Waveshare SIM8202G-M2 5G HAT for Raspberry Pi 5G/4G/3G Support Snapdragon X55

Description: DESCRIPTIOn Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product, or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian.SIM8202G-M2 5G HAT With Antennas, 5G/4G/3G Support, Snapdragon X55 Onboard, Multi Mode Multi Band, Applicable For Regions With 5G Sub-6G Signal CoverageSIM8202G-M2 5G HAT FOR RASPBERRY PIComes With SIM8202G-M2, Supports 5G/4G/3G, Supports 5G SA And NSA,Multi Mode Multi Band, Applicable For Regions With 5G Sub-6G Signal Coverage Except The AmericasThis 5G/4G/3G Raspberry Pi communication HAT adopts SIMCom 5G module SIM8202G-M2, supports 5G NSA and SA networking, providing data rate up to 2.4 Gbps (DL) / 500 Mbps (UL). Simplified four antennas design, smaller size, suitable for space-limited applications.The base board features standard M2 connector, allows connecting with different 4G or 5G communication module with M2 package. There are also USB3.1 port, audio jack and decoder, SIM card slot, etc. Combined with our configuration script and development resources, it is easy to enable 5G high speed communication for the Raspberry Pi or computer. The 5G HAT is ideal for fast evaluating 5G modules, as well as being integrated into sorts of applications where 5G connection is required.Features At A GlanceStandard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson NanoComes with SIM8202G-M2 core module, based on Qualcomm snapdragon X55 platform, with multi mode multi band supportSimplified four antennas design, smaller size5G/4G/3G communication supportUSB3.1 port for testing AT commands, sending messages, cloud communication, making phone call, getting GNSS positioning data, etc.SIM card slot, supports 1.8V / 3V SIM card2x LED indicators, easy to monitor the working statusAT command support, based on 3GPP TS 27.007, 27.005 and V.25TER command setOnboard audio jack and audio decoder, allows audio operation like making phone callMulti-constellation dual-band positioning: GPS, GLONASS, Beidou, Galileo, and QZSSOperating system support: Windows/Linux/AndroidComes with quality acrylic case and cooling fan, nice looking, better heat dissipationSpecifications SIM8200EA-M2SIM8202G-M2Frequency bandSub-6G (SA)n1, n2, n3, n5, n7, n8, n12, n20, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79 (n79 is only available for SIM8202G-M2)Sub-6G (NSA)n41, n77, n78, n79 (n79 is only available for SIM8202G-M2)LTE-FDDB1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71LTE-TDDB34, B38, B39, B40, B41, B42, B43, B48WCDMAB1, B2, B3, B4, B5, B8GNSSGPS, GLONASS, Beidou, Galileo, and QZSSData rateSub-6G2.4 Gbps (DL) / 500 Mbps (UL)LTE1 Gbps (DL) / 200 Mbps (UL)HSPA42 Mbps (DL) / 5.76 Mbps (UL)Software functionsOperating systemsWindows/Linux/AndroidCommunication protocolsTCP/IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.0SMSSupports MT, MO, CB, Text, PDUFirmware upgradeSupports firmware upgrade via USB portHardware infoSIM card1.8V/3.0VPower supply5V 3AAntenna connector6x IPEX-4 connector4x IPEX-4 connectorModule dimensions52.0×30.0×2.3mm42.0×30.0×2.3mmApplicationsApplicable regionsRegions with 5G Sub-6G signal coverage except the AmericasApplication examplesCPE, Smart gateway, Drone, Live streaming, Remote medical treatment, Intelligent security5G Module ComparisonCompatible Hardware Interface, Identical Software FunctionSIM8200EA-M2 the 6x antennas version (left), SIM8202G-M2 the 4x antennas version (right)Multi Mode Multi BandApplicable For Most Of The Countries And RegionsBased on Qualcomm snapdragon X55 platform with multi mode multi band support.Applicable for regions with 5G Sub-6G signal coverage except the AmericasSupports 5G NSA (4G+5G common networking) and SA (5G standalone networking).* the frequency band diagram above is for reference only, please confirm the supported bands according to your local service provider.Multi System SupportSupports Windows/Android/LinuxJust plug it into USB port, go through some driver installation and simple configuration, the high speed 5G network connection would be ready to useMulti Host SupportEnabling 5G High Speed Connection For Raspberry Pi And Windows ComputerSub-6G: up to 2.4 Gbps (downlink) / up to 500 Mbps (uplink)*LET: up to 1 Gbps (downlink) / up to 200 Mbps (uplink)*HSPA+: up to 42 Mbps (downlink) / up to 5.76 Mbps (uplink)** stands for idealized data rate, the actual data rate depends on factors like network coverage, traffic congestion, base station condition, etc.Cloud CommunicationSupported Communication Protocols:TCP / IP / IPV4 / IPV6 / Multi-PDP / FTP / FTPS / HTTP / HTTPS / MQTTS / DNS / SSL3.0Multi-Constellation Dual-Band PositioningSupports GPS, GLONASS, Beidou, Galileo, And QZSSPhone Call & SMS SupportAllows Using AT Commands To Make Phone Call Or Send SMSApplication ExamplesMore PossibilitiesSetup IntroductionWhat's On BoardRaspberry Pi GPIO headerUSB3.1 portAudio drive circuitAudio jackResetPower switch5V 3A input5V to 3.3V translator 5V to 1.8V translator5V to 4.3V translatorPower indicatorNetwork indicatorM.2 connectorSIM8202G-M2Antenna connectorFan connectorSIM card slotOutline Dimensions PACKAGE CONTENT Weight: 0.259 kgThe power supply of this product is not included, it is recommended to used with a 5V/3A Power SupplyOPTIONS Protection case kit x1M.2 TO 4G/5G HAT x1OPTIONS SIM82XX-M2 5G module x1Antenna 4pcs x1IPEX adapter cable 4pcs x12*20PIN pin header x1Passive GPS antenna x1Dual plug USB3.0 cable x1USB3.0 adapter x1USB2.0 adapter x1SMA protective cap 4pcs x1Screws pack x1

Price: 345.79 USD

Location: Shenzhen

End Time: 2024-08-28T07:56:55.000Z

Shipping Cost: 0 USD