Valve Cover Gasket - FORD BIG BLOCK V8 "ULTIMATE" Silicone Set of 2 #RG-13049FR

Description: Valve Cover Gaskets - "ULTIMATE" SiliconeforFORD BIG BLOCK V8 "ULTIMATE" SILICONE IS FIBERGLASS REINFORCED SILICONE. This may be the last gasket you will ever need to buy! – There is a layer of fiberglass centered between 2 layers of silicone that gives the material dimensional stability and higher tensile strength. – Therefore, this material is resistant to deterioration by weathering or engine oil and remains flexible over the temperature range noted. As a result, they provide excellent performance in high temperature environments. – The gaskets are made from aerospace mechanical grade silicone and will not break down and deform or crack up like cork or neoprene and leak. – In addition, the gaskets will withstand operating temperatures from -100 to 500 degrees Fahrenhiet. – Best of all, it is a reusable gasket. (see pictures) FITS: FORD BIG BLOCK - V8 1958-1978 for 330, 332, 352, 360, 361, 362, 389, 390, 406, 410, 427, & 428 CID Part # RG-13049FRCorresponding part #: FelPro VS13049 / Detroit 19330; FVC-5FRSet of two "ULTIMATE" silicone gaskets - gaskets are 1/8" thick.There are five (5) bolt holes in each gasketRe-usable. INSTALLATION INSTRUCTIONS:Wash the cover and cylinder head surfaces with solvent. Remove all traces of oil. The gasket must be installed DRY - do not use oil or lube of any typeTORQUE to 45-50 INCH poundsRe-check torque, one time with engine hot.DO NOT OVER TIGHTEN - it causes the gasket to bulge or squeeze out. Directions are printed on the package label. TO RE-USE GASKET: Wash gasket in hot soapy water, rinse well, and dry all surfaces thoroughly. Re-install using the above installation instructions. PROUDLY MADE IN USA. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ USE CORK? GET REAL! REAL Gaskets that is… REAL Gaskets Tennessee is a manufacturer of silicone rubber gaskets for aircraft, automobile, and motorcycle engines. Our silicone rubber gaskets are made from aerospace mechanical grade AMS silicone, designed to withstand temperatures up to 400 degrees Fahrenheit and to last the life of the engine. Our gaskets seal uneven surfaces, eliminate corrosion and are 100% reusable. We manufacture valve cover gaskets for: Aircraft: Continental, Franklin, Lycoming, Pratt & Whitney and Wright radial piston aircraft engines. Automobiles: Ford, GM, Mopar, Porsche and VW automobile engines. Motorcycles: BMW, Harley-Davidson, Suzuki, BSA, Ducati, Moto Guzzi, Norton, Triumph, Saab and most other motorcycle engines. If you are tired of oil leaks, then a silicone rubber gasket is the only way to go, and REAL Gaskets Tennessee is the only place you can get “The Original” silicone rubber gasket. MADE IN THE USA.

Price: 50 USD

Location: Elizabethton, Tennessee

End Time: 2024-10-29T18:39:19.000Z

Shipping Cost: 11.95 USD