Zinc Sheet .020 inch X 44 inches X 120 inches

Description: ZINC SHEET .020" Thickness Best for vertical applications such as walls, doors and backslashes. .020" sheets are NOT recommended for counter tops, because they won't hold up like a thicker sheet. Buying a full sheet gives you the best value. The cut sizes have a tolerance of +/ 1/8". We recommend you order a piece that is larger then you need. PVC Protective Peel off film is available on all sheets for a extra $2 per sheet, Must request at time of ordering Shipping: These pieces will be rolled into a box and shipped UPS. Once you receive the sheets you can unroll them and lay a board on top to straighten them out overnight. Shipping Warning- the most economical way to ship .020, .027, .030 sheets is via UPS rolled up in a box. However 5-10% of the time UPS can damage the edges of the sheets in transit. UPS most likely won't cover this via there insurance, so we recommend it you do need the full width 28", 39" or 44" then have the sheets shipped via freight. You must call to have it done that way. Most people however don't need the full width, will be cutting off some of the edge or folding it under, so if that is OK then shipping UPS is fine. WARNING Due to the nature of product, some scratches and blemishes should be expected. Metal sheets, just like their antique counterparts, may contain a certain amount of flaws, smudges, and scratches especially after shipping. Most of these marks can be buffed out using 0000 Steel Wool once the sheet is installed. IMPORTANT make sure you unroll and reverse lay the sheet to help it relax and flatten back out faster. You also may apply some heat to help relax it. If you leave the sheet in the shipping tube for more then 10 12 days then it becomes harder to flatten.

Price: 248 USD

Location: San Leandro, California

End Time: 2024-10-08T18:02:31.000Z

Shipping Cost: 9.85 USD