Description: Arizona Custom GripsUBERTI SAA(SINGLE ACTION ARMY REVOLVERS)~ Exclusive ~ MAGNA-TUSK™white STAG GRIPSSimulated Stag Grips milled out of a solid block of Magna-Tusk, denser and heavier than regular Ivory or Stag. See below for details.~~~~~two-PIECE (with SCREWHOLE) STYLETHIS AUCTION IS FOR THE TWO-PIECE (SCREWHOLE) STYLE.Note: ANY of our grips, whether ONE-PIECE OR TWO PIECE style, will interchange and work on either style of grip frame. We include, free of charge, a conversion kit which allows these two-piece grips to mount onto a one-piece style grip frame (without a grip pin). Our conversion kit replaces the need for a grip pin and is actually a stronger design, and locks the grips up tight against the frame, allowing no movement. This gives you the advantage of the ease of maintenance of two-piece grips, while preserving the integrity of your revolver in original factory condition. Grip screw, conversion kit, and full illustrated instructions are included with each set of grips. 10292000~~~~~ WHAT THESE WILL FIT (Please read this through in its entirety, including the "what these will NOT fit section below): These Grips WILL FIT: * ANY of the standard sized UBERTI 1873 Single Action Army “plowhandle” style revolvers. Uberti’s standard sized grips will measure somewhere between 3-1/16 – 3-1/8” tall, depending on how you hold your ruler, tape, or caliper. These will be marked “Uberti,” and may also (but not necessarily) be marked by the U.S. importer, such as “Cimarron,” “Taylors & Co.”, “Navy Arms”, or “EMF”, etc. In addition to fitting any of the standard UBERTI SAA style revolvers, these grips will fit (i.e., incorporate the additional milling and fitting) for any of the following Uberti SAA revolvers: * Cimarron / Uberti Cattleman, 1873 Cattleman II, Cimarron Model P, Evil Roy, El Patron, Hombre*, American Arms Regulator*, Cimarron New Sheriff, Uberti US 7th Cavalry, U.S.V. Artillery, and Cavalry Scout, Pistoleer, Holy Smoker, Wyatt Earp Buntline, Rooster Shooter, Chisholm, Cody, Desperado, Frisco, Old West, Stallion, Buntline, Horseman, SASS Pro, CMS Pro, E.M.F. Dakota II* or Dakota III*; * Also: Taylor’s & Co. Smoke Wagon, Cattleman, Gambler, Cattleman 12-Shot, Runnin’ Iron, Taylor Marshall, Drifter, Devil Anse, Old Randall*, and Ranch Hand*; * Also: Any of Stoeger’s Uberti revolvers, or any Uberti SAA style revolver with the standard sized grip frame, or Uberti revolver from any other importer, even without a specific name or designation. If you have a standard SAA style revolver marked Uberti, these will fit. *PLEASE NOTE: if you have a BRASS gripframe (such as found on the Hombre, the Regulator, the Dakota II or III, Old Randall, or Ranch Hand revolvers), you MUST contact us prior to ordering and let us know what you have, as these grips may require additional specifications, profiling, and machining cuts. What these WILL NOT FIT: 1. Please note that these grips are made to fit ONLY the Uberti Model 1873 style Single Action revolvers, with the typical “plowhandle” shaped gripframe, and will NOT fit other makes of revolvers (such as Pietta, Armi San Marco, Colt, Ruger, etc.). These grips will also NOT fit the Bisley, the Birdshead, the Thunderer or the Lightning style revolvers, from ANY maker, which use a completely different shaped grip frame. Please email if you have any questions.2. In addition, these WILL NOT FIT grip frames which are around 3-3/8” tall. To make sure you are ordering the correct grip, please check your grip frame measurement prior to ordering. Your grips or grip frame should measure somewhere between 3-1/16 – 3-1/8” tall, depending on how you hold your ruler, tape, or caliper. The important thing is to make sure they are NOT around 3-3/8” tall. Taylor & Co.’s Gunfighter, Taylor’s Cattleman 44 Mag., Cimarron Bad Boy, the El Patron Grizzly Paw, and the Uberti Callahan, for example, have the taller 3-3/8” grip frame. If you have one of these, any of our Uberti 1860 Army Conversion & Metallic Cartridge revolver grips are milled to work for these, as well as the Conversions. Please send us an email and tell us your specific model if you cannot locate what you need, or if you have any questions. We are always happy to help. A note on the Italian-produced Revolvers: The Italian firms, located in Northern Italy, have been making SAA style revolvers now for well over a half century, and have made a huge number of makes and models and grip frame profiles with varying configurations over the years. We have an in-depth knowledge of the differing grip configurations, have a large library of gripframe variations from the various makers both old and new, and have vast experience making grips for Uberti, Pietta, Armi San Marco, and the other Italian gunmaking firms. Our experienced makers go to great lengths to ensure an exacting fit, including utilizing modern precision CNC production techniques, as well as incorporating old-time hand tuning and hand checking the fit of every grip on our reference frames prior to leaving our factory. We have a long list of many satisfied customers in the shooting industry who have purchased grips to use in a wide variety of applications, and we can safely and confidently guarantee proper fit and finish to your complete satisfaction.For an additional charge, custom fitting is an option. Please contact us for further details if you are interested in custom fitting. 06222100 Arizona Custom Grips About Magna-Tusk™ Ivory and Stag Grips: Magna-Tusk™ Ivory and Stag grips, a product of Arizona Custom Grips, are manufactured out of our high-grade, high density ivory material designed exclusively as a premium, high-strength grip material. Vastly superior to standard bonded ivory or stag found on most factory and other aftermarket grips, Magna-Tusk™ is capable of withstanding the heaviest recoil and impact, and is the toughest alternative grip material available today, while still retaining the pristine look of real ivory or stag. It is rock-solid, stable, and water, chemical, and oil resistant. It is flame and heat resistant, and is entirely void-free, with over 10x the strength, durability, and impact resistance of alternative materials. Unlike with real ivory or stag, there is no routine care and maintenance involved, with no danger of it drying out and cracking if not maintained properly or if left in the heat. It is filled with premium natural compounds to produce outstanding aesthetic properties and mechanical performance. When aged with our natural aging process, it takes on the equivalent of a 100-year-old patina, with subtle grain details which many experts cannot tell apart from the real thing. In addition, the material has a fine grain structure, which holds intricate detail for carvings, artistic relief work, etc., found on many historic grips. 08292000 Please note that the photo used is a stock photo (a sample pair). Yours will appear similar to these. Customer satisfaction is important to us – we guarantee your complete satisfaction with every purchase!!
Price: 89.95 USD
Location: Mesa, Arizona
End Time: 2024-02-12T00:00:11.000Z
Shipping Cost: 5.99 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
For Gun Make: Uberti SAA Revolvers
Material/Finish: Magna-Tusk White Stag
MPN: Does Not Apply
For Gun Type: Uberti SAA Revolvers
Brand: Arizona Custom Grips
Available Variations
Color: Silver Liberty Eagle
Price: 94.95 USD
Available Quantity: 0
Quantity Sold: 0
Color: Gold Liberty Eagle
Price: 94.95 USD
Available Quantity: 0
Quantity Sold: 0
Color: Antique Nickel Steer Skull
Price: 94.95 USD
Available Quantity: 2
Quantity Sold: 2
Color: Red Steer Skull
Price: 94.95 USD
Available Quantity: 1
Quantity Sold: 1
Color: No Medallion
Price: 89.95 USD
Available Quantity: 114
Quantity Sold: 29
Color: Silver Colt
Price: 109.95 USD
Available Quantity: 105
Quantity Sold: 13
Color: Gold Colt
Price: 109.95 USD
Available Quantity: 103
Quantity Sold: 3
