Valve Cover Gasket Set - FORD Small Block V8 -"ULTIMATE" Silicone #RG-50029FR

Description: VALVE COVER GASKET SET - "ULTIMATE" SILICONE forFORD, LINCOLN, MERCURY - SMALL BLOCK V8 **THE "ULTIMATE" SILICONE GASKET IS FIBERGLASS REINFORCED ** **ATTENTION: If you are using thin steel valve covers, do not use this fiberglass reinforced gasket. Use the silicone gasket RG-50029 instead.** This may be the last gasket you will ever need to buy! - A layer of fiberglass is centered between 2 layers of silicone and gives the material extra stability and ultimate strength. This is the absolute most stress that a material can resist while being pulled or stretched which makes this one tough gasket. - The material is resistant to deterioration by weathering and engine oil and remains flexible over the temperature range and withstands temperatures from -100 to 500 degrees F. - The gaskets are made from aerospace mechanical grade silicone and will not break down and deform or crack up like cork or neoprene. - This is a reusable gasket. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fits: FORD - LINCOLN - MERCURY - Small Block V/8 - 255, 260, 289, 302, 351 WINDSOR Years: 1962-1987 - 5-LITER ENGINE Years 1988-1995 Part #: RG-50029FROther part #'s: Fel Pro VS 50029 C, HZ-7486 Previous part #: FVC-1FR - Set of two (2) "Ultimate" silicone gaskets - Gaskets have six bolt holes and are 1/8" thick. - Reusable silicone gaskets. INSTALLATION INSTRUCTIONS:Wash the cover and cylinder head surfaces with solvent.Remove all traces of oil.The gaskets must be installed DRY. (Use NO oil or lube of any type).TORQUE TO 45-50 INCH POUNDSDO NOT OVERTIGHTEN!- it causes the gasket to bulge or squeeze out. TO REUSE GASKET: Wash gaskets briefly in hot water and soap.Rinse well and dry all surfaces thoroughly. Re-install using the above installation instructions. DO NOT SOAK IN SOLVENT OR GASOLINE. Proudly made in the USA. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ USE CORK? GET REAL! REAL Gaskets that is… REAL Gaskets Tennessee is a manufacturer of silicone rubber gaskets for aircraft, automobile, and motorcycle engines. Our silicone rubber gaskets are made from aerospace mechanical grade AMS silicone, designed to withstand temperatures up to 400 degrees Fahrenheit and to last the life of the engine. Our gaskets seal uneven surfaces, and eliminate corrosion. Gaskets are 100% reusable. We manufacture valve cover gaskets for: Aircraft: Continental, Franklin, Lycoming, Pratt & Whitney and Wright radial piston aircraft engines. Automobiles: Ford, GM, Mopar, Porsche and VW automobile engines. Motorcycles: BMW, Harley-Davidson, Suzuki, BSA, Ducati, Moto Guzzi, Norton, Triumph, Saab and most other motorcycle engines. If you are tired of oil leaks, then a silicone rubber gasket is the only way to go, and REAL Gaskets Tennessee is the only place you can get “The Original” silicone rubber gasket. MADE IN THE USA.

Price: 54 USD

Location: Elizabethton, Tennessee

End Time: 2024-11-29T19:16:24.000Z

Shipping Cost: 12.95 USD