〖USA〗4 Axis Nema23 Stepper Motor Kit 112mm 425oz-in Driver USBCNC Breakout Board

Description: 【USA Stock & Fast Shipping】〖USA〗4 Axis Nema23 Stepper Motor Kit 112mm 425oz-in Driver USBCNC Breakout Board for CNC Router Engraving Milling Machine Good News: We have US Warehouse in USA,so we will ship this product from USA to American Customers directly. Package include: 4 x 23HS2430B Nema23 stepper motor Dual Shaft (112mm length,425oz-in,3.0A,1.8deg) 4 x FMD2740C stepper motor driver 12-40VDC,4A 1 x 400W 36V/9.7A DC switching power supply 1 x 4 Axis USBCNC breakout board 1 x Hand controller 1 x USB Cable CD include with English user manual and USBCNC software and register code. 100% Brand New and High Quality!!! 1. USBCNC breakout board 1) Products brief introduction USBCNCV4.0 is a high performance motion controller which based on PC software USBCNC control, the system can complete the conversion from G code to connect stepper motor’s driver motion control signal without requiring any additional hardware and software. This control card is compatible with most stepper driver and servo driver,it is a perfect controller that instead of parallel Mach3 interface board. This interface board is based on USBCNC MK1 and just use in our provide software and function, cannot support other versions of the software and function 2) Computer system requirement Minimum configuration: 1) CPU:1GHz 2) Memory: 512MB 3) 500MB free disk space 4) DIRECTX9 graphics device with WDDM 1.0 or higher driver 5) USB 2.0 interface 6) Net FRAMEWORK 3.5SP17) Support system : Win XP/7/8/10 The recommended configuration: 1) CPU:2GHz dikaryon 2) Memory: 2GB; 3) 1G free disk space 4) DIRECTX9 graphics device with WDDM 1.0 or higher driver 5) USB 2.0 interface 6) Net FRAMEWORK 3.5SP1 The recommended configuration:1) CPU:2GHz dikaryon2) Memory: 2GB;3) 1G free disk space4) DIRECTX9 graphics device with WDDM 1.0 or higher driver5) USB 2.0 interface6) Net FRAMEWORK 3.5SP1 3.Production feature 1. After the revision,V4 version using the red PCB board, PCB size is 135.3*82.5mm.;2. The front of the narrow edge placed with USB communication interface and DB9 hand control interface for the convenience of customers drawn from the case panel directly;3. The back-end of narrow edge is power input and output interface and 3 relay output interface; relay is strong interference source, relay away from the design of main control chip, it is conducive to the stability of the board;4. One of the two wide sides is stepper motor and principal axiscontrol signal output;5. The another side of two wide sides is the emergency stop, manual speed input, limiting input interface; one side for the input, another side output connection mode is simple and convenient;6. 5V and 12V power module compact independence, security, stability;7. External ensure the stability of the system work effectively with crystal active and main control chip shield;8.outline dimension is 135.3*82.5mm, product positioning hole installment dimension is 127*75mm9. The software is USBCNC,not mach3,pls note!This item is easy to operate for DIY hobby user,but it is control by USB port,so need more careful for the software install,and pls must be strict read the user manual and follow us. Description:USB 2.0 interfaceSupport system: Win XP/7/8/10Card input voltage: 15-36V;Limit port working voltage: 12VWith Hand control box interface,external hand control box can use this interface to access the system, the interface is standard DB9 form;With manual speed control interface;Limit switch connection methodPower supply voltage 18 to 50V DCWith the current of 1.4-5.6ASubdivision precision 400,800,1600,3200,6400,12800,25600,1000,2000,4000,5000,8000,10000,20000 and 25000 optionalDrive any less than 5.6A current of 2-phase or 4-phase hybrid stepper motorWiring between Motor Driver & Breakout BoardX/Y/Z/A axis stepper motor control signal output, the definition is CK+\CK-\DIR+\DIR-,respectively for pulse positive, pulse negative, direction positive ,direction negative, the board using anode common connection method, so CK+ and DIR+ linked together connect to the 5V on the board,this board does not support the common method. A) USB interface,connect to the computer USB port through this interface.B) Hand control box interface,external hand control box can use this interface to access the system,the interface is standard DB9 form,its definition as shown in the table 4-1.C) Power indicatorD) Board card firmware upgrade button UP and reset button RST, firmware has been updated.E) Manual speed control interface (GND,JOG,VCC)F) Limit input interface. Limit interface definitions are listed in the following table 4-2G) Spindle control selector switch,the switch shift up to the S1 position for the spindle speed control ; switching switch position On below for output control MIST relay .H) External pause and reset interface; the 2 feet marked PAUSE connect suspend switch, 2 feet marked RESET connection reset switch.I) Software MIST control relay output, software settings output marked 3, defined from top to bottom, 3 feet is NC, NO, COM.J) Software FLOOD control relay output ,output marked 2 in the software settings , defined from top to bottom, 3 feet is NC, NO, COM.K) Software SPINDLE control relay output,output marked 1 in the software settings , defined from top to bottom, 3 feet is NC, NO, COM.L) Board working power input,input DC 15~36VM) 12V output interface.as the board marked, GND is -, 12V is +.L) Board working power input,please pay attention to input DC 15~36V,overvoltage or reverse connection will damage the board.N) Spindle control output interface: definitions turn for GND DIR PWM2 12V, respectively is ground,direction signal output, spindle 0-10V speed control signal output, 12V output.O,P,Q,R) A,X,Y,Z axis stepper motor control signal output, the definition is:CK+\CK-\DIR+\DIR-,respectively is impulsion positive, impulsion negative, direction positive, direction negative 2. FMD2740C stepper motor driverFMD2740C DriverInput voltage and SubdivisionPower supply voltage 18 to 50V DCWith the current of 1.4-5.6ASubdivision precision 400,800,1600,3200,6400,12800,25600,1000,2000,4000,5000,8000,10000,20000 and 25000 optionalDrive any less than 5.6A current of 2-phase or 4-phase hybrid stepper motor;SuitableDrive any 4A phase current of 2-phase or 4-phase hybrid stepping motor;Suitable for a variety of small and medium-sized automation equipment and instruments,for example: Small engraving machine, cnc router machine, etc.IntroductionFMD2740C FMD2740C driver is suitable for driving small and medium-sized phase current is less than 4A 2-phase or 4-phase hybrid stepping motor. Due to the adoption of the new bipolar constant current chopper drive technology, using the same motor can output more speed and power than other drivers. Segments stepper motor running accuracy improved, reduces vibrations and noise reduction. CharacteristicsHigh-performanceHigh-speed optocoupler signal isolation inputBipolar constant current chopping mode20kHz chopping frequencyElectrical input signal is TTL compatibleStationary current is automatically reduced by halfShape design is convenient for installation 3. Stepper Motor Technical Specifications Part No.: 23HS2430BFrame Size: NEMA23Step Angle: 1.8 degreeCurrent: 3.0A/phaseResistance: 1.6 Ohm/phaseInductance: 6.8 mH/phaseHolding torque:280N.cm/28kg-cm;425 oz-inRotor inertia: 800g-cm2Number of wire leads: 4Weight: 1.66 kgLength: 112mm General Specification:Step angle accuracy:+ - 5%(full step,not load)Resistance accuracy: + - 10%Inductance accuracy:+ - 20%Temperature rise: 80deg Max(rated current,2 phase on)Ambient temperature ----------—20deg ---- +50degInsulation resistance:100ohm Min,500VDCInsultion Strength--------500VAC for one minute Datasheet(23HS2430B,Front shaft 8mm dia and 21mm length,back shaft 8mm dia and 11mm length,425 oz-in or 28kg.cm holding torque) This product also has a single shaft for choice, the need to invite the message. Wiring: Stepper motor's red wire connect to driver's A+ portStepper motor's green wire connect to driver's A- portStepper motor's yellow wire connect to driver's B+ portStepper motor's blue wire connect to driver's B- port 400W 36V 11A DC Switching power supplySpecificationModel: S-400W-36VOutput Current:11AOutput Voltage:36VOutput Frequency:85%Output Power: 400WIt comes with built-in cooling fanConnection instructionL: Live wireN: Negative wire+V: DC power output “+”-V: DC power output “-“+V ADJ: output voltage regulation110V or 220VInput: 110-120V AC or 220-240VPlease flip the side input voltage selector switch 5.Usage or Application This products are widely used in engraving machine, printer, medical equipment, embroidery machine, stage lighting, textile automation, printing, packaging and other industries automation equipment. Feedback: We maintain hightest buyer ratings > Positive Feedback will be much appreciated from you. > Any dissatisfaction,please contact us immediately! > Please do not leave neutral or negative feedback before we help you out. Returns: > Defect: We will fully refund or send you a new replacement,please contact and return within 30 days. > Dissatisfaction: Please contact within 3 days, we will fully refund, after got your returned goods. > Missing parts/Q'ty: Please contact us immediately,for a new package arranged,or a partial refund issued. Contact us: > If have any question, Please contact us by ebay message before leaving neutral, negative feedback or open any dispute, we will reply within 24hours, ensure that help you solve the problem, make you satisfied.

Price: 190 USD

Location: Dallas,TX

End Time: 2024-12-11T13:00:01.000Z

Shipping Cost: 0 USD