Universal Dana 60 / 70 Rear Axle Disc Brake Kit Conversion Brackets

Description: Product- You get both brackets and six grade 8 bolts and zinc plated lock washers & nuts. We do NOT supply the rotors, loaded calipers (constitutes: calipers, pads and slide pins) or the flex hoses (you must run flex hoses with this kit and adapt to your hard line). Due to the variations in the Dana 70 axles please contact me for a part number list and let me know if you have a Dana 60 or 70 as we use different rotors on these axles. The calipers are the large single piston design. These disc brake brackets will accept the common 1976-1978 Cadillac Eldorado rear calipers that have a built in mechanical actuated E-brake as well if you require that function. Below is a list of what is included with each purchase, you will not be receiving anything else in this purchase. 2 pieces 3/8" thick laser cut brackets from 1020 steel with tapped caliper mount holes6 pieces of 1/2-20 grade 8 zinc plated x 1 1/2" long hex head bolts6 pieces of 1/2-20 grade 8 zinc plated standard nut6 pieces of 1/2" standard grade 2 lock washer zinc plated Fit- This universal setup will fit the rock solid Dana 60 / 70 full float rear axle single wheel (if you have dual wheels contact me prior to purchase for more info). These brackets share the two standard 60 / 70 axle tube drum brake backing mount patterns taking the guesswork out of which setup you have under your truck. It also allows you to plan your build ahead or piece it together over time as the funds present themselves. Blow or twist the rear axle and you now do not have to worry if this kit will fit the next 60 / 70 axle you find a good deal on. Standard three bolt bracket machined and fabricated, it will be a direct bolt up to your existing axle tube end flange if you have a Dana 60 rear axle. If you have a Dana 70 it will bolt up but depending on year, make and model / hub style you may need tubing spacers. Note, many do not need any spacers at all when you run our rotor and caliper bracket combination. If you know how long of tube spacers needed we can provide them cut to length at an additional cost, please send me a message for details on these spacers. Depending on your hub you may need to source new studs and or drill the stud holes slightly larger on the hub or rotor to make them match for the stud you are using. We do have part numbers for studs we have found to work in the past. There are many variations to the Dana 70 rear axle when it comes to hub and spacing out from the axle tube drum flange. We have dealt with these for many years giving us a leg up on our competitors. For dual wheel applications please contact us prior to purchase. Material and Finish- Machined for a precision fit from 1020 Steel and shipped clean and free of burrs. Product will come in bare steel and coatings can be added by customer at their own discretion. Inventory- Product is stocked ready for shipment on the shelf with normally a 1 day turn and shipping provided via USPS flat rate mail. Last- We are here to be of service to you our customers and strive for 100% satisfaction. We believe in fair and honest business practices and try to make sure you the customer are well informed before spending your hard earned money. Thank you for the opportunity.

Price: 56.95 USD

Location: Lafayette, Colorado

End Time: 2024-11-26T16:44:46.000Z

Shipping Cost: 9 USD