Harajuku Lovers

Totalboat Totalprotect Epoxy Barrier Coat System White, Quart

Description: Totalboat Totalprotect Epoxy Barrier Coat System White, Quart Fast Shipping! Product Description: High-build two part epoxy primer and barrier coat for use above and below the waterlineExcellent for gelcoat blister prevention and repair work on fiberglass boatsProvides superior protection on all underwater metalsEasy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat.Available in White or Gray in Quart or Gallon sizes. Coverage: 225 sq. ft. per gallon (at 7 mils wet). Thinner: TotalBoat Epoxy Primer Thinner 200. Product Description Total Protection for Gelcoat, Fiberglass and Metals TotalBoat TotalProtect Epoxy Barrier Coat and Primer forms a waterproof barrier to protect against osmotic blistering - above and below the waterline. For best results, thin with TotalBoat Epoxy Primer Thinner 200. If rolling, use a 3/16" nap or foam solvent-safe roller cover. TotalProtect Epoxy Barrier Coat System Kits Provide Greater Value for the Same High-Quality Barrier Coat Performance as More Expensive Marine Epoxy Primers. High-Build, Flexible Epoxy Barrier Coat Prevents Water Absorption and Migration from Causing Costly Damage to Fiberglass/Gelcoat Hulls, Keels, Props, and Other Underwater Metals. A barrier coat is recommended on fiberglass boats as a watertight primer applied before application of bottom paint. TotalBoat TotalProtect is a heavy-duty, epoxy-based barrier coat and primer preferred by professionals to prevent water intrusion from creating blisters in gelcoat & fiberglass. It also acts as a tie-coat to help any coatings applied over it adhere as strongly as possible. And it protects underwater metals from damage. Compatible with all paints. For maximum adhesion, recoat or overcoat when the surface is thumbprint tacky. Overcoating times vary based on temperature & humidity. The "thumbprint test" lets you know when to begin overcoating. For this simple test, press your thumb gently into the primer. If you leave a thumbprint, but don't see paint on your thumb, TotalProtect is ready to overcoat. To begin, apply the first coat of TotalProtect. After 45 minutes, do the thumbprint test. If not ready, check again every 15 minutes. The Number of Coats Needed Depends on How You Apply TotalProtect. To Create a Watertight Barrier, it Takes a Minimum of 10 Mils Dry Film Thickness (DFT). Beware of competing products claiming to create an effective barrier coat with just 2 coats, as all application methods do not lay down the barrier coat at the same mil thickness per coat. Sprayer type, brush type, & roller cover thickness all make a difference in mil thickness per coat. Regardless of application method 8-12 mils DFT is key. Easy to Apply by Brushing, Rolling, or Spraying APPLICATION: Use a brush (natural bristle), roller (3/16" nap or foam solvent-safe cover is best) or spray (airless, conventional, or HVLP). Mil thickness/number of coats for rolling depends on the roller cover: 4-5 coats (3/16" roller) - BEST3-4 coats (1/4" roller)2-3 coats (3/8" roller) THINNING: TotalProtect is thick & typically needs thinning. Use TotalBoat Epoxy Primer Thinner 200 only. TotalProtect Epoxy Barrier Coat System Features Compare to Interlux InterProtect 2000 & HS, Pettit Protect, and Sea Hawk Tuff Stuff Universal, epoxy barrier coat and no-sand primer features high film build for maximum protection Great for preventing or repairing gelcoat blister damage; protects metals Excellent adhesion to properly prepared fiberglass, steel, stainless steel, lead, bronze, cast iron Easy to mix at a 3:1 ratio by volume; easy to apply by brushing, rolling, or spraying Comes in White and Gray colors, ideal for alternating coats to indicate where you've already primed Quart Kit: (3/4 qt. Base + 1/2 pt. Activator) Gallon Kit: (3/4 gal. Base + 1 qt. Activator) TotalBoat TotalProtect Epoxy Barrier Coat System Protects Metals Prevents Osmotic Blistering Creates a Stable Surface for Coatings Customer Reviews — 4.5 out of 5 stars 200 4.3 out of 5 stars 59 — Uses for TotalBoat primers Universal high-build epoxy primer & barrier coat. Use as a water-tight barrier coat to protect aluminum hulls & pontoons from corrosion, fill small imperfections & ensure a solid foundation for bottom paints or 1 & 2-part topside finishes. Provides excellent finish adhesion & corrosion protection on fiberglass, steel, wood & aluminum. Premium marine undercoat compatible with one-and two-part topside finishes. Resin Type / Mix Ratio / Induction time Epoxy resin / 3:1 mix ratio / Induct for 20 minutes prior to reduction and application. Epoxy resin / 3:1 mix ratio / Induct for 20 minutes prior to reduction and application. Epoxy resin / 1:1 mix ratio / Induct 30 minutes before reduction or application. Phenolic modified short oil alkyd resin (no mix ratio, no induction period. Compatible Substrates Fiberglass, metals, wood, previously painted surfaces in good condition (not 1-part paints) Aluminum, metals, fiberglass, previously painted surfaces in good condition (epoxy products only) 2-Part High Build & Surfacing Epoxy Primers: Fiberglass, wood, aluminum, steel, and previously painted surfaces in good condition. 2-Part Clear Epoxy Primer: Fiberglass, carbon fiber, Kevlar, and previously painted surfaces in good condition. Fiberglass, wood, and previously painted surfaces in good condition. Application Temperature / RH 50-95°F / 0-85% RH 50-95°F / 0-85% RH 45-125°F 50-90°F / 0-90% RH Application Methods Brush, roll, or spray. For best results when rolling, use a 3/16" nap or foam solvent-safe roller cover. Brush, roll, or spray. For best results when rolling, use a 3/16" nap or foam solvent-safe roller cover. Brush, roll, or spray Brush, roll, or spray Thinner / Reducer TotalBoat Epoxy Primer Thinner 200. TotalProtect is thick & typically needs thinning. Use TotalBoat Epoxy Primer Thinner 200 only. TotalBoat Epoxy Primer Thinner 200 TotalBoat 2-Part Epoxy Primer Reducer Brush/Roll Application: TotalBoat Special Brushing Thinner 100. Spray Application: Xylene Recommended Number of Coats 2-3 (minimum), using a 3/8" roller; 3-4, using a 1/4" roller; 4-5, using a 3/16" roller. It's more important to ensure 8-12 mils of dry film thickness than number of coats. More than 3 coats may be required based upon the application thickness. 4-5 1-3 1-2 Overcoat With... TotalBoat TotalProtect or TotalBoat Bottom Paints, including Krypton, JD Select, and Spartan. TotalBoat Aluminum Boat Barrier Coat, TotalBoat AlumiPaint AF Bottom Paint, or TotalBoat Outdrive AF 2-part polyurethane topcoats. Polyurethane or enamel topside paints, such as TotalBoat Wet Edge Topside Paint and TotalBoat TotalTread. Colors / Sizes / Coverage White, Gray / *Quart Kit (3/4 qt. Base + 1/2 pt. Activator), *Gallon Kit (3/4 gal. Base + 1 qt. Activator) / Yield: 225 sq. ft. (at 7 mils wet, not accounting for waste). Gray / *Quart Kit (3/4 qt. Base + 1/2 pt. Activator), *Gallon Kit (3/4 gal. Base + 1 qt. Activator) / Yield: 400 sq. ft./gal. @ 2 mils dry (not accounting for waste). *Containers will not come filled completely. White, Gray, Clear / Quart Kit, Gallon Kit / Surfacing Primer: 400 sq. ft./gallon @ 2 mils dry; High-Build Primer: 75-100 sq. ft./gallon @ 3 mils dry; Clear Primer: 175-200 sq. ft./gallon @ 3 mils dry White, Gray / Quart, Gallon / 250-300 sq. ft./gallon Above / Below Waterline Use above and below the waterline. Use above and below the waterline. Use above and below the waterline. Use above the waterline only. It all started simply enough. As boaters, we wanted better stuff for our own boats. Even our favorite products, the ones we'd come to rely on, had room for improvement. It'd be nice if they could hold up longer, cure faster, coat better, apply easier, and—since we all know boat ownership creates a mini maelstrom in your pocket—cost less. Created from years of extensive boat knowledge working with local builders, makers, and DIY-ers, our innovative marine-grade products are used in thousands of applications. 31K POSITIVE REVIEWS!! FAST SHIPPING!!!! 100% AUTHENTIC PRODUCT OR YOUR MONEY BACK GUARANTEE! 100% satisfied customers. It says it all. Thank you for shopping with us!

Price: 70.99 USD

Location: Sarasota, FL

End Time: 2024-12-12T05:23:38.000Z

Shipping Cost: 0 USD

Product Images

Totalboat Totalprotect Epoxy Barrier Coat System White, QuartTotalboat Totalprotect Epoxy Barrier Coat System White, QuartTotalboat Totalprotect Epoxy Barrier Coat System White, QuartTotalboat Totalprotect Epoxy Barrier Coat System White, QuartTotalboat Totalprotect Epoxy Barrier Coat System White, QuartTotalboat Totalprotect Epoxy Barrier Coat System White, QuartTotalboat Totalprotect Epoxy Barrier Coat System White, QuartTotalboat Totalprotect Epoxy Barrier Coat System White, QuartTotalboat Totalprotect Epoxy Barrier Coat System White, Quart

Item Specifics

Return shipping will be paid by: Seller

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Return policy details:

Brand: TotalBoat

MPN: Does not apply

Item model number: 487739

Country of Origin: USA

Batteries Included?: No

Unit Count: 1.0 Count

Batteries Required?: No

Finish: Matte

Color Code: White

Age Range (Description): Adult

Package Information: Can

Finish Type: Matte

Package Dimensions: 7.56 x 4.33 x 4.33 inches

Paint Type: Spray

Manufacturer: TotalBoat

Item Package Quantity: 1

Coverage: 56 square feet per quart

Included Components: Primer

Item Weight: 3.83 pounds

Surface Recommendation: Fiberglass

Part Number: 487739

Item Volume: 710 Milliliters

Color: White

Item Form: Liquid

Specific Uses For Product: Priming, Barrier Coating, Blister Prevention

Is Discontinued By Manufacturer: No

Size: 1 Count (Pack of 1)

Type: Does not apply

Recommended

TotalBoat-495709 Gleam Marine Spar Varnish, Gloss and Satin Polyurethane Finish
TotalBoat-495709 Gleam Marine Spar Varnish, Gloss and Satin Polyurethane Finish

$111.90

View Details
THE CORPS! LANARD Action Figure TOTAL SOLDIER RAPID ASSAULT PATROL Red BOAT
THE CORPS! LANARD Action Figure TOTAL SOLDIER RAPID ASSAULT PATROL Red BOAT

$24.64

View Details
TotalBoat 100g UV Cure Clear Acrylic Resin with UV Flashlight for Resin Curin...
TotalBoat 100g UV Cure Clear Acrylic Resin with UV Flashlight for Resin Curin...

$31.22

View Details
TotalBoat Wet Edge Marine Topside Paint for Boats, Fiberglass, and Wood (Clas...
TotalBoat Wet Edge Marine Topside Paint for Boats, Fiberglass, and Wood (Clas...

$128.22

View Details
TotalBoat Underdog Marine Antifouling Bottom Paint for Fiberglass Black Gallon
TotalBoat Underdog Marine Antifouling Bottom Paint for Fiberglass Black Gallon

$183.87

View Details
TotalBoat Table Top Epoxy - Clear Epoxy Coating for Bars & Table Tops -...
TotalBoat Table Top Epoxy - Clear Epoxy Coating for Bars & Table Tops -...

$110.00

View Details
OSS TRIM TAB MOUNT WHITE  8000 TOTAL LUMENS UNDERWATER BOAT TRANSOM LED LIGHT
OSS TRIM TAB MOUNT WHITE 8000 TOTAL LUMENS UNDERWATER BOAT TRANSOM LED LIGHT

$250.00

View Details
Totalboat-488420 Marine Gelcoat for Boat Building, Repair and Composite Coatings
Totalboat-488420 Marine Gelcoat for Boat Building, Repair and Composite Coatings

$124.87

View Details
TotalBoat Wet Edge Marine Topside Paint for Boats, Fiberglass, and Wood (Whit...
TotalBoat Wet Edge Marine Topside Paint for Boats, Fiberglass, and Wood (Whit...

$126.70

View Details
2 Part Polyurethane Flotation Foam 1 QT Density Foam Total Boat NEW Resin Part A
2 Part Polyurethane Flotation Foam 1 QT Density Foam Total Boat NEW Resin Part A

$29.99

View Details