Description: NOTE: Check power first: DON'T exceed 20A for NO-C, or 10A for NC-C. Do NOT power this device with 110 V, always use a low-voltage power source (12-24 V or USB C).SPECIFICATIONS:Model Number: ZEN17Z-Wave Signal Frequency: 908.42 MHzPower: 12 - 24 V / USB CMaximum Load: NO-C: 20 A, NC-C: 10 AZ-Wave Range: Up to 250 feet line of sightDimensions: 4" x 2.5" x 1.5"Operating Temperature: 32-104° F (0-40° C)Installation and Use: Indoor only Will it work with my smart speaker?Smart speakers are not Z-Wave controller so you will need a Z-Wave hub to control this device with voice.Z-Wave hubs include:with SmartThingsHome AssistantHubitat 2 SMART OUTPUTS: Control 2 dry relays independently with Z-Wave device. Choose from normally closed (10 A) and normally open (20 A) relays to automate almost any electrical device. Connect an optional wall switch for physical on/off control or use your Z-Wave hub (required, sold separately) for wireless control. Your smart speaker is NOT a Z-Wave hub. This product is NOT supported by Wink or Z-Wave alarm panels. 2 SMART INPUTS: Monitor 12-24 V or dry inputs separately from the dry outputs. Connect analog binary sensors to receive status updates in your Z-Wave hub from a connected door sensor, water sensor, HVAC system, or alarm panel. Use the inputs to trigger the outputs automatically. AUTOMATE ANYTHING: Add Z-Wave connectivity to up / down DC motors in screens, motorized blinds, or awnings. Perfect to automate your garage door opener (use a single ZEN17 to control up to 2 garage doors independently), commercial gates, gas fireplace, sprinklers, doorbell, outdoor lighting, pool pump, whole house fan, and any 1-240 V device up to 20 A. QUICK INSTALLATION: Power it with a 12-24 V AC/DC power source or a standard USB C cable (included) and a power supply (sold separately). Wall-mount ready. Jumper wires NOT included. Do NOT power with 110 V! NEW 800 Z-WAVE: Enjoy better signal coverage and a stronger Z-Wave repeater for your mesh network with the latest 800 series chip. Long Range ready if your hub supports this feature! It comes with S2 authenticated and SmartStart for easy pairing. Remembers and restores on/off status after power failure. Built-in auto-on and auto-off timer available if your hub supports advanced settings. The device is ETL certified and conforms with North American safety standards. HUB COMPATIBILITY: This is an advanced Z-Wave device and it requires an open Z-Wave hub to display correctly. It was tested to work well with Hubitat, Home Assistant, HomeSeer (on 3.0.6.0 Z-Wave plug-in or higher), and with SmartThings with a custom device handler (please go to support page for details). NOT supported by ADT Pulse, Vivint, Wink, Ring, Alarm.com, or other panels.
Price: 57.6 USD
Location: Norfolk, Nebraska
End Time: 2024-09-08T10:38:13.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
EAN: 0853478006179
ISBN: 0853478006179
Package Dimensions LxWxH: 5.39x3.86x2.32 Inches
Weight: 0.71 Pounds
Type: Does not apply
Brand: ZOOZ
