UBERTI SAA B-WESTERN GRIPS ~ SINGLE ACTION ARMY ~ Cattleman El Patron Evil Roy

Description: Arizona Custom Grips UBERTI SAA 1873 SINGLE ACTION ARMY STYLE REVOLVERS ~ Exclusive ~ MAGNA-TUSK™ B-Western Style Custom Stag Grips ~~~~~two-PIECE (with SCREWHOLE) STYLETHIS AUCTION IS FOR THE TWO-PIECE (SCREWHOLE) STYLE.Note: ANY of our grips, whether ONE-PIECE OR TWO PIECE style, will interchange and work on either style of grip frame. We include, free of charge, a conversion kit which allows these two-piece grips to mount onto a one-piece style grip frame (without a grip pin). Our conversion kit replaces the need for a grip pin and is actually a stronger design, and locks the grips up tight against the frame, allowing no movement. This gives you the advantage of the ease of maintenance of two-piece grips, while preserving the integrity of your revolver in original factory condition. Grip screw, conversion kit, and full illustrated instructions are included with each set of grips. 10292000 ~~~~~ WHAT THESE WILL FIT (Please read this through in its entirety): These Grips WILL FIT: * ANY of the standard sized UBERTI 1873 Single Action Army “plowhandle” style revolvers. Uberti’s standard sized grips will measure somewhere between 3-1/16 – 3-1/8” tall, depending on how you hold your ruler, tape, or caliper. These will be marked “Uberti,” and may also (but not necessarily) be marked by the U.S. importer, such as “Cimarron,” “Taylors & Co.”, “Navy Arms”, or “EMF”, etc. In addition to fitting any of the standard UBERTI SAA style revolvers, these grips will fit (i.e., incorporate the additional milling and fitting) for any of the following Uberti SAA revolvers: * Cimarron / Uberti Cattleman, 1873 Cattleman II, Cimarron Model P, Evil Roy, El Patron, Hombre*, American Arms Regulator*, Cimarron New Sheriff, Uberti US 7th Cavalry, U.S.V. Artillery, and Cavalry Scout, Pistoleer, Holy Smoker, Wyatt Earp Buntline, Rooster Shooter, Chisholm, Cody, Desperado, Frisco, Old West, Stallion, Buntline, Horseman, SASS Pro, CMS Pro, E.M.F. Dakota II* or Dakota III*; * Also: Taylor’s & Co. Smoke Wagon, Cattleman, Gambler, Cattleman 12-Shot, Runnin’ Iron, Taylor Marshall, Drifter, Devil Anse, Old Randall*, and Ranch Hand*; * Also: Any of Stoeger’s Uberti revolvers, or any Uberti SAA style revolver with the standard sized grip frame, or Uberti revolver from any other importer, even without a specific name or designation. If you have a standard SAA style revolver marked Uberti, these will fit. *PLEASE NOTE: if you have a BRASS gripframe (such as found on the Hombre, the Regulator, the Dakota II or III, Old Randall, or Ranch Hand revolvers), you MUST contact us prior to ordering and let us know what you have, as these grips may require additional specifications, profiling, and machining cuts. What these WILL NOT FIT: 1. Please note that these grips are made to fit ONLY the Uberti Model 1873 style Single Action revolvers, with the typical “plowhandle” shaped gripframe, and will NOT fit other makes of revolvers (such as Pietta, Armi San Marco, Colt, Ruger, etc.). These grips will also NOT fit the Bisley, the Birdshead, the Thunderer or the Lightning style revolvers, from ANY maker, which use a completely different shaped grip frame. Please email if you have any questions.2. In addition, these WILL NOT FIT grip frames which are around 3-3/8” tall. To make sure you are ordering the correct grip, please check your grip frame measurement prior to ordering. Your grips or grip frame should measure somewhere between 3-1/16 – 3-1/8” tall, depending on how you hold your ruler, tape, or caliper. The important thing is to make sure they are NOT around 3-3/8” tall. Taylor & Co.’s Gunfighter, Cimarron Bad Boy, the El Patron Grizzly Paw, and the Uberti Callahan, for example, have the taller 3-3/8” grip frame. If you have one of these, any of our Uberti 1860 Army Conversion & Metallic Cartridge revolver grips are milled to work for these, as well as the Conversions. Please send us an email and tell us your specific model if you cannot locate what you need, or if you have any questions. We are always happy to help. A note on the Italian-produced Revolvers: The Italian firms, located in Northern Italy, have been making SAA style revolvers now for well over a half century, and have made a huge number of makes and models and grip frame profiles with varying configurations over the years. We have an in-depth knowledge of the differing grip configurations, have a large library of gripframe variations from the various makers both old and new, and have vast experience making grips for Uberti, Pietta, Armi San Marco, and the other Italian gunmaking firms. Our experienced makers go to great lengths to ensure an exacting fit, including utilizing modern precision CNC production techniques, as well as incorporating old-time hand tuning and hand checking the fit of every grip on our reference frames prior to leaving our factory. We have a long list of many satisfied customers in the shooting industry who have purchased grips to use in a wide variety of applications, and we can safely and confidently guarantee proper fit and finish to your complete satisfaction.For an additional charge, custom fitting is an option. Please contact us for further details if you are interested in custom fitting. 01122100 Arizona Custom Grips Handcrafted on an individual Custom basis out of Magna-Tusk™, our solid, dense proprietary substrate which is formulated out of natural materials for an authentic look and feel, and which yields a finished product which is the ultimate rendition of the classic stag grips of the golden era of Westerns. Better materials and our proprietary pigmenting process yields a finished product better than the originals. These grips are milled from a solid slab and are not cast. This avoids the inclusions, air pockets, and most importantly the cheap "cast plastic" look found in the urethane and other imitation materials commonly available. Like natural grips, with use and handling over time they will form an authentic patina and will only improve with age. They look better, age better, and perform better. And perhaps best of all, these grips are made entirely in the U.S.A.! Gun prop and holster not included -- only the grips are for sale. Please note that the grips shown are a stock photo used for illustration purposes only. Your grips will be individually hand cut and appear similar to these. The "B-Western": These "B-Western" Style Custom grips are hand-carved one-at-a-time in recognition of one of America's most outstanding and lasting cultural achievements of the 20th century -- the "B-Western." Styled after the grips seen on the revolvers of classic Hollywood Westerns of the 1930's to the 1960's (the "golden era of Hollywood Westerns"), these grips were featured in numerous Western productions both on Television and on the Silver Screen. Gunsmoke, Bonanza, The Rifleman, Rawhide, The Virginian, and many others too numerous to mention, all took America back to a simpler time and place. Times have changed, but the lessons and values of that unforgettable period still have a place in the hearts of millions of Americans and many other Western fans throughout the world who appreciate the enduring contribution to our culture and society made by the unique and colorful characters of the Old West. 4.18.13 Arizona Custom Stag™ Grips: These grips are completely unique, custom, and one-of-a-kind. Each is hand cut, and no two are the same. You will not find another set like them on any gun at any Western event, guaranteed! Hand made in painstaking, exacting detail to authentic feel and dimensions. We strive for museum quality with every pair. Arizona Custom Stag™ looks, feels, and ages like the genuine product, with durability far exceeding Ivory (Ivory is a relatively fragile material, which often cracks under stress and age). Magna-Tusk™, our Premier Grade product used in these grips, is filled with natural materials, and works and polishes as well as looks like the real thing. It takes carving with superior detail and definition, and accurately captures that authentic, weathered, deep, dark chocolate brown/black color in the bark pattern sought after by stag collectors. With age, it develops a soft, mellow patina which makes it indistinguishable from the more expensive and fragile product. These grips are used in professional applications where only the best will do. We have supplied these grips to Hollywood and other locations that demand only the best in durability, design, and authenticity. We cut no corners, and make every grip with the intention of it being a grip which will last a lifetime. A fine revolver deserves a fine grip. If you have been looking for the ultimate B-Western grip, you won't be disappointed!! The durability and excellent aging characteristics of these grips are enhanced by our exclusive and permanent bonded pigment application process which, once cured, won't chip, crack, or peel like superficially applied paint products found on less expensive grips. Accept no substitutes. Arizona Custom Stag™ adds a touch of class and realism which is completely lost by using lesser quality "cast plastic" imitations available elsewhere. Grip screws included with all grips. As with all Single Action grips, minor fitting may be, but is not usually, required due to small variations in grip frames. Full instructions included with all grips. The distinctive qualities and authentic presentation of Arizona Custom Stag™ offers an authentic look, heft and feel which invoke the aura and spirit of the Old West. Guaranteed to please even the most discriminating collector and Western memorabilia aficionado. Full money back, less shipping, if not fully satisfied! If returning, please note that the product must be returned in original, unaltered condition. Remember, above all: Ride Hard, Shoot Straight, and Speak the Truth! Happy Trails!! 5.1.13

Price: 134.95 USD

Location: Mesa, Arizona

End Time: 2024-02-25T19:20:48.000Z

Shipping Cost: 5.99 USD