Upgraded Magnetic Phone Holder for Air vent, Windshield, Dashboard, Car Cup, 360

Description: 1. Dashboard + Air Vent (Adjustable Screw Clip)Two-in-One Upgraded Suction Cup Magnetic Dashboard Low-Profile, Windshield Phone Holder & Air Vent Mount for Cars, Compatible with iPhone 14, 13, 12 Generations & MagSafe cases + All Mobiles & non-MagSafe CasesFeatures:TWO-IN-ONE MULTI-FUNCTION DESIGN: this phone holder comes with suction cup and air vent mount which can be used on dashboard and with air vent.SPECIAL DESIGN FOR MAGSAFE DEVICES: upgraded 60 mm diameter & 20 built-in magnets which is specially designed for iPhone 12 series or up and MagSafe cases without the need of universal magnetic rings that are included.EASY INSTAL AND REMOVAL WITH INDUSTRIAL STRENGTH SUCTION CUP: this phone holder has industrial-strength suction cup and strong sticky gel which can be easily mounted on dashboard. The cup base can be rotated 360° to allow user reach the desired angle. It is designed to be easy to install or remove without leaving marks and can be used on multiple vehicles.SAFE DRIVING - DON’T BLOCK YOUR VIEW: this low profile magnetic phone holder is designed to provide you better convenient by using your phone for navigation while driving without blocking your viewUPGRADED CONVENIENT CLIP: this air vent clip have been upgraded with thicker rubber jaw to protect your air vent from scratches. Just simply insert the vent clip into your car’s air vent and tighten the adjustable screw.FALLING OFF WORRY FREE: this air vent magnetic phone mount is built in with 20 pcs super strong & thick magnets, N52, which can hold up to 3.97 lbs. Thus, it can hold an iPhone 14 pro max which only weighs 0.53 lbs with ease, even when you run over a heavy bump or rough road.EXTRA CONVENIENCE WITH 360° ROTATION: with our advance ball-head technology, this magnetic car mount support 360 degree rotation. This allows users to reach their desired angle view with ease. Moreover, when the position is locked, the head never tilt downward or deviate from it’s set position while running over speed bumpers or rough roads.SUPPER EASY INSTALLATION: with the special design, both the suction cup and the clip are extremely easy to install. It will take less than a minute to suck the cup on the dashboard and mount the clip on your car air vent.ONE-HAND OPERATION: with the special built-in magnet designed for MagSafe phone accessories, it snaps-in your phone into the right position with ease and no hasslesWHAT YOU GET: one suction cup base, one air vent clip base, one magnetic head, 2 universal magnetic rings for non-MagSafe accessories.UNIVERSAL COMPATIBILITY: PTz Worlds magnet phone holder is widely compatible with all smart phones. Compatible with iPhone 14, 13, 12 series & MagSafe cases. For non-MagSafe cases, there two universal magnetic rings in the package which you need to glue it on the back of your case to use. Thus, it is compatible with Samsung Galaxy, Note 20/S22 Ultra/S20/S21, Note 10+/LG/ Google Note, Nexus, etc.Functions:Built-in super strong magnet N52, Upgraded low-profile Suction Cup Magnetic Dashboard Phone Holder & Air Vent Mount.Compatible with all phone cases.Compatible with most car vents. 2. Dashboard/Windshield + Air Vent Two-in-One Upgraded Suction Cup Magnetic Dashboard, Windshield Phone Holder & Air Vent Mount for Cars Compatible with MagSafe Accessories for all Phones, Super Strong Magnet, SturdyFeatures:TWO-IN-ONE MULTI-FUNCTION DESIGN: this phone holder comes with suction cup and air vent mount which can be used in dashboard, windshield, and air vent.SPECIAL DESIGN FOR MAGSAFE DEVICES: upgraded 60 mm diameter & 20 built-in magnets which is specially designed for iPhone 12 series or up and MagSafe cases without the need of universal magnetic rings that are included.EASY INSTAL AND REMOVAL UPGRADED 360° ROTATABLE SUCTION CUP: this phone holder has industrial-strength suction cup and strong sticky gel which can be easily mounted on windshield, dashboard, and other flat surfaces. The cup base can be rotated 360° to allow user reach the desired angle. It is designed to be easy to install or remove without leaving marks and can be used on multiple vehicles.UPGRADED CONVENIENT CLIP: this air vent clip have been upgraded with thicker rubber jaw to protect your air vent from scratches. Just simply insert the vent clip into your car’s air vent and tighten the adjustable screw.FALLING OFF WORRY FREE: this air vent magnetic phone mount is built in with 20 pcs super strong & thick magnets, N52, which can hold up to 3.97 lbs. Thus, it can hold an iPhone 14 pro max which only weighs 0.53 lbs with ease, even when you run over a heavy bump or rough road.EXTRA CONVENIENCE WITH 360° ROTATION: with our advance ball-head technology, this magnetic car mount support 360 degree rotation. This allows users to reach their desired angle view with ease. Moreover, when the position is locked, the head never tilt downward or deviate from it’s set position while running over speed bumpers or rough roads.SUPPER EASY INSTALLATION: with the special design, both the suction cup and the clip are extremely easy to install. It will take less than a minute to suck the cup on the dashboard or windshield and mount the clip on your car ventONE-HAND OPERATION: with the special built-in magnet designed for MagSafe phone accessories, it snaps-in your phone into the right position with ease and no hasslesWHAT YOU GET: one suction cup base, one air vent clip base, one magnetic head, 2 universal magnetic rings for non-MagSafe accessories.UNIVERSAL COMPATIBILITY: PTz Worlds magnet phone holder is widely compatible with all smart phones. Compatible with iPhone 14, 13, 12 series & MagSafe cases. For non-MagSafe cases, there two universal magnetic rings in the package which you need to glue it on the back of your case to use. Thus, it is compatible with Samsung Galaxy, Note 20/S22 Ultra/S20/S21, Note 10+/LG/ Google Note, Nexus, etc.Functions:Built-in super strong magnet N52, Upgraded Suction Cup Magnetic Dashboard, Windshield Phone Holder & Air Vent Mount.Compatible with all phone cases.Compatible with most car vents. 3. Cup Holder + Air Vent (Adjustable Screw Clip) Two-in-One Upgraded Car Cup Magnetic Phone Holder & Air Vent Mount for Cars Compatible with MagSafe Accessories for all Phones, Super Strong Magnet, Sturdy, 360° Adjustable AngleFeatures:TWO-IN-ONE MULTI-FUNCTION DESIGN: this magnetic car cup phone holder comes with car cup holder base and air vent mount which can be used in both cup holder and air ventSPECIAL DESIGN FOR MAGSAFE DEVICES: upgraded 60 mm diameter & 20 built-in magnets which is specially designed for iPhone 12 series or up and MagSafe cases without the need of universal magnetic rings that are included.FIT ALL CUP HOLDER WITH WIDER EXTENDABLE BASE: the extendable range of this car cup magnetic phone holder base is from 2.56” to 3.74” which can fit with all cup holders in cars, vans, and trucks.FREE ANGLE ADJUSTABLE & DURABLE: the 12.5” long upgraded solid gooseneck allows users to freely adjust its position. Moreover, it is built to last with aluminum alloy and center shaft structure.UPGRADED CONVENIENT CLIP: this air vent clip have been upgraded with thicker rubber jaw to protect your air vent from scratches. Just simply insert the vent clip into your car’s air vent and tighten the adjustable screw.FALLING OFF WORRY FREE: this car cup magnetic phone mount is built in with 20 pcs super strong & thick magnets, N52, which can hold up to 3.97 lbs. Thus, it can hold an iPhone 14 pro max which only weighs 0.53 lbs with ease, even when you run over a heavy bump or rough road.EXTRA CONVENIENCE WITH 360° ROTATION: with our advance ball-head technology, this magnetic car mount support 360 degree rotation. This allows users to reach their desired angle view with ease. Moreover, when the position is locked, the head never tilt downward or deviate from it’s set position while running over speed bumpers or rough roads.SUPPER EASY INSTALLATION: with the special design, both the car cup base and the clip are extremely easy to install. It will take less than a minute to put the cup base in the cup holder and mount the clip on your car ventONE-HAND OPERATION: with the special built-in magnet designed for MagSafe phone accessories, it snaps-in your phone into the right position with ease and no hasslesWHAT YOU GET: one cup holder base, one air vent clip base, one magnetic head, 2 universal magnetic rings for non-magsafe accessories.UNIVERSAL COMPATIBILITY: PTz Worlds magnet phone holder is widely compatible with all smart phones. Compatible with iPhone 14, 13, 12 series & MagSafe cases. For non-MagSafe cases, there two universal magnetic rings in the package which you need to glue it on the back of your case to use. Thus, it is compatible with Samsung Galaxy, Note 20/S22 Ultra/S20/S21, Note 10+/LG/ Google Note, Nexus, etc.Functions:Built-in super strong magnet N52 and Upgraded Car Cup Magnetic Phone Holder & Air Vent Mount for Car, Upgraded Solid Gooseneck and Add-on Upgraded convenient clip, Sturdy, Never Fall, 360° Adjustable Angle.Compatible with all phone cases.Compatible with most car vents. 4. Air Vent (Adjustable Screw Clip) Upgraded Magnetic Phone Holder For Car, Super Strong Magnet, Air Vent Mount, Upgraded Convenient clip, Sturdy, Never Fall, 360° Adjustable Angle, Special Designed for MagSafe AccessoriesFeatures:SPECIAL DESIGN FOR MAGSAFE DEVICES: upgraded 60 mm diameter & 20 built-in magnets which is specially designed for iPhone 12 series or up and MagSafe cases without the need of universal magnetic rings that are included.UPGRADED CONVENIENT CLIP: this air vent clip have been upgraded with thicker rubber jaw to protect your air vent from scratches. Just simply insert the vent clip into your car’s air vent and tighten the adjustable screw.FALLING OFF WORRY FREE: this air vent magnetic phone mount is built in with 20 pcs super strong & thick magnets, N52, which can hold up to 3.97 lbs. Thus, it can hold an iPhone 14 pro max which only weighs 0.53 lbs with ease, even when you run over a heavy bump or rough road.EXTRA CONVENIENCE WITH 360° ROTATION: with our advance ball-head technology, this magnetic car mount support 360 degree rotation. This allows users to reach their desired angle view with ease. Moreover, when the position is locked, the head never tilt downward or deviate from it’s set position while running over speed bumpers or rough roads.SUPPER EASY INSTALLATION: with the special design, this car vent phone mount is extremely easy to install. It will take less than a minute to mount it on your car vent. ONE-HAND OPERATION: with the special built-in magnet designed for MagSafe phone accessories, it snaps-in your phone into the right position with ease and no hasslesWHAT YOU GET: one air vent clip base, one magnetic head, 2 universal magnetic rings for non-MagSafe accessories.UNIVERSAL COMPATIBILITY: PTz Worlds magnet phone holder is widely compatible with all smart phones. Compatible with iPhone 14, 13, 12 series & MagSafe cases. For non-MagSafe cases, there two universal magnetic rings in the package which you need to glue it on the back of your case to use. Thus, it is compatible with Samsung Galaxy, Note 20/S22 Ultra/S20/S21, Note 10+/LG/ Google Note, Nexus, etc.Functions:Built-in super strong magnet N52 and Upgraded Convenient Clip, Sturdy, Never Fall, Super Strong Magnet, 360° Adjustable Angle, Compatible with iPhone 14, 13, 12 Generations & MagSafe cases Plus All Mobiles & non-MagSafe Cases.Compatible with all phone cases.Compatible with most car vents. 5. Air Vent (Twist-lock Clip)Upgraded Magnetic Phone Holder For Car, Super Strong Magnet, Air Vent Mount, Upgraded Convenient Clip, Sturdy, Never Fall, 360° Adjustable Angle, Special Designed for MagSafe AccessoriesFeatures:SPECIAL DESIGN FOR MAGSAFE DEVICES: upgraded 60 mm diameter & 20 built-in magnets which is specially designed for iPhone 12 series or up and MagSafe cases without the need of universal magnetic rings that are included.UPGRADED CONVENIENT CLIP: this air vent clip have been upgraded with rubber jaw to protect your air vent from scratches. Just simply insert the vent clip into your car’s air vent and twist to lockFALLING OFF WORRY FREE: this air vent magnetic phone mount is built in with 20 pcs super strong & thick magnets, N52, which can hold up to 3.97 lbs. Thus, it can hold an iPhone 14 pro max which only weighs 0.53 lbs with ease, even when you run over a heavy bump or rough road.EXTRA CONVENIENCE WITH 360° ROTATION: with our advance ball-head technology, this magnetic car mount support 360 degree rotation. This allows users to reach their desired angle view with ease. Moreover, when the position is locked, the head never tilt downward or deviate from it’s set position while running over speed bumpers or rough roads.SUPPER EASY INSTALLATION: with the special design, this car vent phone mount is extremely easy to install. It will take less than a minute to mount it on your car vent. ONE-HAND OPERATION: with the special built-in magnet designed for MagSafe phone accessories, it snaps-in your phone into the right position with ease and no hasslesWHAT YOU GET: one air vent clip base, one magnetic head, 2 universal magnetic rings for non-magsafe accessories.UNIVERSAL COMPATIBILITY: PTz Worlds magnet phone holder is widely compatible with all smart phones. Compatible with iPhone 14, 13, 12 series & MagSafe cases. For non-MagSafe cases, there is a metal ring in the package which you need to glue it on the back of your case to use. Thus, it is compatible with Samsung Galaxy, Note 20/S22 Ultra/S20/S21, Note 10+/LG/ Google Note, Nexus, etc.Functions:Built-in super strong magnet N52 and Upgraded Magnetic Phone Holder for Car, Air Vent Mount, Upgraded Convenient Clip, Sturdy, Never Fall, 360° Adjustable Angle.Compatible with all phone cases.Compatible with most car vents. 6. Air Vent (Metal Hook)Upgraded Magnetic Phone Holder for Car, Air Vent Mount, Metal Hook, 360 Degree Features:SPECIAL DESIGN FOR iPhone 14, 13, 12 GENERATIONS & MAGSAFE CASES: upgraded 60 mm diameter magnet rings which is specially designed for iPhone and MagSafe cases, so you don’t need a magnet ring attach to your case to use. Extremely easy to use with a snap into its right position hassle-free.UPGRADED LONGER METAL HOOK: with advanced technology and metal hook design, this magnetic phone mount for car stays very sturdy on your car vent and never fall off like the other vent clip.SUPER STRONG N52 MAGNET: this car magnetic phone mount is built in with 20 pcs super strong magnetic power N52 which can hold up to 3.97 lbs. Thus, it can hold an iPhone 14 pro max which only weighs 0.53 lbs with ease.360° ROTATION TO SUPPORT ALL ANGLES: with upgraded technology, this air vent magnetic car mount support 360 degree rotation to reach the desired view angle. This provides extremely convenient for users to reach the best view angle with easeSUPPER EASY INSTALLATION: with the special design, this car vent phone mount is extremely easy to install. It will take less than a minute to mount it on your car vent. ONE-HAND OPERATION: with the special built-in magnet designed for MagSafe phone accessories, it snaps-in your phone into the right position with ease and no hasslesUNIVERSAL COMPATIBILITY: PTz Worlds magnet phone holder is widely compatible with all smart phones. Compatible with iPhone 14, 13, 12 series & MagSafe cases. For non-MagSafe cases, there is a metal ring in the package which you need to glue it on the back of your case to use. Thus, it is compatible with Samsung Galaxy, Note 20/S22 Ultra/S20/S21, Note 10+/LG/ Google Note, Nexus, etc.Functions:Built-in super strong magnet N52 and upgraded solid metal hook extendable up to 26mm.Compatible with all phone cases.Compatible with most car ventsTechnical Data:Material: PC, N52 magnets, Aluminum

Price: 16.97 USD

Location: Avondale, Arizona

End Time: 2024-02-13T22:06:22.000Z

Shipping Cost: N/A USD