly enjoyable and straightforward experience, especially if you've never constructed an airplane before. This is largely thanks to the step-by-step HD video build guide included with your kit. If you're adept at following instructions, this build is bound to be thoroughly enjoyable for you. You can see different videos of the Tiny Tail in flight down below. Copy and paste the youtube link in your browser. Kit Contents contest grade ultralight precision laser cut airfoil ribs/fuselage/ tail feathers/control horns, laser cut birch support brace, carbon fiber reinforcements, tissue paper for covering wings, shrink tubing, 4x guide rod tubes, 2x carbon push rods, Z bends, fuselage(pod), Lead weights, mini brush, connector wires, glass hinge, all necessary accessories. This version does NOT include battery, receiver, servos and bungee launch syste. This version is ONLY to build as a free flight Tiny Tail. Either contact me for electronics or see my other auctions for the full kit that will include everything. Battery : 150mAh 1s Lipo NOT Included Micro 2.4GHz 4 Channel DSMX Not included 2x 1.9 gram micro servos NOT Included Bungee Launch System Specifications Weight: 45-55 grams Wing span: 25” inches (635 mm) Wing area: 137.5 sq.in Wing loading: 2.08 oz/sq.ft Control : 2ch elevon mixing Battery : 150 mAh 1s Receiver : 2 gram micro DXMx Assembly : Easy ( step by step HD video build guide ) Skill Level : Hobby Enthusiasts Wind: 0-10 mph Tools needed to complete 1. Thin CA glue 2. gorilla glue White version OR foamtack 3. masking tape 4. Sand paper 5. Scissors 6. Xacto blade 7. Heat iron ( optional ) 8. Scotch tape 9. pliers 10. Ruler 11. Glue Stick ( tissue covering wings ) 11. One free afternoon :) Colors are a lot more vibrant in person Ultralight decal sticker colors: black, blue, dark green, florescent green, florescent pink, florescent orange, Ferrari yellow Tissue Covering Colors: white, florescent green, black, florescent pink, yellow, florescent orange You will receiver one color of each sticker decals and tissue. Tissue will be used to cover the bottom of the wings, while ultralight sticker decal will be used for the top center of the wings. I will ship random colors unless you email me and let me know what color combination you would like. Email me if you have questions on choosing the right receiver servos and electronics. Flight videos of the Tiny Tail below. Please copy and paste the links below in your browser to watch. https://youtu.be/tZgsz1oQnvs https://youtu.be/S-yPlxmjkyM https://youtu.be/EUqipN9bxVU https://youtu.be/TnS5M7sL_oY https://youtu.be/sUOVTiB1_1c https://vimeo.com/901354624 Payment Method: I accept payment via Paypal, Visa, Mastercard, and all major credit cards. Shipping Detail: All orders will be processed within 2 days of payment. I ship all my gliders on time. USA shipping fee = $6.89 International fee = $19.00 I do not make any money on shipping, shipping fees are standard for USPS Return Policy: If you are not happy with your item, you may return it for a full refund on the price of the product. This must be done within 7 days of the purchase arriving and the product must be in new condition with original packaging and all included accessories. Returning Shipping Cost will be paid by buyer. Contact : Please feel free to contact me if you have any other questions about the item. I will respond within 1 working day.

Price: 86 USD

Location: Glendale, California

End Time: 2024-08-21T21:46:07.000Z

Shipping Cost: N/A USD